|
|
| Products 91 to 120 of 157 |
Linear Servo Motors
Linear Slides and Stages
Miniature Linear Stages
Belt Driven Linear Actuators
Linear Motor Positioners
Ball Screw and Lead Screw Tables
|
|
| Electro-mechanical actuators are packaged linear actuators in a ram style format with integral motors. They are used in applications where sealed, compact actuators are required with high power to weight ratios for precise actuation and positioning. Actuator load ratings range from 0.5 kN to 400 kN for light to high duty applications. |
|
RACO's linear actuators with tooth belt drive or spindle drive for single- and multiple-axis movements, put together for specific requirements with the motor drives required such as RACO's intelligent positioning motor, servomotors or step motors and the amplifier and control units as a system application. Or is may also be integrated into existing systems as individual building blocks.
Technical highlights:
stroke to 9 m
linear speed up to 17 m/s
linear thrust to 20,000 N
positioning accuracy up to 0.08 mm
no energy consumption at stop
accessories and electronic modules of RACO's electric actuators can be integrated
|
|
Acme or ball screw linear actuators.
Right Angle Design - High efficiency worm gear drive.
Parallel design - Timing belt drive to perform high linear speeds.
Lifelong grease lubricant. Minimum axial backlash.
Performing noiseless and running with high accuracy.
AC or DC motors.
Linear speed up to 500 mm/sec
Load up to 80 kN |
|
At last, an all electric SKF cylinder performing with the power of hydraulics and the velocity of pneumatics.
SKF cylinders using SKF planetary roller screws are expanding the limits of linear cylinders. They are designed for long life, high acceleration and high force applications. The cylinders use brushless servomotor technology, with an in line or parallel drive as standard. |
|
Electric Linear Actuator – INDACT® – Orthogonal-mounted Motor Series
ECO (1,7-100KN)
• Electric Linear Actuator featuring orthogonal-mounted motor, by the means of worm-screw/worm-wheel gear, for industrial application.
• 6 different sizes (ECO1, ECO2, ECO3, ECO25, ECO50, ECO100).
• Wide range of linear Force/Speed for each size.
• Max nominal force up to 100KN.
• Max linear speed up to 78mm/sec.
• “T” version, featuring Trapezoidal spindle (self-locking).
• “S” version, featuring Ball Screw spindle (high efficiency).
• Powered by AC/3-phases/IP54 motor.
• Duty Cycle 25%.
• Grease lubricated.
Strong industrial design provides maximum performance together with highest reliability, to meet the toughest requirements in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
Electric Linear Actuator – INDACT® – In-line Series
ECU (0,25-60KN)
• High efficiency Electric Linear Actuator, featuring in-line motorization (with or without precision planetary gearbox), suitable for industrial applications.
• 5 different sizes (ECU0, ECU4, ECU5, ECU6, ECU7).
• Wide range of linear Force/Speed couples for each size.
• Max nominal force up to 60KN.
• Max linear speed up to 466mm/sec.
• “T” version, featuring Trapezoidal spindle (self-locking).
• “S” version, featuring Ball Screw spindle (high efficiency).
• Powered by AC/3-phases/IP54 motor.
• Duty Cycle 25%.
• Grease lubricated.
Strong industrial design provides maximum performance together with the highest reliability, to meet the toughest requirements in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
| Designed to convert rotary motion into linear motion, Roh'lix Linear Actuators are ideal for positioning operations in all types of machinery. They are available in 5 different sizes from 5 to 200 pounds thrust. Designed for easy installation, Roh'lix Linear Actuators provide up to 100 million inches of travel life with near zero backlash. |
|
as an alternative to hydraulic drives
|
|
Linear actuators of the "Junior" series are versatile push-rod actuators used mainly for:
diesel engine gas adjustment
metering equipment
points switching
tilting fixtures
operation of shutters
valve and slider operation
and many other applications
|
|
Xenus
100-240 VAC Digital CANopen Amplifier for Brushless/Brush Motors
Built-in position sensor (12 µ repeatability)
Moving-rod actuator
Moving-forcer motor
Matched Xenus and Accelnet controllers
High rigidity version with outrigger bearings
No lubricant, internal actuator bearing
Drop-in cylinder replacement
Quiet operation
Food-safe
Holding brake option |
|
Joyce/Dayton - Established 1873
Joyce/Dayton Linear Actuators are the newest addition to our extensive line of lifting and positioning equipment. Available in machine and ball screw designs these heavy-duty linear actuators can handle loads of up to 2000 pounds. Joyce linear actuators are offered in two distinct versions Motorized and Integrated.
All Joyce Motorized and Integrated Linear Actuators are designed for long service life and have been tested at full capacity for thousands of cycles to ensure trouble free operation. The lifting mechanisms consist of either a high tensile aluminum-bronze lifting nut or heat-treated ball nut connected to a heavy wall stainless steel lifting tube. The linear actuator housings are cast from rugged yet lightweight aluminum and include a cast mounting clevis or clevis option.
|
|
The Kerk® RGS - Rapid Guide Screw - is a screw-driven linear slide that offers exceptional linear speed, accurate positioning, and long life in a compact, value-priced assembly. The length and speed of the Kerk RGS is not limited by critical screw speed, allowing high RPM and linear speeds, even over long spans.
Standard leads include .100", .200", .500" and 1.00" (2.54, 5.08, 12.7 and 25.4 mm) travel per revolution. Many optional leads, both inch and metric based, offer everything from high efficiency to non-backdriving leads for vertical applications, eliminating the need for brakes. With Kerk's wide range of available leads, speeds of more than 60 inches per second (1.5 meters per second) are possible, rivaling belts and cables while offering superior positioning accuracy, repeatibility and axial stiffness.
The Kerk RGS slide includes a precision aluminum guide and carriage and is driven by a precision rolled stainless steel lead screw. The moving surfaces include Kerkite® high performance polymers running on Kerkote TFE coating.
The Kerk RGS has a unique, compact profile that provides exceptional torsional stiffness and stability for its size and weight. The integral mounting base allows support over the entire length if desired. Lengths up to 8 feet (2.4 meters) can readily be built, and longer lengths are possible on a special order basis.
The Kerk RGS comes standard with a wear-compensating, anti-backlash driven carriage. Additional driven or passive carriages can be added, along with applications specific customization. Linear guides, without the drive screw, are also available.
Kerk RGS® Linear Slides for motor and sensor mounting Now available, the RGSW and RGSWX Series configurations of the RGS Linear Slide simplify motor and limit switch sensor mounting. Both versions include slots for sensor brackets and mounting provisions for a flag on the carriage, while the RGSWX also includes a bracket for motor mounting. The motor, coupling and sensors are not provided, but a sensor mounting kit for a common optical sensor is available from Kerk (see Sensor Mount Kit). |
|
| Mtr3L is a linear reversing synchronous motor of the permanent magnet type with two stator windings, for single phase AC 50/60 Hz. Phase displacement of the excitation current is achieved by connecting a capacitor in series with one of the stator windings. Axial movement is determined by the resulting circular rotating field. Electrical reversal of the axial movement is effected by means of a single-pole changeover switch. The 12pole rotor causes to & fro when motor is energised. |
|
LINAK has developed electric linear actuator accessories over the years based on customers’needs. Accessories offered by LINAK include potentiometer, electric pulse encoders (reed switch), safety nuts, splines and LS/LSD (signals for end-stop).
|
|
Driving unit for a single linear actuator or two synchronized actuators with DC motor.
Parallel motion with synchronous position.
Push rod positioning control, speed and force control.
Through highly flexible programming capabilities, it is thus possible to custom tailor the programming to the customer specific needs.
|
|
Frame Sizes 2-3.5 inches, 51 – 89 mm
Stroke Length 3-18 inches, 51 – 455 mm
Maximum Continuous Force Rating 1350 lbf, 6 kN
Maximum Continuous Torque Rating 37 lbf-in, 4 Nm
Maximum Velocity 22 in/sec, 559 mm/sec
Maximum Motor Speed 2500 rpm |
|
SEA linear actuators series is designed for elevation tracking in photovoltaic panels installation with surface from 50 to 300 square meter.
3 sizes available, all self-locking.
Dynamic load capacity from 10 to 100 kN
Linear speeds from 1 mm/s up to 7 mm/s
Stroke lengths up to 1.500 mm
They all have self enclosed limit switches and positioning control via incremental bi-directional encoder. Available with either AC or DC motors. |
|
Venture has a variety of actuators both motorized or manual suitable for Solar Dish or Solar Array applications. These are available as Acme Screw or Ball Screw type actuators in various volages and mounting configurations as noted below.
Standard strokes 4, 8, 12, 18, 24, 32, 36, 40 and 52 inches (custom lengths available)
30% duty cycle motor rating
Optional features include;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / up to 1500 lb dynamic load
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Long Life Acme or Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for rectified 120VAC Gearbox Designs |
|
The new actuator series for solar photovoltaic systems
With the newly developed Aton 1, 2 and 3 linear actuators, elero Linearantriebstechnik offers reliable drive solutions for users of solar photovoltaic systems.
User advantages
- Extremely high statistic loads compared to required dynamic loads
- Corrosion resistance against environmental influences over long periods
- Very high reliability
- Modular system, flexible integration into existing and new systems
- Electronic limit switches, adjustable throughout the whole stroke
- Integrated overload protection
- Maintenance-free throughout the whole service life
Main features
- Statistic loads up to 60,000 N
- Optional voltages:
- 24 V DC
- 230 V AC
- 400 V 3AC
- Limit switch version:
- reed sensors
- electronic, programmable limit switches
- Integrated stroke measurement systems are possible
- Electronic overload protection
- Internal reference sensors
- Self locking |
|
The dual actuator system TWINDRIVE® has been developed to supply the growing demands for motorised systems in leisure beds. The TWINDRIVE system consists of the dual actuators TD1 and TD2, both with integrated control box and a control for adjustment of headrest and footrest.
TWINDRIVE is characterised by the very low built-in dimension, which makes it unique in this market, and gives much more free height under the bed than previous systems.
The TWINDRIVE systems also support integration of special features like massage, infrared control, and much more.
|
|
High Performance Electric Servoactuator – INDACT® – According to ISO 6431
ISOMOVE (1-20KN)
• Electric servoactuator by the means of a precision Ball Screw, suitable for high performance applications, featuring overall dimensions and mounting style according to ISO 6431.
• 6 different sizes (IM032, IM040, IM050, IM063, IM080, IM100).
• Wide range of Ball Screw Pitch selection for each size.
• 3 different motor drive solutions (Stepper, Brushless, Custom).
• “D” version featuring axial / direct mounted motor drive with zero-backlash coupling.
• “R” version featuring reduced / parallel mounted motor drive with zero-backlash belt gear.
• 2 different reduction ratio (1:1, 2:1 – “R” version only).
• Max Nominal Thrust up to 20KN.
• Max Linear Speed up to 1600mm/sec.
• High Efficiency mechanical transmission.
• Duty Cycle 100%.
• Grease lubricated.
Modular design according to ISO 6431 allows for maximum adaptability to the widest range of industrial high performance applications.
Wide range of standard accessories/features to ISO 6431.
Special execution on request, please contact Setec Group Italy.
|
|
Saia-motor for positioning, opening/closing or dosing
The new 20mm UAL linear actuator is a small powerhouse. With a resolution of 21 µm per full step, it has a constant force of up to 30 N over the full travel range of 15mm. The compact housing, with a 20mm external diameter, is supported by a direct cable outlet.
The design of the actuator can be engi-neered as a bipolar or unipolar stepper motor, as well as a synchronous motor (max. 50 Vac.). The flexible manufactur-ing of the actuator allows a customer-specific mounting flange and a tailor-made layout design to meet all customer needs. Therefore, the linear actuator has the best preconditions to be used in posi-tioning units, valves and dosing pumps, for example in medical technology or in locking systems. |
|
The P-653 OEM miniature piezo-motor linear slide was designed for OEM applications where small optics or micromechanical parts have to be moved or aligned quickly and precisely. It comes pre assembled on a PCB driver board.
The P-653 linear actuator outclasses conventional linear slides with its very high velocity of 200 mm/sec.
Features
* Long Travel Range for its small size 2 mm (only 8 mm long)
* True Linear Motor Driven Linear Slide, with out the Rotary Conversion Losses
* High Speed: up to 200 mm/sed
* Cost-Effective Drive for High Volume OEM Applications
* Comes Pre-Assembled and Mounted on a PCB Driver Board
* Self Locking Position Hold at Rest with no current required. |
|
| Canon Precision's actuator units are developed and designed by utilization and implementation of simulation techniques combined with motors, our core technology. These small sized, lightweight actuators, designed to customer specifications, have already been used in many applications, such as water boiler valve actuators, with very high levels of customer satisfaction. |
|
| Zaber's T-LA and T-HLA series products are computer controlled linear actuators with 0.1 um resolution and up to 60 mm travel. They are stand alone units requiring only a standard 15V power supply. Multiple units can be daisy-chained to the RS-232 port of any computer. They can also be daisy-chained with any other T-Series products. Convenient 6-pin mini din cables on the unit allow for direct interconnection between units in close proximity. For longer distances, standard cable extension can be used. Even the power is daisy-chainned, reducing the cabling necessary for large systems. |
|
LTA’s are designed to fit into your existing manual stages and other opto-mechanical components as a direct replacement for manual micrometers. The LTA series features a space-saving design with the motor and lead screw side-by-side. This reduces the actuator length by 50% and minimizes the negative effects of long cantilever loads on micro-positioning equipment. The non-rotating tip prevents wear and avoids periodic motion variations which can be caused by variable contact made between a rotating tip and the mating surface.
LTA’s are designed to fit into your existing manual stages and other opto-mechanical components as a direct replacement for manual micrometers. The LTA series features a space-saving design with the motor and lead screw side-by-side. This reduces the actuator length by 50% and minimizes the negative effects of long cantilever loads on micro-positioning equipment. The non-rotating tip prevents wear and avoids periodic motion variations which can be caused by variable contact made between a rotating tip and the mating surface.
- Up to 50 mm travel in a space saving design
- Non-rotating tip improves motion smoothness and has no wear
- Exceptional position sensitivity
- Adjustable limit switch prevents damage from over-travel
- Convenient manual positioning knob |
|
|
|
Electric actuators
