|
|
|
Listed below are all the Linear Positioning Electric Actuator models made by IAI. Many of the units below are available in Cleanroom Class 10 electric actuator versions. Additionally, several of the models shown below may be used in combination for point-to-point positioning, and others for advanced, interpolated motion.
|
|
DD & RAD ELECTRIC CYLINDERS
- Load capacities range from 1/4 to 20 ton
- Ball screw or acme screw actuated
- Worm gear driven, incorporates an alloy steel worm which drives a high strength bronze worm gear (drive sleeve).
- Worm shaft is supported on anti-friction tapered roller bearings.
- Drive sleeve is supported on antifriction tapered roller or ball thrust bearings.
- Jack housing is made of ductile iron
- DD or “Direct Drive” worm gear driven
- RAD with secondary worm gear reduction
|
|
The "ALS" consists of a fully enclosed housing unit with a rugged axial and radial bearing arrangement and long-term lubrication (low-maintenance). The housing is surface-treated and can be converted into a swivelling version by means of 2 pins. The standard version has a self-locking trapezoidal screw with a travelling nut and a drive shaft for mounting a suitable gear motor. The "ALSR" version consists of the "ALS" standard version plus a fully enclosed shaft and piston structure, with the tubes protected against corrosion. Countless motor options are possible using a choice of mounting flanges or bell housings and couplings. A ball screw with various nut assemblies can also be used instead of the trapezoidal screw.
To complete the product, there is a wide range of accessories such as stroke limiting devices, anti-turn devices and a choice of head types.
|
|
|
Rod type, single-axis robot YMS series features in low cost and yet high performance. Its use in combination with the ERCD controller which has an additional pulse train input function widens versatile application range.
|
|
ERC and ERC2 series - Easy to Use RoboCylinder
An electric cylinder with built-in controller offering the ultimate in simplicity.
Available as slider and rod type
|
|
RCA Series is a compact RoboCylinder with 24 VAC servo motor and optical encoder.
The product has widely been accepted not only as a compact, programmable, electro-mechanical alternative to air cylinders, but also its integrated PLC function and user-friendly SEL language have made RCA Series an absolute all-rounder in the factory automation.
|
|
Motorized Cylinders with guide EZA Series
Power supply: 200 - 230 VAC or 24 VDC
Marking: CE
Dimensions: 54 (w) x 38 (h) mm
Stroke: 50 - 300 mm
Max. thrust force: 140 N
Max. speed: 600 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 30 kg
Max. vertical transportable mass: 14 kg
Dimensions: 74 (w) x 52,5 (h) mm
Stroke: 50 - 300 mm
Max. thrust force: 400 N
Max. speed: 600 mm/s (200 - 230 V AC-type), 600 mm/s (24 V DC-type)
Max. horizontal transportable mass: 60 kg
Max. vertical transportable mass: 30 kg
|
|
|
Mini-RoboCylinder of RCL series with quiet 24 VDC linear motor: ultra-smal micro cylinder and micro slider: maximum speed of 1600 mm/s, maximum acceleration/deceleration of 2 G, load capacity up to 2 kg, and stroke of 30 - 288 mm.
|
|
RoboCylinder RCS is an electric actuator with ball screw, linear guide and 230 VAC servo motor. Using the know-how obtained from manufacturing 150 thousand axis robots, while retaining the features such as high rigidity, acc/decl, and speed control, the price has been lowered to match that of rod-less pneumatic cylinders.
RCS Series is the next generation electric actuator that employs a high-speed, constant thrust force motor, which maintains constant payload at speed ranging from low to high.
|
|
|
|
|
|
High Performance Electric Servoactuator INDACT According to ISO 6431
ISOMOVE (1-20KN)
Electric servoactuator by the means of a precision Ball Screw, suitable for high performance applications, featuring overall dimensions and mounting style according to ISO 6431.
6 different sizes (IM032, IM040, IM050, IM063, IM080, IM100).
Wide range of Ball Screw Pitch selection for each size.
3 different motor drive solutions (Stepper, Brushless, Custom).
D version featuring axial / direct mounted motor drive with zero-backlash coupling.
R version featuring reduced / parallel mounted motor drive with zero-backlash belt gear.
2 different reduction ratio (1:1, 2:1 R version only).
Max Nominal Thrust up to 20KN.
Max Linear Speed up to 1600mm/sec.
High Efficiency mechanical transmission.
Duty Cycle 100%.
Grease lubricated.
Modular design according to ISO 6431 allows for maximum adaptability to the widest range of industrial high performance applications.
Wide range of standard accessories/features to ISO 6431.
Special execution on request, please contact Setec Group Italy.
|
|
LAM1 linear actuator
Features :
24/12V DC motor
Maximum push load up to 600kg,
Pull load up to 400kg
Maximum stroke up to 500mm
Low noise, smooth speed
Built-in limit switchesifactory pre-setj
10% duty cycle (10 minutes)
Ambient temperature:-26C-+65C
Protective class: IP52
Accessories: potentiometers, hall sensor,
Over-heat protection
|
|
|
|
|
|
LINAK perfects movement in tracking systems
For solar panel tracking systems, LINAK offers several strong electric linear actuator solutions depending on your demand for force, stroke, length, and more.
For solar trackers LINAK has several solutions, but we have two main products, which we would like to recommend to you:
LA36 - Ideal Actuator for Solar Tracking systems
LA35 - Another Actuator for Solar Tracking systems
All suitable actuators for Solar Tracking systems
LA36 actuator
LA35 actuator
LA12 actuator
LA30 actuator
LA31 actuator
With LINAK you get
A specialist in electric linear actuator movement. More than 25 years of experience in the industry segment
Sales and service all over Europe, the Americas, Asia and Australia
A competent sparring partner, with great application and product know-how
A high degree of flexibility: small quantities, customised solutions
A broad product range for all demands
Non-corrosive housings and tubes
A long product life due to a robust construction
A low weight
Low current consumption solutions
Exact positioning
High IP rating 66 and 69K
|
|
Venture has a variety of actuators both motorized or manual suitable for Solar Dish or Solar Array applications. These are available as Acme Screw or Ball Screw type actuators in various volages and mounting configurations as noted below.
Standard strokes 4, 8, 12, 18, 24, 32, 36, 40 and 52 inches (custom lengths available)
30% duty cycle motor rating
Optional features include;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / up to 1500 lb dynamic load
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Long Life Acme or Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for rectified 120VAC Gearbox Designs
|
|
The new actuator series for solar photovoltaic systems
With the newly developed Aton 1, 2 and 3 linear actuators, elero Linearantriebstechnik offers reliable drive solutions for users of solar photovoltaic systems.
User advantages
- Extremely high statistic loads compared to required dynamic loads
- Corrosion resistance against environmental influences over long periods
- Very high reliability
- Modular system, flexible integration into existing and new systems
- Electronic limit switches, adjustable throughout the whole stroke
- Integrated overload protection
- Maintenance-free throughout the whole service life
Main features
- Statistic loads up to 60,000 N
- Optional voltages:
- 24 V DC
- 230 V AC
- 400 V 3AC
- Limit switch version:
- reed sensors
- electronic, programmable limit switches
- Integrated stroke measurement systems are possible
- Electronic overload protection
- Internal reference sensors
- Self locking
|
|
SEA linear actuators series is designed for elevation tracking in photovoltaic panels installation with surface from 50 to 300 square meter.
3 sizes available, all self-locking.
Dynamic load capacity from 10 to 100 kN
Linear speeds from 1 mm/s up to 7 mm/s
Stroke lengths up to 1.500 mm
They all have self enclosed limit switches and positioning control via incremental bi-directional encoder. Available with either AC or DC motors.
|
|
Designed for ease of use and versatility, the new RoboCylinder RCP2 series features high performance, high ridigity, and high functionality.
Two new width sizes - 73mm Slider Type and 35mm Rod Type - have been added to the lineup, giving you more flexibility for your application needs. In addition, significant technological enhancements have been made in all areas, such as lower operating noise, ease of maintenance, and multi-point positioning of up to 512 points.
|
|
|
|
|
|
High Performance Electric Servoactuator INDACT According to ISO 6431
ISOMOVE (1-20KN)
Electric servoactuator by the means of a precision Ball Screw, suitable for high performance applications, featuring overall dimensions and mounting style according to ISO 6431.
6 different sizes (IM032, IM040, IM050, IM063, IM080, IM100).
Wide range of Ball Screw Pitch selection for each size.
3 different motor drive solutions (Stepper, Brushless, Custom).
D version featuring axial / direct mounted motor drive with zero-backlash coupling.
R version featuring reduced / parallel mounted motor drive with zero-backlash belt gear.
2 different reduction ratio (1:1, 2:1 R version only).
Max Nominal Thrust up to 20KN.
Max Linear Speed up to 1600mm/sec.
High Efficiency mechanical transmission.
Duty Cycle 100%.
Grease lubricated.
Modular design according to ISO 6431 allows for maximum adaptability to the widest range of industrial high performance applications.
Wide range of standard accessories/features to ISO 6431.
Special execution on request, please contact Setec Group Italy.
|
|
Linear Actuators
MORE SOLUTIONS FROM US EQUALS MORE SUCCESS FOR YOU!
At Cleveland Motion Controls, we have always believed in giving you more choices. After all, your application is unique, so the servomotor you choose for it should be unique, too.
While the competition stacks their shelves with motors and hardware, we pack ours with engineered solutions. The truth is, our shelf contains just about any type of solution you could require, from simple integration components such as brakes, encoders and tachometers, to elaborate breakthrough designs.
In addition to our high power density selection of clean operating, low maintenance servomotors, we also provide you with a range of standard integration and custom engineered options to round out your solution.
|
|
Linear Actuators offer best fits for a variety of applications. With both standard and customizable stroke extensions, these families can range up to 915mm (36 inches) in length and provide full load forces as high as 6800N (1500lbs). Available in both DC (12, 24, 36) and AC (115, 230, 400) voltage models, these actuators can also be packaged with a wide selection of controls and assessories.
Common applications would include:
NC Machines and other factory automation processes
aircraft landing gears, wing flap control, wing sweeps, thrust reversers
ergonomics of surface height adjustments for optimum work environments
medical and office equipment where quiet operation is mandatory
work-tables, conveyors, loaders/unloaders
squeegee lift on floor clearners, throttle controls on salt spreaders
automatice security gate positioning
raising/lowering of mower decks
jig positioning for flexible assembly operations
and many, many more
|
|
MDrive Linear Actuator products combine leading all-in-one integrated step motor+driver technology with linear motion to deliver long life, high accuracy and unsurpassed repeatability, all in a package that is extremely compact and affordable.
MDrive Linear Actuator styles
Two (2) MDrive Linear Actuator styles are available:
* Non-captive shaft a screw extends through the MDrive product and moves axially as the motor rotates
* External shaft a rotating screw, integral to the MDrive motor, moves a screw-mounted nut axially
Precision rolled lead screws used with MDrive Linear Actuators are designed specifically for motion
control applications to deliver maximum life and quiet operation. Corrosion resistant and non-magnetic, screws are manufactured from premium grade stainless steel and available with optional teflon coating.
|
|
|
|
|
|
High performance integral linear actuators for "all electric" plastic injection molding machines
Thrust range 2,000 to 200,000 N
Speed up to 1 m/sec
High energy brushless permanent magnet servo motor
Integral high load ball lead screw, up to 80,000 N
Integral lead screw, high duty satellite roller type above 80,000 N
Built in absolute multiturn encoder
The range of integral linear actuators developed by Phase Motion Control for various linear positioning applications, and specifically to ease the replacement of hydraulic cylinders in plastic injection molding machines, delivers a complete functionality packaged in a single engineered unit.
The actuator consists of: A high performance, rare earth PM servo motor derived from the Ultract range, with a hollow shaft, which can take the fully retracted lead screw; A special front end with a high axial load bearing system (oblique contact ball bearing fin small units, barrel type conical roller bearings in the larger units) which houses the rotary nut of the lead screw, and which is driven by the motor part; In the back of the actuator, a multiturn absolute encoder which is used for electronic control of the electric piston across the stroke.
The actuators thus realized are endowed with exceptional stiffness and accuracy, travel speed up to 1 m/sec, can be controlled both in thrust and position, with repeatability better than 1/100 mm. All issues of screw lubrication, assembly, alignment, as well as the related drive train, are optimized and designed inside the unit.
|
|
ternary
Linear and rotary actuators
For positioning applications where pneumatic exceeds the capabilities regarding:
* Flexibility/programmability
* Repeatability
* Integration with Motion Control systems
* Soft touch
* Force control
* Set up & installation time
* IP-protection
Highlights at a glance
* all in one: motor, controller, actuator/gearbox, fieldbus interface
* Force up to 1000 N
* Repeatability +/- 0,009mm (0.00035")
* Stroke up to 300 mm with ballscrew
* Ratios from 5 to 25 with planetary gearbox
* Speed up to 900 mm/sec
* Maintenance free
* Flange size 32 +46 mm available
* IP protection 65 (linear) / 64 (rotary)
Applications
High speed format changes in packaging & woodworking machines, assembly & dosing systems, semiconductor handling, robots, and many more.
Products
* via PC software
* with Teach pendant
* PLC controlled (parallel I/O)
* Serial field bus
* CANopen
* DeviceNet
* PROFIBUS
|
|
DSL 56 - Linear Actuator
With its two variants the DSL 56 ensures optimal linear motions. As a roller screw assembly for high forces and high velocities or as a ball screw assembly in simple applications for low-cost linear drives.
Compactness, dynamic response and high levels of torque, effectively implemented in a linear motion these are the features of the DSL 56.
With its integrated screw assembly the DSL 56 converts rotary motion to linear motion. The link between Baumller servo motors and an integrated screw assembly is ideally suited for applications with maximum demands in terms of force and dynamic response, in a compact design.
There are two models available: the roller screw assembly for high forces and high velocities or the lower-cost ball screw assembly for simpler applications.Consequently, the DSL 56 optimally meets the requirements of fields of application such as robotics, welding tongs and handling but also in the printing and plastics industries.
|
|
Frame Sizes 2-3.5 inches, 51 89 mm
Stroke Length 3-18 inches, 51 455 mm
Maximum Continuous Force Rating 1350 lbf, 6 kN
Maximum Continuous Torque Rating 37 lbf-in, 4 Nm
Maximum Velocity 22 in/sec, 559 mm/sec
Maximum Motor Speed 2500 rpm
|
|
|
|
|
|
|
For a reliable positioning, flexible, with movements of adapted cycles, and an easy integration in the existing construction industries, do not seek further new electromechanical jacks EMC Rexroth. Thanks to their drive by their standard dimension and ball screw of precision ISO 15552, it is very easy to install and combine the advantages of the technique of drive of robust design with that of control and control. Electromechanical jacks EMC show the potential in the combination and collaboration in various Rexroth technologies. This overall principle `' loan-with-to install'' is made up exclusively of subsets manufactured in quantity starting from standard components of the leader of the linear, pneumatic and electric movement. The unit is available in six sizes offering variable lengths to 1500 Misters electromechanical jacks EMC are based on aluminum profiles for pneumatic jacks integrating of the screws ball rolled of precision balls. The profile is in conformity with the standard ISO 15552 and has sites to place sensors. Thanks to these dimensions standards, the users can combine the pneumatic and electromechanical jacks without any effort of design, and thus obtain a profit obvious on the technical plan and economic, an ideal solution for each specific application. If you wish it, Rexroth can provide the EMC with a servo-motor brushless standard MSK (IP65) or MSM, as well as engines step by step VRDM, adapted to the application, allowing a maximum speed of displacement of 96 m/min.
|
|
|
|
|
|
The Feed Modules from Rexroth are suitable for using in handling applications as vertical axes or actuators. The complete linear units reduce the necessary drive power due to the smaller dead weight being moved and can achieve extremely precise, infinitely variable positions.
The modules consist of a fixed aluminum main body, a profiled aluminum tube with eLINE Hybrid Technology and runner blocks and spindles of different pitches and sizes.
The spindle moves a profiled aluminum tube, the spindle sleeve into which two steel tracks are admitted. Two fixed runner blocks in the main body guide the spindle sleeve accurately and cushion high longitudinal and transverse torques. The quadratic main bodies with cross-sections of 50mm, 70 mm and 100 mm, rastered, cover strokes of up to 400 mm.
Another special feature is the quick and easy assembly using the easy-2-combine interface. This positive connection technology with centering rings saves laborious alignment. In addition, unlike in many conventional solutions, you are also spared specially manufactured adapters.
You can order the feed modules either with a flange or belt auxiliary transmission for mounting on motors, or ready assembled as complete axes. There is a wide range of servomotors or stepping motors with an absolute encoder or standard encode and an optional brake. Positioning the motor on the fixed main body makes the electrical connection easier for you.
|
|
|
|
|
|
Duff-Norton manufactures electromechanical actuators, mechanical actuators (screw jacks), linear actuators, ball screw actuators, machine screw actuators, electric cylinders, rollerscrews, rotary unions (rotating joints), and air jacks.
Electromechanical Linear Actuator Products include TracMaster and LinearMaster Actuators, Packaged Controls, Modular Actuators and PowerMaster Motor Cylinders and Synchro Cylinders.
This Duff-Norton product line of actuators features load capacities ranging from 100 pounds to 100 Tons, gear or belt drives, acme screw and ball screw systems with various AC and DC input voltages. Packaged Controls operate the extend and retract function of the actuator and are available for all Duff-Norton TracMaster and LinearMaster Electromechanical Linear Actuators.
Duff-Norton Electromechanical Actuation Products are specially designed for a variety of commercial and industrial applications. These actuators are used for opening and closing, tilting and pivoting, lifting and lowering and positioning. Applications include gates, dampers, oven and processing tank doors, antennas, orthopedic tables and other medical equipment, ergonomic furniture, and agricultural equipment, etc. Custom design is also available for special applications. Electromechanical linear actuators are now being used in place of pneumatics and hydraulics when high maintenance and environmental problems (leaking hydraulic oil) are a concern.
|
|
|
The linear jacks high efficiencies ELVP integrate a screw into satellite rollers of Rollvis mark, animated by a servo engine Bruschless (assembly with reducer or directly coupled with the screw). They are conceived for applications to high frequencies of use, asking one long life of life under loads and/or speeds high. Electromechanical jacks ELVP are equipped with a screw with satellite rollers. Why? The screw with satellite rollers is similar to the ball screw with the difference close the elements of transfer of charge are threaded rollers. The principal advantage of the screw with satellite rollers it is that it has a great number of contact point to transfer the load. It results from it a load capacity up to 3 times higher than that from the ball screws and a lifespan up to 15 times higher, while preserving an output which can reach 90%
|
|
Moog provides a wide range of custom Electro-Mechanical actuators for total axis control for industrial applications. All of our actuation products have the proven reliability and precision required for high performance motion control and long service life. Available in multiple sizes and with a selection of Moog-designed and built servomotors and drive electronics, actuation products are built to meet customers requirements.
Moogs total axis control solutions include the all-steel 887 series with the ability to accommodate peak forces of 350 kN [80,000 lbs.] It is a fully validated, tested option for the most demanding applications.
|
|
|
Power Jacks range of electromechanical linear actuators are available in capacities from 0.45kN to 400kN with linear speeds up to 7000 mm/min as standard. The products use machine screw, ball screw and roller screw drive technology in order to supply units suitable for intermittent or high duty continuous running applications. The linear actuators are available with features such as limit switches, encoders, brakes, inverter rated AC motors, DC motors, servo motors and hand wheels. The motor on the actuator can be positioned parallel, right angles or in-line with the actuators ram. For detailed information visit Power Jacks website at www.powerjacks.com
|
|
|
|
Electric linear actuators
