Testing rig - All industrial manufacturers in this category

Displacement vibration test system 35.6 kN | LDS V875LS Bruel and Kjaer

A new 76.2mm-displacement Vibration Test System was recently designed for large payloads, package testing, and shock testing applications. The V875LS is the only shaker in the 35.6kN force range with 76.2mm displacement and a large 640mm diameter mounting table. Uses...

NDIR test bench for exhaust gas SIBENCH SIEMENS Sensors and Communication

The SIBENCH is an optical measuring bench designed especially for use in exhaust gas testers. The volume concentration of the various gas components is determined on the basis of infrared absorption (NDIR). Gas-filled detectors with the unmatched...

Test rig for fuel and lubricant testing TKGT 1 SKF Maintenance and Lubrication Products

SKF Grease Test Kit TKGT 1 Portable grease analysis kit for use in the field Lubricant analysis is a vital part of a predictive maintenance strategy. However, until now, this has been almost completely related with oils, despite the fact that around 80% of bearings are lubricated with grease. Tribology knowledge...

Large size bearing test rig ø max. 3.5 m, 15 t | Astraios Schaeffler Technologies AG & Co. KG

Astraios – the most modern, largest, and highest performing large-size bearing test rig in the world The new test rig enables large-size bearings of up to 15 tons and measuring up to 3.5 meters such as those used in wind power applications in particular to be tested in realistic...

Filter test bench MAHLE

Test bench in accordance with VDI/DIN Directive 3926 Since reliable dust removal requires all components to be tuned to one another, technical filter parameters - especially those...

Automated test system COMAU S.p.A. - Powertrain Systems

The complexity of modern engines puts even greater demand on test systems to check a wide variety of engine operating. Our broad product offering addresses every specific requirement with high-customized...

Automated test system Z2090B Agilent Technologies

The Z2090B is an automated test platform with options to increase the capability of this standard design. The platform contains not just the specific hardware required but also the software, training, consulting, support and services needed to ensure a...

Burst test stand SCHULER - MÜLLER WEINGARTEN

In addition to conventional tensile testing, Schuler also performs bursting strength testing on the tube material. For this purpose Schuler has developed a mobile burst test unit, which the company also markets. The burst test permits an estimation of...

Immersion scanning machine NSR-S620D Nikon Engineering

The NSR-S620D incorporates three newly developed technologies — Bird's Eye Control, Stream Alignment,...

High stability spin test stand max. 10 - 6 300 kg, ø 200 - 2 700 mm | BI Series SCHENCK RoTec GmbH

BI 1 - 7 Over-speed test stands * Centrifuging rotors to the point of bursting * Disruptive resistant...

2

Test bench for actuator PV 1405 AUMA

The test bench is also used in the AUMA plants. Suitable for almost all AUMA actuators. And also for purchased actuators. Up to 6,000 Nm...

Calibration and test bench MCS100 Beamex

The MCS100 is a modular test and calibration system for workshops and laboratories. Available as a workstation, desktop cabinet or trolley, MCS100 offers efficient and ergonomic facilities for the maintenance of process instruments. Many applications The...

Electrical tester for photovoltaic plant 600 VCAT III IP54 - FTV 200 CHAUVIN ARNOUX

In the field, the FTV200 is ideal for checking solar panels. The FTV200 can be used to carry out tests in compliance with the EN 62446 standard on a panel or string of panels. With the FTV200, all the measurements are performed according to the IEC / EN 60891 standard....

Hydraulic test stand for metering pump MAHR

You must be able to rely on your Spinning Pumps 100%. Thats why we at Mahr Metering Systems check our Pumps before they leave the factory 100%. Your...

Test rig for the automotive industry 1000 - 14500 kg MOOG

We are a world leader in the design, development and manufacture of electric and hydraulic motion systems spanning a variety of key applications for payloads ranging from 1,000 kg (2,200 lbs) to 14,500 kg (32,000 lbs). Our motion systems can be tailored for specific applications in any number of Degrees of Freedom (DOF) configurations. We have built more than 1,300 motion bases for leading customers...

Hose test stand 2 000 bar, 25l/min | BC 2000 OP

Up to 2000 bars test...

5

Bogie test bench MULTIRAIL® BogieLoad pro Schenck Process

Two factors are decisive for bogies during inspections: precision and efficiency. MULTIRAIL® BogieLoad is a bogie test (bogie press) stand of the new, cutting-edge generation. One special feature is its fully electromechanical design with spindle technology, which...

3

Mobile inverter test bench L6000 Lenze SE

Benefit from our many years of experience in the development and mass production of industrial servo and frequency inverters, as well as implementation of electric and hybrid vehicles. This experience has allowed us to produce reliable and economically viable solutions - e.g. for your innovative test bench concept. Task...

Solar simulator 150 - 1 600 W MICRO-CONTROLE / Spectra-Physics

Oriel Solar Simulators provide the closest spectral match to solar spectra available from any source. For the most demanding applicaitons we have developed the Sol3A series that meet all...

Electric motor test stand BTM5 Balance Systems srl

Features: The BTM5 bench has been developed for quality control for assembled electric motor. The BTM5 bench can be used in a production...

Gearbox test rig 360T Gleason

Faster, more flexible CNC-controlled roll testing of spiral and hypoid gear sets - with either standard 90...

3

Tightness test stand for valve max. 500 mbar | TC series Elster Kromschröder

Tightness controls for checking two safety valves before or after burner run, with adjustable test period...

Filter test bench 336 cm² | Lab Unit M10 Alfa Laval

This module can be used with Alfa Laval’s large number of flat sheet membranes for ultrafiltration and microfiltration. The Alfa Laval LabUnit M10 is the ideal tool for training purposes and for research and...

Test rig component 0.1 pF - 20 mF | 815 B&K Precision

Component Tester Model 815 This handy capacitance meter (0.1 pF to 20 mF) and ohm meter (0.1 ohm to 20M...

Catalyst testing station TPDRO 1100 Thermo Scientific - Scientific Instruments and Aut

Thermo Scientific* TPDRO 1100 is a time-saving, high precision instrument designed for the characterization of heterogeneous supported catalysts and reactive solids. TPDRO performs automatically and simultaneously the sample preparation (activation) on a reactor while analyzing another sample...

Horizontal valve test bench 600 t | BO-2V/600 Think PC PROGETTI

Horizontal test rig with inner radial seal clamping style. The mobile reaction bridge is moved by two screwed columns that assure the complete absence of external forces on valve body. This prerogative makes it conform to the most diffuse international test standards....

86

Fuel cell test station max. 130 V, max. 100 kW CHINO

The equipment is PEFC type short stack evaluation test equipment consisted of gas supply line, moisturizing line, cooling line, cell performance line and safety line. Features Standalone and compact equipment Mixed gas with optional mixing ratio can be produced by setting...

Engine test bench DEWE-CA DEWETRON

DEWETRON CA instruments are the optimal fit in engine research, development and optimization because of its powerful analysis capabilities for many engine parameters and characteristics...

4

Residual contamination analyzer EcoCLab Dürr - Ecoclean

Particulate cleanliness constitutes one of the most important quality factors today, both in the automotive industry and in numerous other manufacturing sectors. However, checking and documenting this so-called technical cleanliness presents a challenge to OEM and tiered suppliers alike. Quite often the particles specified as critical are found on interior...

Hose test stand max. 5 000 bar Globe

The GLOBE hose test units are designed for fast, safe and accurate testing of hoses. Test units for hoses are available...

3

Friction testing machine COF series IMADA

COF series are fixtures ideal for coefficient of friction test (COF test) of paper or film. [Basic information] - Available in capacity from 2N (200gf) to 10N (1kgf). [Merits] - With included software, coefficient of static friction and coefficient of kinetic friction are automatically calculated,...

Electrical tester for photovoltaic plant 0 - 1 000 V, 0 - 20 A | PROFITEST PVsun GMC Instruments

With the PROFITEST PVsun, all required electrical safety tests at photovoltaic systems can be executed simply and safely in accordance with DIN EN 62446. The test instrument is suitable for testing PV modules and strings with up to 1000...

Electromagnetic dynamometer brake MAGTROL

Hysteresis Brake Dynamometers (HD series) are versatile and ideal for testing in the low to middle power range (max. 14 kW intermittent duty). Hysteresis Brakes do not require speed to create...

4

Pyrometric cone equivalent test bench PCE 428 NETZSCH-Gerätebau GmbH

Because of the heterogeneity of their composition and structure, ceramic refractories do not exhibit a uniform melting point. The refractoriness is characterized by the optical determination of the pyrometric cone equivalent (according to Seger), i.e. the temperature at which the tip of a cone made of the sample material softens to...