|
|
|
|
|
|
* Doubled walled stator design eliminates need for a universal joints or coupling rod.
* Available in Cost effective, portable-closed coupled (Motorised) design or Bare shaft design for flexibility of use of drives e.g. Mechanical speed variators, Diesel engine etc.
* Can be adopted for solar power motors.
* Suitable for metering, dosing with 90 to 95 % accuracy.
* Ideal Pump for the Australian and New Zealand Market.
Fluids Handled / Applications
Domestic – Cellar drainage, septic tank cess pit emptying, garden sprinkler systems, garden reticulation, water supply sampling from spears, wells, streams, dams, creeks, shallow bores and rivers and especially if the water is silted or sandy.
Industrial – General purpose pump for Wine, Beverage, Weak Acids & Alkalis transfer, sump duties, septic and sullage disposal, brine injection, spear point, Diesel, Lubricating Oil, Water Based Inks, Vegetable Oils, Plating Solutions, Fluids with suspended solids e.g. Dirty water from cesspools, Domestic water transfer.
Agriculture – Irrigation, Cattle Manure and like.
|
|
- ORP controller and dosing pumps in one compact unit.
- ±5 mV accuracy with unbeatable performance.
- Isolated 4 to 20 mA recorder output.
- Proportional dosing slows the pump down when the measured ORP level approaches the set value which avoids over dosage of oxidizing or reducing agents.
- Alarm contact is activated whenever the ORP reading varies more than 200 mV from the set point.
- Auxiliary contacts allow the user to attach a mixer or priming pump that is activated only when the pump is dosing.
- High Quality materials are used for all parts that come into contact with liquid.
|
|
- Solenoid-driven Diaphragm Metering Pumps
MAGDOS LT
MAGDOS LC
MAGDOS DE/DX 01...12
MAGDOS DE/DX 20...100
- Motor-driven Diaphragm Metering Pumps
MINIDOS A
MIDIDOS E
MEMDOS E / DX 4...150
MEMDOS E / DX 160...380
MEMDOS GMR
MEMDOS MR
- Motor-driven Piston Metering Pumps
FEDOS E/DX
REKOS KR
KARDOS KN
KARDOS N
|
|
High Fashion Flowing Apparel:
Viscose and Polyester Silk made with Feinpruef Spinning Pumps by Mahr Metering Systemsvon Mahr Metering Systems
Application
Your Filaments are Our Business Your production depends on exact metering of the materials you process, and your Spinning
Pumps must be precisely tuned
to the specific requirements
of your manufacturing process. Mahr Metering Systems has a wide product range that covers virtually all applications – including yours.
- Filaments for highly elastic stretch fabrics
- hollow fiber for medical and filter purposes
- fibers for high strength applications such as safety belts
- fine denier fiber for the finest of haute couture
|
|
LMI Pump : ELECTROMAGNETIC dosing pumps, the LMI range is electronically operated. Flow rates up to 76 l/h and pressures up to 135 bar.
G™ Pump : Motor-driven dosing pumps with mechanically actuated diaphragms. Flow rates up to 1200 l/h and pressures up to 12 bar.
mROY® Pump : HYDRAULICALLY actuated diaphragm dosing pumps. Flow rates up to 310 l/h and pressures up to 123 bar.
MAXROY® Pump : ELECTRIC MOTOR-driven hydraulically actuated diaphragm dosing pumps. Flow rates up to 1100 l/h and pressures up to 28 bar.
MILROYAL® / PRIMEROYAL® Pumps : These HIGH FLOW and HIGH PRESSURE dosing pumps present a huge capacity of adaptation to meet the specific requirements of your industrial processes. Flow rates up to 50,000 l/h and pressure up to 500 bar.
Automatisms - Regulation : A range of systems for flow rate automation.
Accessories : A wide range of accessories to round off any dosing pump facility
|
|
|
|
|
|
Motor Driven Pumps Spring Series
Plunger Piston Metering Pumps PS1 Series
PS1 pumps are plunger piston metering pumps featuring a spring return mechanism in an aluminium housing.
Capacity: from 1,5 to 304 L/h
Max pressure: 20 BAR
Stroke rate: 58 • 78 • 116 strokes/minute
Motor: standard 0,18 and 0,25 Kw (IP 55)
Stroke length: 15 mm
Plunger Piston Metering Pumps PS2 Series
PS2 pumps are plunger piston metering pumps featuring a spring return mechanism in an aluminium housing.
Capacity: from 40 to 1000 L/h
Max pressure: 20 BAR
Motor: standard 0,25 • 0,37 • 0,55 • 0,75 Kw (IP 55)
Stroke length: 25 mm
Mechanical Diaphragm Metering Pumps MS1 Series
MS1 pumps are mechanical diaphragm metering pumps featuring a spring return mechanism in an aluminium housing.
Capacity: from 5,5 to 460 L/h
Max pressure: 10 BAR
Motor: standard 0,18 • 0,25 • 0,37 Kw (IP 55)
Stroke length: 2 mm • 4 mm • 6 mm
Mechanical Diaphragm Metering Pumps
MS0 Series
MS0 pumps are mechanical diaphragm metering pumps featuring a spring return mechanism in a plastic housing.
Capacity: from 17 to 47 l/h
Max pressure: 5 bar
Diaphragm diameter: 50 mm
Motor: standard 0,08 kw (IP55)
Stroke length: 2 mm
|
|
Features
- Individual control board for each pump Programmable duration of each injection
- Self-Priming Pump Continuous Run Setting
- On-Board Prime Button Stackable Pump Head
- Variable Speed Adjustment
- Watertight and Durable Enclosure
- Selectable Cycles per Day
- Pump Inication Light
- External On/Off Switch
- 2.8 gal/hour Maximum Rate
The SF-4000 and SF-6000 dispensers are ideal for applicactions requiring daily chemical maintenance. The SF-4000 is a single drive system and the SF-6000 is a dual drive system that can be used for two separate chemicals or for two separate locations. These can be used as stand alone units for periodic injection of maintenance chemicals or can be used in conjuction with an automatic controller.
|
|
* Hydraulic diaphragm pumps AX series
The highest riliability system metering pump
Max. discharge capacity: 51.6/49.7 L/min
Max. discharge pressure: 5.0 MPa
Main materials: PVC, SUS316
more
* Mechanically-driven diaphragm pumps LK series
Applicable to the many diverse needs of chemical feeding
Max. discharge capacity: 45/54 L/min
Max. discharge pressure: 1.5 MPa
Main materials: PVC, PVDF, SUS316
more
* Mechanically-driven diaphragm pumps SK series
Answer to wide-range application from inclusion into a system to plant facilities
Max. discharge capacity: 1.1/1.32 L/min
Max. discharge pressure: 1.5 MPa
Main materials: PVC, PVDF, SUS316
|
|
Serie LK
Compact and light weight metering pump
The specific feature of the LK series ist the dual-cam driving section with a highly reliable worm gear type speed reducer. Achieving maximum wear resistance in continous operation was a goal of the construction. The result is the employed compact and rigid mechanism. An outdoor installation is due to the fully enclosed oil bath lubrication possible.
Various Typs and material
Fitting for nearly any application a various number of pump sizes are available. Moreover six different material combinations can be choosed for the pump heads. So most applications can be covered. To select to best fitting connection, flange, hose and pipe connections are available as standard.
|
|
The EW Series is the flagship of the E-Class with capacities up to 6.7 GPH (25.4 l/h) and a maximum pressure of 150 PSI (10 bar). Compact, powerful and packed with a variety of innovative design features the EW can enhance any feed application.
IP65 Construction
The rugged Polyphenylene Oxide (PPO) enclosure is equipped with a durable clear cover to protect the membrane switches and stroke control of the pump, which are mounted opposite the liquid end. The display utilizes a high temperature LCD that provides extra protection from sunlight in outdoor applications.
|
|
|
|
|
|
The new K-Tron Bulk Solids Pump (BSP) feeders have been specifically designed and engineered to provide gentle, precise feeding of free-flowing pellets, granules, flakes, powders and friable products.
The BSP feeders do not use the usual screws/augers, belts or vibratory trays to convey the material. The feeder utilizes positive displacement action to feed free flowing materials with astounding accuracy, offering uniform discharge, consistent volume and gentle handling.
The BSP feeders have vertical rotating discs that create a product lock-up zone, conveying the material smoothly from storage hopper to discharge outlet, achieving true linear mass flow.
Utilizing a simple design and the principle known as "lock up" (see demonstration), the material in the feeder is moved together in true positive displacement, producing excellent linearity and breakthrough accuracy levels.
With no pockets or screws and only one moving part, the compact feeder is cleaned in seconds, making it ideal for applications with frequent material changes.
|
|
Characteristics
- Horizontal or Vertical.
- Single Stage.
- Enclosed Impeller.
Applications
- Water.
- Waste Water.
- River Water.
- Rain Water.
|
|
General description:
ELADOS EMP metering pumps are reciprocating positive-displacement pumps with a special electrical motor drive which has been tried and tested in the field. The use of various types of controller means that the pumps can be adapted to any operating procedures for quantitative and proportional metering.
Features :Electric motor-driven diaphragm pump for dosing capacity 1,4 - 24,0 l/h
|
|
The MEMDOS DX motor-driven diaphragm dosing pump does not only stand out for its performance but also for its reliability, versatility and user-frienliness: The control is easy to understand and to operate.
MEMDOS DX pumps care totally leakage-free and thus also suitable for toxic and aggressive media.
On request, the MEMDOS DX pumps can also be supplied with a double-diaphragm system. Then uncontrolled leak-age of media is avoided even if the dosing diaphragm wears out.
Wherever high flow rates in controlled processes are required e.g. in sewage treatment plants. Thanks to the sturdy tappet drive with manual or automatic capacity adjustment, acids, lyes, precipitating agents and flocculents are dosed reliably and precisely.
|
|
|
Metering pumps with mechanically linked diaphragms are almost universally applicable in the low pressure range. They offer a favourable cost/performance ratio at minimum service effort.
|
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
|
|
Description:
* Holds 2, 4, or 6 syringes of up to 140 cc each
* Infusion rates from 0.568µL/hr ( 1 cc syringe) to 1337 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Higher flow rate models available
* Includes all the advanced functions and programming features of the NE-1000 family
* Pictured Syringe is for Demonstration purposes only
|
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
|
|
* Computer controllable: networkable up to 100 pumps
* Stand-alone operation: pre-program the pump with a dispensing program, then operate the pump from an attached Foot Switch, button, or I/O controller
* Add the OEM Starter Kit to run as a fully functional, stand-alone pump
Description:
* Does not have a built-in user interface
* Chassis mountable: 9 1/2"L x 4 1/4"W x 4 1/8"H (23.5 x 10.8 x 10.5 cm)
* Operates from a 12V DC power source
* Holds 1 syringe up to 60 cc
* Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
|
|
Introducing the Verderflex Aura, a low flow, high pressure dosing tube pump. Specifically designed to offer high performance in the smallest of packages, this pump is ideal for use in swimming pools, spas, saunas and leisure centres.
The Aura is extremely user friendly and requires no special training.
Features include an easy to access pump head with simple tuble load faccility for addional safety. THere are no moving parts to touch - the tube is loaded by the touch of a button.
Pump Features Include
Flows up to 79 ml/min (0.02 US GPM)
Pressure 0-4 bar (58 PSI)
IP66 / NEMA 4 enclosure
Start/Stop button
Fixed speed timer control
Timed dose - dose for up to 20 minutes with the touch of a button
Timed lock out - disable repeat dosing within a specific time, up to 20 minutes
Tamper evident plugs prevent unauthorised adjustment
Manual priming function
Easy tube load facility
2 rollor rotor
Easy to see LED and electroluminescent lighting
|
|
High Pressure
Blue-White's FLEX-PROTM A3 Peristaltic Metering Pump has Outstanding Benefits, including: Outputs to 126 LPH. Output Pressures to 8.6 Bar; Automated PPM Dosing; Self priming, No Bypass valves required; FLEX-PRO won't vapor lock or lose prime; One button Prime Mode for easy priming and servicing; Brushless Variable Speed Motor; digital touch pad with menu driven software; VGA Graphic backlit LCD displays motor speed, input signal values, service and alarm status; Inputs include: 4-20mA, 0-10Vdc, and Pulse Signal for external speed control, and 30 VDC contact closure for remote start/stop; Patented Tube Failure Detection System (U.S. Patent No.7, 001,153); NEMA 4X IP66.
|
|
Chemical metering pumps -
The 720 IP66 NEMA 4X cased pumps for high-flow processes, suitable for industrial and sanitary applications, flow rates up to 2000 litre/hour are achieved with a single pumphead, rising up to 4000 litre/hour with twin pumphead option.
Continuous tubing from source to delivery or quick fitting elements
3,600:1 control ratio (0.1 to 360rpm speed range)
Display shows pumphead speed or calibrated flow rate
Manual control, flow calibration and MemoDose for single shot dispensing
Maintenance-free brushless DC motor
Dual voltage 100-120/200-240V 50/60Hz power supply range, 350VA
Optional integral leak detector and fluid management
720RX extension pumphead can be fitted to double the flow
Tubing is available in four material choices and five bore sizes.
A Watson-Marlow Value for life pump with five year warranty
|
|
* Aluminum pump housing; 4 5/8" x 5 3/8" x 4 3/16"
* Internal stainless steel components
* Available in fixed speed, mechanical speed control, air drive,Variflow DC, and explosion proof assemblies.
* Positive displacement pump with flow rates of .95 GPM(3.6 LPM)
* Applications: Industrial, Pulp & Paper, Ink, Food, Metering, Solvents, Slurry, Pulp and Paper, and Laboratory
|
|
Peristaltic pump dispensers transfer low viscosity liquids by pressure displacement applied to a turning rotor against a tube carrying material. Usually these pumps are chosen because the liquids are hazardous or difficult to work with and it is advisable to limit operator contact. Another reason is that peristaltic pumps are air free.
Features
• Air-free dispensing
• Snuff-back prevents post-dispense dripping
• Simple load mechanism also provides easy cleaning
• Manual or Timed modes
• Large digital LED display
• Clean room compatible
|
|
Peristalitc Pumps
SAFE AND RELIABLE
■ Polypropylene enclosure extremely shockproof and resistant to chemical aggression.
■ IP 65 protection degree and class 2 electrical insulation (no ground connection required)
USER FRIENDLY
■ Via trimmer settings simple and fast parameters configuration
■ Plugs for protecting settings to avoid undesired tampering
EASY INSTALLATION AND MINIMUM MAINTENANCE
■ Easy wall mounting and removing
■ Plugs on circuit board provide for a quick electrical connection
■ Easy tubing replacements.
|
|
|
|
|
|
KD Scientific is proud to offer our new Pico Pump. It has infusion and
withdrawal capabilities with accurate deliveries of picoliter, nanoliter,
microliter and milliliter flow. It is especially designed to hold microliter
syringes ranging from 0.5ul to 10ml. Applications include cellular injection,
micro flow for drug infusion, capillary liquid chromatography and
micro reaction deliveries.
The KDS Pico pump combines smoother flow and updated features to
create a high performance pump at affordable prices. The Pico has a
bright display and easy to use interface. A new two line 16 character
fluorescent display and 6 membrane keys for ease of use and require
only two entries to start pumping. Select syringe diameter and flow rate.
The flow rate can be changed while the pump is running.
The KDS Pico pump will operate continuously in “rate” mode or accurately
dispense a specific amount of fluid in “volume” mode. The microstepping
pump delivers very smooth and constant flow over the entire
flow range. The Pico pump feature non-volatile memory. The pump
remembers its last syringe size, flow rate and configuration settings. It
meets all the relevant European EMC and Safety requirements for laboratory
use.
KD Scientific also offers a family of syringe pumps to meet all applications.
The full line of KDS pumps include a simple syringe dispense only
pump, a multi-syringe infuse and withdrawal pump, push and pull
pumps, continuous pumps for uninterrupted fluid delivery, nanoliter
pumps, emulsifier, high pressure and custom OEM pumps.
|
|
Small-sized, lightweight and slim. The weight of the SDMP302/306 is approximately 4 g.
･ Supply of microscopic fluid quantities possible.
･ No metal used for parts in contact with fluid.
･ Low noise and low power consumption.
･ Flow rate control by drive voltage or drive frequency possible.
･ Self priming possible.
|
|
For the dosing of liquid chemicals, Alltech Dosieranlagen GmbH has developed the piston diaphragm metering pumps of the FKM series.
These metering pumps meet the highest requirements in operational reliability and accuracy.
Alltech piston diaphragm metering pumps are built in a modular concept. This guarantees high flexibility in combining the pump elements for various areas of applications.
By using different materials and designs for the liquid end, Alltech metering pumps may be used for the dosing of almost all kinds of chemicals.
To find an optimal solution for your dosing tasks, we offer various dosing capacities and pressure ranges.
The integrated pressure relief valve guarantees maximum security.
A wide range of accessories (stroke actuators, pulsation dampers e.g.) completes the range of our production.
|
|
The MultiFertic® dosing pump is a heavy duty, high precision electric or diaphrgam pump for dosing chemicals products and additives. It is made up of one driving module and 1 to 4 injection modules for 25 to 500 L/H (7.5 to 150 GPH).
In order to dose different products (INDEPENDENT INJECTION) or increase the inyection flow, several injection modules can be connected in the same injector. If we do so, we can obtain a higher flow regularity. In the case of 4 modules the injection flow is practically constant.
|
|
|
For corrosive and abrasive media, which have to be dosed against higher pressures than 16 bar piston pumps can be fitted with a piston-diaphragm system. The KMS system combines the advantages of leakage-free diaphragm dosing pumps and precise piston dosing pumps and thus ensures reliable dosing.
|
|
|
|
Dispensing pumps
