|
|
| Products 91 to 120 of 145 |
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Double Ball Check Valves
Pressures up to 10,000 psig (690 bar g)
Flows up to 1,225 gph (4,637 lph)
Meets API Standard 675
|
|
Pulseless series is designed to be almost nothing of any pulsation with high accuracy by special cam and check valves.
Compact design achieved by the cylindrical cam which drives two plungers.
|
|
|
|
|
|
Piston pumps are precise and – compared to diaphragm dosing pumps – almost pressure-independent metering units. The flow rate changes in proportion to the stroke length and can thus be adjusted to very small values. Fields of application are – among others – process engineering and chemical processes, i.e.: wherever the medium must be metered precisely.
The FEDOS E / DX piston dosing pumps from Lutz-Jesco are available at flow rates between 0.17 and 31.5 l/h, with or without microprocessor control. Depending on the size of the pump, maximum pressures between 30 and 200 bar are admissible.
If no control is required for constant metering, the motor is connected directly to the terminal box. In this case, FEDOS E pumps are used. To change the flow rate, either the stroke length can be adjusted mechanically, or the speed of the motor is controlled by means of a separate frequency converter.
FEDOS DX pumps are used if an integration in controls or automatic control systems is requested.
FEDOS DX pumps allow the adaption to a large number of different control systems and system monitoring equipment. The signals required for the external avtivation of the pump can be simple voltage-free closing contacts from water meters or controllers or analog 0(4)...20 mA signals.
|
|
Moyno 1000 Pumps
Economical, high-efficiency Moyno 1000 pumps offer an unparalleled combination of features other positive displacement pumps cannot match.
|
|
|
|
|
|
Salient Features
* Positive displacement, inherently self-priming and capable of handling entrapped gases.
* Inherently non clogging and capable of handling high percentage of solids.
* Continuous pulsation free flow with minimum turbulence and low internal velocity within the pump.
* Doubled sealed articulation joints for longer service life of critical components.
* Temperature range upto 120OC.
* Simple maintenance, sturdy construction, no valves needed which would impede the flow.
* Low NPSH, higher suction with up to 8.4 meter of water column and capable of developing high pressure up to 24 bar even at low pump speed .
* Efficiently handles Non-Newtonian media, slurries and fibrous contents up to 1 million centipoise.
* Capability of variation in flow rate by just changing the pump speed.
* Capability to work on uneven/inclined surfaces.
* Elimination of gearbox.
* Simple construction and high reliability of operation.
* Energy conservation and minimum installation space requirement.
|
|
Beinlich is now supplying a customer with high-precision metering pumps for applying beads of silicon sealant and for bonding housing components together. In two-component systems, the pumps are used for media with viscosities from 5 mPas up to a highly viscous 1,000,000 mPas and reach precisions of over 90 percent at high pressure after just two revolutions. This precision, which even Swiss watchmakers can only dream of, is achieved using the latest Beinlich gear technology.
In the two-component systems, two of these metering pumps ensure the ideal mixture ratio using different volumetric displacements and different speeds for bonding plastic parts, filling with resins, or applying sealing compound.
|
|
|
Kd Scientific New legato 200 Infuse only syringe pump is the is the next generation of syringe pumps. It delivers precise and smooth flow for all research applications. Accomodates 2 syringes 0.5ul to 140ml. User defined flow rates with selectable target volumes or time volumes to control the total infusion volume.
|
|
Isco D-series Pump Models :
Teledyne Isco Series D single-pump systems consist of a controller and pump module. The piston-driven pump module uses a single speed gear train. Nitronic 50 is the standard material for cylinders, pistons, and caps, with Hastelloy and other alloys available for even greater chemical resistance. Standard seals are graphite-impregnated Teflon, providing long life under harsh operating conditions, with optional seals availale for special applications.
The Series D controller offers many different operating modes and features, and we can also customize the software to your specific application on request. The standard operating modes are:
- Constant flow
- Constant pressure
- Flow or pressure programming
- External control
|
|
Moyno Metering Pumps
Precise Moyno Metering Pumps deliver economical, efficient performance for metering liquids under low flow conditions in process applications for industries including chemical processing, pulp and paper, general industrial, wastewater treatment and many others!
|
|
Model Number MCP-50
Dimensions（mm）φ26xH63.5
Maximum Pumping Volume 50μl/cycle
Adjustable Pumping Volume Range 5～50μl
Maximum Operating Frequency 4Hz
Repeated Pumped Volume Accuracy ±1%(15～50μl),±2%(5～15μl)
Port Connection M6 , 1/4-28UNF
Ambient Temp. Range 10 - 40
Fluid Temp. Range 10 - 40
Voltage 12VDC , 24VDC
Power Consumption 4.4W
Duty Cycle Continuous
Insulation Class B
Dielectric Strength AC1500V 60s
Wetted Materials PTFE (POM or PP) , FPM
|
|
Process metering pumps
Process metering pumps are used in all applications where corrosive, toxic and flammable liquids are metered under very high pressures and extreme temperatures. They are e.g. used in the chemical industry, petrochemical industry, refineries as well as oil and gas production or as special metering pumps in the process industry.
|
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
|
|
Description:
* Holds 2 Syringes up to 60 cc* each, can be different sizes
* Infusion rates from 1.459 µL/hr ( 1 cc syringe) to 7635 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"
Won't take up unnecessary space on your laboratory or production bench
* Includes all the advanced functions and programming features of the NE-1000 family
|
|
Features:
- Designed for Quick Disassembly for easy cleaning and sterilizing.
- Conforms to 3A Dairy Standards
- Ceramic, Stainless Steel & Teflon Fluid Path
- Resistant to Chemical & Biological Attack
- No Internal Threads or Blind Holes
- Easily Dismantled for Cleaning & Sterilizing
- Can be used with any Q Drive
|
|
Waukesha Cherry-Burrell's traditional "Can-Do Pump." Versatile in application, its reliability has made it the industry standard worldwide for more than 50 years.
- Easy cleaning and disassembly
- Flexible, three-way mounting
- Field interchangeable single and double "O" ring and mechanical seals
- Exclusive, non-galling Waukesha "88" alloy rotors
- 3-A and BISCC approved
- Maximum pressure: 200 psi (13.8 bar)
- Temperature range: -40° F. (-40° C.) to 300° F. (149° C.)
|
|
CIP self-priming pump adopts acid-resisting stainless steel (AISI 316) in valve body, which has unique acid and alkali resistance, and comply with sanitary requirements for foods.
As a positive displacement pump, its features are superior to centrifugal pump since it suction liquid mixed with air or foams and even merely air. It is widely used to suction material with liquid level below the pump, For instance in the milking room, it suctions milk from the milk barrel. It can also be used in automatic CIP cleaning system as return flow pump in cleaning tank. The mechanical sealing is the build-in influx type, and the temperature of suctioned materiaI is no higher than 100℃.
|
|
MAGDOS LT is a solenoid-driven diaphragm pump with a state of the art microprocessor-controlled electronic.
The electronic provides power to the pump drive depending on the system´s pressure requirements thus reducing power consumption, noise level and heat generation. Due to the reduced heat generation MAGDOS LT operates at ambient temperatures of up to 45°C (113°F) depending on the chemical resistance of the wetted end material.
This dosing pump is available for a capacity range of up to 6 l/h and a maximum pressure of 6 to 16 bar. A flexible pressure adjustment is possible.
Double-ball check valves ensure high accuracy even at smallest flow rates.
MAGDOS LT solenoid-driven dosing pumps are especially suitable for water treatment and applications in the process industry. Due to the hermetically sealed design they are suitable for toxic and aggressive media.
|
|
The delta® pump is the first pump worldwide with controlled solenoid drive. The suction and pressure strokes are fully monitored and can be adapted to the individual application. The delta pump is equipped for almost any application thanks to numerous drive options as well as the connection via Profibus® or CANbus to the central control station. The pump is equipped with the option “Process Timer" and thus can be used as control centre in cases where otherwise programmable logic controllers would be required.
Advantages
* Flexible adaptation to the metering task ensuring optimal metering accuracy
* The integrated injection control optoGuard® detects hydraulic failures which can then be messaged via the optional relays
* High level of economy thanks to savings with regard to accessories such as e.g. pulsation dampeners, flow monitoring etc.
* High metering accuracy even at varying backpressure
|
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
|
|
Kloehn Ltd. syringe pumps are known throughout the industry for their performance and quality. No other family of pumps offers the designer/user as many capabilities and so much flexibility at a great value. Kloehn Ltd. pumps offer the highest resolution and syringe driving forces, giving users the ability to work with the largest syringe range possible. Add the versatility to choose many different valve options, including the newest ceramic face valve, and you have a pump/valve module that is ready to work for virtually every application requiring precision fluid metering.
Features include:
- Standard 24,000:1 or 48,000:1 resolution
- Syringe sizes from 25ul through 50ml
- Valves; 3,4,5,6 & 8-way configuration in both Distribution and Non-Distribution form
- Stepper motor driven precision ball screw coupled with ball nut.
|
|
Description:
* Holds 1 Syringe up to 60 cc*
* Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"
Won't take up unnecessary space on your laboratory or production bench
* Includes all the advanced functions and programming features of the NE-1000 family
|
|
Gradient Pumping Features:
* Smooth linear increasing or decreasing gradient
* Set the starting rate, ending rate, and the time
* Pre-program multiple gradients plus any other NE-1000 programming feature
Description:
* Holds 1 Syringe up to 60 cc
* Infusion rates from 0.73 µL/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"
Won't take up unnecessary space on your laboratory or production bench
* Includes all the advanced functions and programming features of the NE-1000 family
|
|
The neMESYS syringe pumps are ideal for generation of extremely smooth and pulsation free fluid streams in the range of millilitres or even nanolitres per second. They are also perfectly suitable for high precise dosage of micro volumes in the range of nanolitres.
The PID controlled drive unit of these syringe pumps ensures an extremely smooth movement of the syringe piston and prevents stick-slip-effects of the piston inside of the syringe tube. This guarantees a very high precision and the absence of pulsation in the generated fluid streams.
The universal syringe holder offers an outstanding flexibility in choice of the proper syringe for your application. Now the selection of the right syringe only depends on your application and not on any syringe manufacturer. Single syringe pumps can be equipped with 3-way-valves optionally. This allows take-up of reagent and delivery without drawing the syringe from the holder or changing the tubes.
|
|
Highest precision up to 195 bar
The neMESYS mid pressure syringe pumps are made for the precise injection of fluids into systems with higher pressures or for working with viscous fluids. They bring the approved high precision neMESYS dosing technology into pressure
ranges of up to 195 bar.
Technology
By simple assembling of single neMESYS mid pressure syringe pumps (click system) or by linking them via bus cable you can build up a high-performance multi-channel dosing system. The powerful, highly precise and PID controlled drive unit of this mid pressure pump ensures an extremely smooth movement of the syringe piston. This enables the pulsation free generation of precise fluid streams in the range of nanolitres and the dosage of micro volumes.
|
|
The neMESYS high pressure syringe pumps are made for the precise injection of fluids into high pressure systems or for working with viscous fluids. They bring the approved high precision neMESYS dosing technology into pressure ranges up to 250 bar.
The powerful, highly precise and PID controlled drive unit of this high pressure pump ensures an extremely smooth movement of the syringe piston. This enables the pulsation free generation of precise fluid streams in the range of nanolitres (depends on syringe size) and the dosage of micro volumes. By using rugged stainless steel syringes the force of the drive unit can be converted into pressures up to 250 bar.
The integrated pressure sensor (measurement range 0 - 250 bar) enables continuous monitoring of the actual pressure and may help to increase the safety of your high-pressure applications.
|
|
FMI's V300 is a variable stroke rate metering pump system that drives FMI pumps from 5% to 100% of their rated flow with 0.1% adjustability. Typical speed rates for the direct drive system are 90 to 1800 strokes per minute. The system repeatability is 1%.
Features:
- Membrane Switches for manual Flow Rate Settings and Start / Stop functions
- 3 1/2 Digit LCD Flow Display
- Selectable 4-20 mA, 0-5 VDC, & 0-10 VDC input for communication with process instrumentation
- Start, Stop & Reverse Flow while maintaining flow settings
- Universal Power Input accepts 100-240 VAC 50/60 Hz
- Rugged, anodized aluminum enclosure designed for both bench-top & wall mounting
|
|
| ... products without technical information |
| |
|
|
Dispensing pumps
