|
|
MCP-50
Maximum pumping volume : 50 micro liters/shot
Adjustable pumping volume limits : 5 - 50 micro liters
MLP-200P
Maximum pumping volume : 200 micro liters/shot
Adjustable pumping volume limits : 10 - 200 micro liters
NRP-500P
Maximum pumping volume : 500 micro liters/shot
Adjustable pumping volume limits : 50 - 500 micro liters
PKP-500P
Maximum pumping volume : 500 micro liters/shot
Adjustable pumping volume limits : 50 - 500 micro liters
|
|
|
GPD and SPD Pneumatic Pumps provide a compact, variable speed, air powered drive for Q and RH pumps. Compressed air has proven to be an ideal power alternative when an electrical hook up is not readily available. Stroke rate is easily varied by regulating the air flow to the drive.
|
|
|
|
|
|
Stroke Adjuster is made more compact and adjustment is simplified with an internally threaded design. The positive locking device to hold stroke length is readily accessible and easy to operate.
The Pneumatic Piston and Fluid Plunger Assembly is guided at both ends on TFE composite bearings ensuring concentric movement of the plunger though the seals.
The clearance between the return spring and plunger has been optimized to eliminate any possible contact.
A true double sealing arrangement is used so that secondary seal containment is provided.
Lubrication has been simplified with the use of synthetic grease. The lubrication chamber is filled once over the life of the seals.
The bleeder is equipped with a barbed fitting for plastic tubing so that the fluid bled from the fluid chamber can be collected.
Both the discharge and suction check valves have tough TFE composite seats for long life and positive sealing.
Threaded port after the secondary seal provides for the indication, collection or containment of any seal leakage.
|
|
|
Maintaining the same size footprint of previous models, the sleek new pump offers a number of product enhancements to provide longer life and product convenience, while the physical design signifies supreme quality. The newly redesigned housing improves the drives heat transfer properties, as it generates heat farther away from the electronic components to maintain the long-term integrity of the PC Board. Electrical connector attachments have been repositioned to the front of the pump for easy access. With a new clear cover the face of the pump is shielded from exposure to corrosive substances yet lifts easily for convenient access, allowing operators to view dial settings for fine-tuning output. In addition, the pump and liquid end mounting geometries have been improved for enhanced connections. For more information please contact LMI Milton Roy
|
|
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. The mechanically actuated diaphragm reduces the possibility of hydraulic oil contamination of process liquid which makes this an ideal pump for water treatment applications. DC variable speed drives are available for external control and automation.
The SD & SG metering pumps offer a high level of reliability with outstanding value for applications up to 175 psi (12 Bar).
|
|
|
|
|
|
High discharge accuracy
The main components such as the plunger and cylinder are processed with high precision of micron order, so it is possible to obtain high discharge accuracy. (Discharge accuracy : }0.5%) By changing the angle of the pump head it is possible to freely adjust the discharge amount between 0 and maximum discharge.
Excellent corrosion resistance
Materials such as silicon carbide (SiC), fluorocarbon polymers (PTFE) and stainless casting (SCS14) with excellent resistance to corrosion are used for parts that come in contact with the fluid. This makes it possible to use the pumps for handling a wide range of chemicals.
Dispense into a vacuum condition and removal from a high-pressure condition
Since there are no suction and discharge valves, it is possible to directly dispense a constant amount of fluid in a vacuum (negative pressure) without using a solenoid. Constant-volume dispensing is also possible if suction side is pressurized.
Capable of handling slurries and highly viscous fluids
The unique valveless construction and the excellent resistance to wear of SiC, it is possible to handle slurries with fast precipitation speed as well as abrasive slurries. Also, the pumps are capable of smoothly pumping highly viscous fluids up to a maximum viscosity of 20,000 mPas.
Note: The discharge accuracy drops for viscous fluids with a viscosity of 500 mPas or greater. Contact this company for details.
|
|
|
|
|
|
The FEM diaphragm dosing pump has been specially developed
in order to accurately dose small quantities of liquid over a long
period of time whereby two of its most distinctive features are its
compact size and robustness (pump and electronics). The FEM
pump and electronics makes a complete dosing system which
is suitable for both simple as well as complex applications. With
the functions quasi continuous flow and batch dispensing the
FEM diaphragm pump differentiates itself from pumps based on
alternative technologies eg. piston, gear, syringe and peristaltic
pumps. Other interesting features are its high reliability, a
favourable purchasing price and low maintenance costs.
KNF has developed a specially programmed electronic control
module so that the integrated solenoid valve and the movements
of the diaphragm are exactly synchronised. This results in an
exact dosing which is gentle and low in pulsation. In addition
to these unique pump characteristics the control module also
allows a wide range of control possibilities to be used eg.
serial interfaces.
The dosing pump is self priming, maintenance free and can
be run dry
|
|
Model 88 Gemini Series
More Than Two Pumps in One
KD Scientific offers the NEW Gemini 88. This unique pump is really two
pumps in one. Each side of the Gemini 88 has its own syringe rack,
motor and leadscrew. The pump can infuse simultaneously at different
rates, or infuse with one syringe and withdraw with the other. When
combined with a valve box it provides continuous delivery.
The KDS GEMINI SERIES Syringe Pump offers continuous infusion or
withdrawal, 24 hours a day, 365 days a year with the accuracy and
low flow of a KD Scientific syringe pump.
The KDS GEMINI SERIES Pump is a breakthrough in pumping technology.
The KDS Model 88 has two independent pumping channels linked
through hardware and software. When combined with a valve box, it
provides the continuous delivery of a peristaltic or piston pump with the
accuracy, absence of pulsation and low flow rates of a syringe pump.
|
|
Description:
* Holds 2 syringes up to 60 cc
* Continuous infusion mode allows one pump to infuse as other withdraws
* Dual pump mode allows for simultaneous operation with one pump mirroring the second pump
* Infusion rates from 0.73 L/hr ( 1 cc syringe) to 2100 ml/hr (60 cc syringe)
* Easy-to-use keypad interface
* Includes all the advanced functions and programming features of the NE-1000 family
* Pictured Syringe is for Demonstration purposes only
|
|
# Holds small or big syringes up to 60 mL
# Pump continuously until you stop the pump
# Infusion rate can be changed while pumping
# Remembers previous settings on power up
# Power failure mode allows pump to continue pumping after a reset
# Syringe purge mode
# Displays total volume dispensed in mL or L units
# Maximum pumping rate of 1500 mL/hr with a 60 mL syringe
# Precise reproducible flow rates
# Selectable infusion rates units: mL/hr, L/hr, mL/min, L/min
# Pictured Syringe is for Demonstration purposes only
|
|
High Volume
CHEM-PRO C2 features: PVDF Pump Head, Adapters and double ball valves; digital LCD touch pad control; variable speed motor adjustable from 1 - 100% in 1% increments, smooth operation no hammering; priming/de-gassing valve aids priming under pressure and removing gas from system; powder coated aluminum housing, NEMA 4X / lp66 rated enclosure; Full stroke every time avoids vapor lock; DFD built-in Leak Detection System senses diaphragm failure and shuts off pump.
CHEM-PROTM C2 can be ordered with low flow diaphragm for output to 97 LPH. The high flow diaphragm has maximum 142.7 LPH output, both have 10.3 bar maximum working pressure.
|
|
Compact and Economical
CHEM-FEED Metering Pumps are suitable for a variety of water and wastewater treatment applications. CHEM-FEED pumps feature Blue-White's exclusive Heavy Duty Pump Head with, double ball inlet and outlet cartridge type ceramic check valves, constructed of tough PVDF. Each valve has two ceramic checks, and is double sealed with Viton and TFE/P o-rings. The double ball valve design provides enhanced priming, and is exceptional for purging air and gas. Several models are offered in a wide range of output capabilities, voltage options and material variations. In addition, CHEM-FEED pumps can be customized for volume purchasers with purchase order contracts.
|
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control
|
|
|
These pumps with mechanically actuated dual diaphragms bring the advantages and security of the diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price.
|
|
The DOSTEC dosing pumps are heavy duty, high precision diaphragm pumps for dosing liquid products.
These pumps are capable of injecting different flows depending on the head being chosen. The available heads goes from 2.5 to 1000 L/H (0.6-264 GPH). It feature a flow regulator knob that allows the dosing flow adjustment between 0% and 100%, while the pump is running.
|
|
|
|
|
|
PP Series Diaphragm Metering Pump Systems
Pre-plumbed and wired for fast installation and trouble-free setup. Available with pumps shown below.
Series AA, B & C Diaphragm Chemical Metering Pumps
Series AA, B & C Chemical Metering Pumps have been an industry standard for over 20 years. The familiar yellow and black pumps have a rugged, totally enclosed, chemically resistant housing for protection in the harshest environments. Flow rates to 25.0 GPH and pressures up to 300 psi.
Series E7 Explosion Proof Electronic Metering Pumps
The Series E Metering Pump is designed for use in hazardous environments. It meets or exceeds all standards for Class I, Division I, Groups C and D; Class II, Division I, Groups E, F and G. The stroke speed may be controlled manually or externally by a digital input or a milliamp input with the use of an A to D converter. Flow rates to 20.0 GPH and pressures to 300 psi.
Series G Motor-Driven Metering Pumps
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. An ideal pump for water treatment applications. DC variable speed drives are available for external control and automation. Flow rates to 310 GPH and pressures to 150 psi.
Series H9 High Pressure Electronic Metering Pumps
The Series H9 Metering Pump is designed for very low output injection into high pressure systems. Type 9 control is standard with the stroke speed manually controlled or externally controlled by a digital or milliamp input. Flow rates to 0.14 GPH and pressures to 1000 psi.
|
|
In a class by itself - the LK is a motor driven, mechanically actuated diaphragm metering pump with a maximum capacity of 114 GPH (432 l/h) and maximum pressure of 225 PSI (1.5 MPa).
This expanded flow range makes the LK a perfect compliment to the E-Class Metering Pump Line.
The LK Series is ideal for chemical feed applications in a wide range of fields, including water treatment, chemical process, agriculture, mining and paper.
|
|
Our new SELF SERVICE diesel fuel dispensers have been designed on the basis of in-depth studies of users' requirements.
Here is what users are looking for:
- Sturdy make and attractive design. The dispenser should be solid, but that doesn't mean it has to be unsightly.
- Fast refuelling.
- Accuracy and reliability. The on-board flow-meter must be precise and consistent over time.
- Must allow data management and select authorized users.
- Must be connectible to a PC for exporting data files and capable of running programmes that keep track of all refuellings performed.
- On-board printer for issuing receipts.
- Level-gauge showing current tank levels.
- Filter for separating any water contained in the diesel fuel.
- Competitive prices.
In reply to these needs we have produced a complete range of newly-designed fuel dispensers. Modern and attractive, they are compact and sturdy, and thanks to a lockable front door on hinges, the internal organs can be easily accessed for maintenance.
|
|
DME Digital Dosing
DME up to 48 l/h
with stepping motor technology
0.0025 to 48 l/h
Smooth and constant dosing
The innovative technology of the DME range ensures smooth and constant dosing at any time. Simply set the dosing capacity at the user-friendly display, the pump will do the rest. The simple multilingual menu gives access to many standard control functions such as pulse, timer, batch and anti-cavitation control.
Applications:
Precise dosing of chemicals
water and waste water treatment
cleaning installations
swimming pool water
process plants
pulp and paper
textile industry
Features and benefits:
Precise capacity setting in millilitres or litres
Operation panel with plain-text display at the side or at the back
Key lock
0/4-20 mA control
Pulse-/timer-based batch control
Anti-cavitation function
Easy calibration function
Field bus communication module (option)
|
|
|
|
|
|
The EK Series pumps are the world's first IP67 electronic metering pumps. This means that the EK is the only pump in the industry guaranteed to operate submerged 3 feet under water for up to 30 minutes!
Needless to say, the EK Series pumps are ideal for wet or high humidity environments such as irrigation, agriculture, car wash or paper mill applications. Capacity ratings are up to 6.7 GPH with a maximum pressure of 150 PSI.
IP67 Construction
By integrating the pump body into a one-piece design, sealing is easier and more effective. Both the drive and the controller are completely insulated from moisture or gas. Construction of the EK Series pumps make them perfect for indoor or outdoor applications where the pumps are frequently exposed to wash down.
Control Features
High speed and a 20% minimum stroke length allow the EK Series to achieve an 1800:1 turndown ratio. The digital display and pushbutton speed control make setting the EK pump easy and precise. The EK pumps come equipped with pulse input (1:1) control and also feature an external stop input that can be set to stop the pump from a normally open or normally closed contact.
|
|
The Series DOSITEC dosing pumps are heavy duty, high precission, electric diaphragm pumps for dosing liquid products.
These metering pump are capable of injecting flows from 0 to 2.80 GPH and work at maximum pressures of 145 PSI. It also allows connecting a level switch.
DOSITEC SERIES:
DOSITEC-MP: Adjustable manually, between 0-100%, through a potentiometer.
DOSITEC-MD: Adjustable manually, between 0-100% through a keyboard.
DOSITEC-Q: Adjustable proportionally through a digital signal (pulses).
DOSITEC-mA: Adjustable analogically through a 4/20mA signal.
DOSITEC-PRC: PH-ORP (Redox) control through a on/off relay.
|
|
LMI pumps
Electromagnetic pumps with corrosion-resistant plastic housing and mechanically actuated diaphragm or plunger liquid end pumps: accurate and automated pumps in the largest versatile range on the market today.
- Flow rates up to 76 l/h and pressure up to 135 bar:
* Versatile programmable models,
* Pumps with separately adjustable stroke lengths and rates,
* Micro-processor controlled functions,
* Proportional dosing,
* High-viscosity dosing pumps (HV),
* Compact, light and economic.
- Precision dosing even at flow rates of 0 to 10 l/h
LMI's electronically actuated pumps are light, reliable and suit a broad range of applications.
|
|
|
|
|
|
Dosing systems for the water treatment includes solenoid metering pumps, motor driven mechanical pumps, measure and control instruments and a wide range of accessories. Our long experience has led us to develop specific products for the differrent applications on the various markets of which both SEKO and its customers have been leaders for years.
The design of metering units with tanks, stirrers, metering pumps and theiraccessories, together with systems for the automatic polyelectrolite preparationcomplete the range of products based increasingly on an approach oriented on Custumers needs.
Electronic Dosing Systems
The high frequency oft he dosing pulses and the great chemical compatibility of the components make these pumps extremely precise and versatile products.Thanks to their microprocessor-based electronics, they adapte easily to any dosing requirement.
Motor Driven Pumps
The new range of our motor driven pumps features a high level of reliability and accuracy.Tough and plain, they guarantee excellent quality in time.
|
|
* Process magnetic drive pumps MDE series
The most reliable, large-sized magnetic drive pump designed for process use
Max. discharge capacity: 4.0 m3/min
Max. head: 55/79 m
Main materials: ETFE, PFA
* Process magnetic drive pumps MDM series
Magnetic drive processing pump with dry running capability
Max. discharge capacity: 1.4 m3/min
Max. head: 70/102 m
Main materials: CRETFE, PFA
* Process magnetic drive pumps MXM series
Magnetic drive pumps with an excellent balance of features and performance
Max. discharge capacity: 600 L/min
Max. head: 29/42 m
Main materials: CFRETFE
|
|
|
|
|
|
In a class by itself - the LK is a motor driven, mechanically actuated diaphragm metering pump with a maximum capacity of 114 GPH (432 l/h) and maximum pressure of 225 PSI (1.5 MPa).
The LK Series is ideal for chemical feed applications in a wide range of fields, including water treatment, chemical process, agriculture, mining and paper.
Stroke Adjustment
Accurate and reliable stroke setting is accomplished with a micrometer dial of the spring back stroke adjustment mechanism. This lockable mechanism is adjustable from 10 to 100%.
Drive
The heart of the LK is the dual-cam drive with a built-in worm gear type speed reducer. This compact & rigid mechanism, provides maximum wear resistance in continuous operation over long periods of time.
Motors
All of the standard models employ totally enclosed fan-cooled motors which are
vertically mounted to save space. A variety of motor options are available, including explosion- proof, and DC variable speed motors for external control by a 4-20 mA input signal.
|
|
High speed operation
Up to 360 strokes per minute results in high resolution chemical feed, elimination of slug-feed effects.
Compact size
Ideal for OEM specifications, ES pumps are small, quiet, and lightweight.
Double ball check valves
The ball, seat and guide assembly ensures a tight seal to prevent loss of prime.
Long lasting diaphragm
PTFE laminate over EPDM is molded onto a solid core. A retainer plate is provided to minimize flow rate changes as pressure varies.
|
|
The Electro Osmotic Pump is of small size but high
pressure performance. It has no mechanical moving parts and so it does not
produce any noise or pulsation in the liquid when operating. It is self
priming and orientation-free. It can be powered by battery or DC power
supply.@It is suitable for applications such as uTAS, Lab-on-a-chip,
dispensing, diagnostics, micro-fuel cells, micro-electronics and
drug-delivery.
It can directly pump de-ionized water methanol and ethanol. Other fluids can
be pumped by indirect pumping. Complete solutions and working systems
incorporating this pump are also provided.
|
|
The DA35 Autocan pump extrudes high viscosity material under pressure directly from a pre-filled can. Suitable for automatic and semi-automatic controlled dispensing applications which require a constant supply of air-free material.
DA35 features
• Material delivered air-free
• Low noise air pump
• Electrical sensing
• Simple load mechanism also provides easy cleaning
• Teflon, Viton and PEEK seals for wetted parts
• No need to transfer material which avoids waste
• Easy hook up to automatic systems
|
|
The GHC Series of iron, steel and stainless steel pumps is designed for continuous duty service for applications in the operating ranges shown. These units are available with head jackets for temperature control, carbon graphite bushings for low-viscosity liquids, silicon carbide bushings for wear resistance, and numerous seal options. The GHC Series units may be foot-mounted or, by using a motor adapter, direct connected to NEMA "C" flange motors. This heavy-duty series provides superior rotor shaft support and an integral, maintenance-free radial/thrust bearing for reduced deflection and wear.
Specifications
Size: 1" (25 mm), 1-1/2" (37.5 mm), 2" (50 mm), 2-1/2" (62.5 mm), 3" (75 mm)
Max Capacity: 107 GPM (7 lps)
Max Viscosity: 250,000 SSU (54,000 cST)
Max Pressure: 300 PSI (21 BAR)
Min Temperature: -60 F (-51 C)
Max Temperature: 350 F (177 C)
Materials of Construction: Cast Iron, Cast Steel, Stainless Steel
|
|
The QDX High Flow Hazardous Duty pump is designed for use in commercial, industrial, and laboratory hazardous applications. Accommodates flows up to 2200 ml/min. The QDX utilizes the FMI Adapter Kit P56C and a Class I, Group D, Class II, Groups E, F, and G, NEMA frame 56 face-mount motor.
The QSYX Low Flow Hazardous pump is coupled to Class I, Group D, synchronous motor for the ultimate stroke to stroke accuracy. Accommodates flows up to 92 ml/mim.
|
|
|
|
Dispensing pumps
