|
|
The Production RSP Machine will produce a 7 inch by 7 inch by 4 inch insert in two hours
RSP (Rapid Solidification Process) Tooling uses a system that is able to spray molten steel onto a ceramic negative. While the steel is spraying the ceramic negative must spin and change angle in order to create an even distribution.
Once the spray is complete, a 30lb-40lb steel deposit is left on the ceramic which must be left alone for aproximatly 90 minutes to cool. After that period has passed, the below image is what is left over.
This newly formed pattern will now be sent to the machine shop where it can be cut to fit its designed application.
|
|
Flexible Packaging
These machines are designed to produce DOYPACK® pouches at high-speed, up to 250 pouches/minute, or four-seal bags.
THIMONNIER's Research and Development Department is able to create new forms of packaging.
Special adaptations enable the manufacture of shaped bags for unique packaging solutions.
THIMONNIER bag manufacturing machines have been installed at the major transformers in Europe, the Middle East, Asia and Central America.
THIMONNIER also offers an automatic machine for installing spouts and stoppers on bags and Doypack® pouches (SI 30).
|
|
RS 26
New range of bag making machines RS15, RS25, RS26 for the manufacturing of flat and satchel glued paper bags, envelope bags, bags with window, long bags, waxed bags.
|
|
|
An Extra-lightweight machine to join most fabrics wet or dry with a chain stitch seam. The join enables continuous processing to be carried out. Quick release seam. Use in confined spaces. This machine can be used as a bag closing machine.
|
|
Technology for the Feedstuff Industry
AMANDUS KAHL HAMBURG was founded in 1876 and today looks back on more than 125 years of machine and plant construction. In 1920, the first
pelleting press designed as a worm extruder was supplied. Since 1948 the manufacturing programme has been continuously extended.
The delivery programme:
Process technology, engineering, machines, plants, turn-key feedmills, worldwide subsidiaries and agencies as well as after-sales service.
Plants:
Turn-key feed factories and plants for compound feed, shrimp and fish feed, petfood, premix/concentrate, roughage, straw, green forage,
dried beet pulp, wood and biomass.
Machines:
Proportioning and weighing equipment, mixers, hammer mills, liquid proportioning units, continuous mixers, conditioners, hydrothermal
reactors, sterilizers, annular gap expanders, extruders, pelleting presses, driers/coolers, crumblers, Rotospray@, control and process
visualisation systems.
|
|
Photovoltaic-TPS®
Reliable Moisture Protection for Thin film Modules
The flexible TPS® adhesive and sealant has proven itself millions of times
over in the manufacturing of insulating glass and has been in use worldwide for more than ten years. Because of its unique material properties, TPS® is also outstandingly suitable as a supplementary component for all thin layer modules – independent of whether or not module encapsulation takes place with TPS® or in the conventional way.
TPS® Minimum Applications
The Bystronic glass machinery technology facilitates the application of TPS® in layers less than one millimetre thick. Comparable minimum applications have been in use for many years, e.g. in the production of fire and sound protection windows. This process is especially suitable
for sealing moisture-sensitive thin layer modules on a Cis and CaTe basis
|
|
|
|
|
|
General description:
The ILS 700 laser system is a dedicated tool for use in photovoltaic laser applications as the processing of mono-crystalline and poly-crystalline silicon solar cells.
Examples for processing techniques are: laser edge isolation, LFC processes (laser fired contacts), micro via hole drilling, SiN-ablation / SiO2-ablation, downsizing, surface modification, laser scribing and surface structuring.
This gantry type machine allows the processing of different wafer formats by software program selection. Wafer sizes range from 100 x100 mm to 210 x 210 mm. There is no difference in process performance as the wafers increase in size. The automatic laser treatment of pseudo square formats is possible.
The machine can be supplied with full scale automation in various configurations as well as being in-line integrated in fully automatic manufacturing lines.
The system offers the possibility to integrate up to two laser sources in one machine for processing two wafers simultaneously or for subsequent processing with different laser sources / wave lengths. This guarantees flexibility and a very high troughput of up to 2000 wafer per hour, depending on application.
|
|
Optomec's industry-leading LENS systems are used to cost-effectively fabricate, enhance, and repair high-performance metal components in state-of-the-art materials such as titanium, stainless steel, and Inconel®.
The LENS system uses the energy from a high-power laser to build up structures one layer at a time directly from powdered metals. The resulting fully functional 3-dimensional components have mechanical properties that are equivalent or superior to forged materials.
LENS solutions can be used throughout the entire product lifecycle for applications ranging from Materials Research to Functional Prototyping to Volume Manufacturing. An additional benefit is its unique ability to add material to existing components for Service and Repair applications.
|
|
RSP (Rapid Solidification Process) Tooling uses a system that is able to spray molten steel onto a ceramic negative. While the steel is spraying the ceramic negative must spin and change angle in order to create an even distribution.
Once the spray is complete, a 30lb-40lb steel deposit is left on the ceramic which must be left alone for aproximatly 90 minutes to cool. After that period has passed, the below image is what is left over.
This newly formed pattern will now be sent to the machine shop where it can be cut to fit its designed application.
|
|
The Contexo Rotary Indexing System is offering you an approved method that provides a wide variety of solutions.
The principle:
A mechanical rotary table serves as the systems´ base unit. Pick & Place-units are driven by main cam. Our core competence lies in 6-, 8-, 12-, 16- and 24-fold dial systems, available in 1 to 4-track versions. Working at a performance of 60 cycles/min., this results in an output of 240 parts per minute. Along with its compact design, Contexo Rotary Indexing System’s other strength is its simple but solid high-output-performance.
* Line production for an annual output quantity of up to 4 millions
* End-to-end-automation of your production at a fair price
* Up to 8 parts and processes, and / or fully automated production
* For overall 1 to 3 products or product variants (with little changeover time)
|
|
Pfiffner RT
12-station rotary indexing center for uncompromising 6-sided cutting of complex cubic and rotationally symmetrical workpieces
* with a maximum of 12 machining stations horizontally and 6 vertically
* Main spindle with 12 clamping devices
* Workpieces from bar stock Ø 60 mm x 100 mm long
* Workpiece blanks 100x100x100 mm
* 12-station turning and machining center
* complete 6-sided machining with reclamping
|
|
Sewing lines for grey cloth.
Main operation:
Machine suitable for sewing small pieces coming from balls or small rolls, with general checking operation, measuring and rolling on big rolls or folding on perfectly squared pallet.
|
|
Turn-key solutions - Solartechnology
MiniTec offers automatic assemblylines for this very sophisticated process including industrial images processing, automatic test stations, framing stations and many approved solutions for damage free module handling.
|
|
Increased focus on safety measures, energy-saving programs, and changing requirements profiles mean continual growth in the demand for special glass products. For this reason, Bystronic Armatec's laminated glass lines are designed to accommodate customer-specific requirements.
These requirements profiles form the basis on which tailor-made solutions will be conceived, so that future production will be efficient, durable and trouble-free.
|
|
The Flexlam® range of solutions & products concerns the Automotive and Architectural Glass Industries. Simtech designs & manufactures complete solutions to laminate glass on customers' specifications.
The range comprises: indutrial ovens, trolleys, vacuum rubber bags, vacuum pumps, hoses & connections.
|
|
Bystronic glass offers complete, individually developed turnkey system solutions for the efficient fabrication of automotive glass.
The tailor-made production lines are consistently designed for the customer’s individual needs and permit extremely high productivity and optimal system availability.
|
|
For decades, Bystronic Lenhardt insulating glass production lines have achieved success due to their outstanding quality, economy and innovative technologies.
The comprehensive product range offers tailor-made solutions, which provide optimum support for the entire insulating glass manufacturing process.
* TPS (Thermo Plastic Spacer) "warm edge"
I.G. lines
* SuperSpacer production lines
* I.G. lines for conventional, metallic spacers
* Components for I.G. manufacturing process
|
|
The SCV System proposes a series of machineries for doubleglass production.
The series of the lines for insulating glass introduced in various heights is vast passing from the semiautomatic lines (with roller press) up to the automatic lines (with panel press) able these last to produce structural glass. SCV System also introduces besides numerous machineries as accessories: butyl extruder, profile cutting machine, desiccant filling machine, hot melt extruder, two component extruders (hydraulic or pneumatic), one component extruder, silicone extruder, freezer, rotating table, gas filler machine.
The constructions of all the machineries is done with the maximum care employing the most suitable and sure materials.
|
|
Robust and Automatic Twisting machine MT 500A
The MT 500A twisting machine is designed for the manufacture of iron decorative pieces, bars, railings, columns and many more items for the artistic locksmith trade.
The machine's traction is carried out using a reduction engine with flat pinions soaked in oil Ed 85 W 140.
It has two working positions; one for twisting and other without any neck limitations for producing any kind of columns, hooks, chains, balusters, etc.
CONTROL PANEL
The MT 500 A twisting machine is equipped with a programmer for producing pieces inline, in which the starting and finishing points can be programmed.
Memory capacity of 8 different twists. Piece counter. Tactile keyboard. Digital screen.
|
|
Electronically programmable machines for high speed production of scrolls and twists with flat and square section steel bar stock.
Four processing modules are possible: scrolling unit, twisting unit, horizontal press, and tube bender.
These machines are workcentres for the ornamental wrought iron sector.
Typical applications: ornamental work for the construction of gates, railings, doors, and security bars.
|
|
Electric, oil or water heating
Press area: 2,200 x 1,100 mm
2,200 x 1,250 mm
2,500 x 1,300 mm
2,750 x 1,300 mm
3,000 x 1,300 mm
Total pressure: 500 kN (50 tons) up to 1600 KN (160 tons)
|
|
Exhaust waste gas must sometimes be treated before release to the atmosphere. Thermal oxidation at high temperature is the best solution to treat large volumes of pollutants, VOC or odours, contained in gaseous effluents, aerosol or liquid. The organic pollutants are thus oxidized into inert compounds.
The rules and regulations in the various European Community countries encourage industry to seek satisfactory and economic solutions. The range of BABCOCK WANSON gas effluent oxidisers respond precisely to these directives in many spheres of activity, with both traditional and innovative solutions.
BABCOCK WANSON designs and installs three important types of incinerators :
- recuperative and integrated recuperative oxidisers ;
- regenerative oxidisers ;
- odour and mist oxidisers.
|
|
| ... products without technical information |
| |
|
|
Other manufacturing machines 
