|
|
Pressure range up to 1250 bar / 18,000 psi
Suitable for Air, Nitrogen, Argon, Helium and a wide range of other gases
Provided with Resato air-driven single acting, double acting or two-stage gas booster
Water-cooled Oxygen boosters available
All stainless steel construction
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
Pressure range up to 3650 bar / 50,000 psi
Flow up to 50 L/min
Suitable for water, oil, and a wide range of chemicals
Provided with reliable Resato air-driven pump
Low noise level even at high cycling speed
All stainless steel construction
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
|
These standard systems are made of stainless steel and have a working pressure up to 2400 bar and a flow capacity from 0 to 37 ltr/min. They are compact, easy to handle and ready for use. These systems are often used for pressurising vessles, tubes, fittings, fire extinguishers, hoses and valves.
|
|
Resato has designed a robust power pack, containing a build in pump with 320 mm air drive section.
Thie biggest benefit of this unit is the high flow combined with high pressureoutput, by use of only one pump. Simple construction leads to easy and low maintenace.
This mult-purpose unit is suitable for:
- Pressure testing of large objects.
- Chemical Injection.
- Generating hydraulic power.
|
|
Aerospace OEMs and their suppliers require quality air flow measurements of passages in both aircraft and land-based turbine engine components. Each OEM has a unique testing specification and their suppliers must be flexible with the test procedures in order to comply. Accuracy, repeatability, throughput, and availability are critical elements in the design of the Test System. As a “standard” product, these test stands are constantly undergoing system-wide improvements.
|
|
|
For over 20 years and produces Elabo develops testing facilities. Whether safety and functional test, permanent run and endurance test or the examination of load limits: By the experience of many years and the know-how within the ranges measuring and inspection technique, mechanics, control, data adminstration and documentation can be realized properly matching engineering solutions. As one of the few manufacturers the connection diagrams do not only develop with us, but we manufacture the test act ions or test plants in Crailsheim themselves, for example the complete adaptation and contacting technology. Within the range of electrical security we guarantee the adherence to of valid standards and regulations, for example after VDE or UL.
|
|
|
With its Centor Dual force gauge, fixed plate and adjustable plate, this unit can be used to test high capacity tension and compression springs. The command automatically determines the origin of the displacements and then stops the machine at a predetermined flexion value to measure the height under load. It is also possible to measure flexion, and cycles can be programmed. The instrument has an RS232 to store the results on a computer. Additional sensors are available to provide high levels of precision for springs with low force levels. Ready to use system. Supplied with a Ø 4 in fixed plate.
|
|
|
It is a universal testing machine capable of carrying out tensile, compression, bending, and shearing fesfs. Operation is manual, semiautomatic, and automatic. The test instrument can be modularised taking into account that the structure can house 3 permanently installed load cells for compression tests, and 3 sets of tensile grips for tests, including at break. Our system uses several cards (for axis and cell reader control) that are connected via CanBus to enable displacements to position or force at a feedback speed of 1000 Hz. Load cell reads are effected ì,000 times per second. Minimum indexing is 1/32,700 (this can be increased by slowing down load cell reading).
|
|
SF1491 EMSY Spring Tester
Capacity:
Model 1491:
Axial force: 50 kN (11,000 lbf)
Lateral force: 2.5 kN (560 lbf)
Applications:
The SF1491 EMSY Spring Tester is specifically designed to determine detailed force line (load center) information on automotive suspension springs.
About the SF1490 Series Spring Testers:
The SF1491 EMSY Spring Tester is a floor standing electro-mechanical testing machine equipped with Instron's EMSY load cell system that determines the true response vector of a coil compression spring under load. This information is used by spring manufacturers and suspension design engineers to develop suspensions for automobiles and light trucks with better and safer ride characteristics.
The system uses nine load cells to accurately determine the center of load position on the upper and lower spring bearing surfaces as well as all axial and lateral loads and moments generated by the spring.
|
|
Spring tension-compression machine
Product info:They are used for tension-compression, torsion, fatigue, sorting and strength testing...
Spring Fatigue Testing Machine
Product info:They are used for tension-compression, torsion, fatigue, sorting and strength testing...
Spring Torsion Testing Machine
Product info:They are used for tension-compression, torsion, fatigue, sorting and strength testing...
Spring Sorting Testing Machine
Product info:They are used for tension-compression, torsion, fatigue, sorting and strength testing...
|
|
|
The T4B Spring Tester provides accuracy, repeatability and ruggedness in a system that that makes it adaptable to the users needs for spring and resilient material testing. A rotary encoder is incorporated into the head which allows the user to test a wide variety of springs on one tester while maintaining accuracy and repeatability.
|
|
|
Spring-pressing automatic equipment. It can be combined with different elements: vibrator, further pressing systems, camera for image analysis, dynamometer measuring both power and/or position, multi-way sorter.
|
|
|
|
|
|
It’s not only in the aerospace industry that test cylinder and servo cylinder made by Hänchen are successfully used in highly demanding, decisive situations. Test and inspection facilities are nowadays an integral part of the industrial production process. The typical applications of Hänchen test cylinders include establishing the mobile safety of vehicles, the operational reliability of machines or the functional integrity of individual products and much more.
Synchronous cylinder for applications up to 25 Hz, 1 mm stroke steps. With integrated magnetostrictive or inductive position transducer system. Max. piston speed up to 1 m/s.
Synchronous cylinder for applications even above 25 Hz up to 800 Hz. Test forces from 4 to 600 kN, pressure range up to 320 bar. Fixed strokes 100, 150, 200 and 250 mm. With integrated inductive position transducer system. Max. piston speed 6 m/s in process.
Other products of the range of services:
- Clamping devices for piston rods (Ratio-Clamp®)
- Hydraulic cylinders
- Complete system solutions (Ratio-Drive®)
- Pressure intensifiers
- Industrial shock absorbers
- Special cylinders of all kinds
- Mounting parts
|
|
|
Test Benches, Cold generator group, Air generator group, Pulse benches, vibration benches with two or three axes Y or Z...
|
|
MECHANICAL TEST RIGS
Rigs for automotive, railway, aerospace and civil engineering testing :
- Seating test rigs
- Safety belt test rigs
- Suspension component test rigs
- Steering test rigs
- Transmission test rigs
- Test rigs for structures
- Test rigs for shock-absorbers
- Test rigs for rail bogies
- Tribometers
- Crash-test installations, etc.
FLUIDS TEST RIGS
Rigs for automotive, railway, aerospace, agricultural and civil engineering testing, measuring instruments :
- Static pressurisation
- Dynamic pulsed high-pressure testing
- Bursting tests
- Characterisation of circuits and components
under flow and under pressure
- Leak-testing...
Types of fluids that can be used :
Mineral oils, PAG oils, Skydrol, organic esters, glycol solutions, pure ethylene glycol, fuels, air, nitrogen.
|
|
Wind blower for environmental check/test stand technology after Kunden-Spezifikation. Special fans in axial and radial building method.
Blower for aero-dynamic tests for Environmental test/test of facilities according tons more customer specifications. Special fan in axially and centrifugal Design.
|
|
|
Automatic production test stand for assembling, running in and testing of rear brakes of operating machines.
|
|
|
The Model 4950 Two-Roll Chassis Dynamometer provides an excellent platform for single axle vehicle and vehicle corner NVH testing. The corner fixtures provide the capability to test one or two full-suspension corners with full instrumentation for performance monitoring, along with NVH data.
|
|
Who calibrated? What? When? What were the results? Plan, manage and document all your calibrations efficiently and safely by using Beamex's calibration software. In a Beamex calibration system the calibrator communicates seamlessly with calibration software.
Benefit from using Beamex calibration software:
* Easy-to-use, modern software
* Traceable and auditable calibration documents
* Paperless documentation
* Seamless communication with documenting calibrators
* Wide customization possibilities
* Extensive installation, training and after-sales services
|
|
Recently Scandura has widened its range of products, developing a solution that enables the customer to develop its customised calibration & test bench: SMCS, “Scandura Modular Calibration Solution”, its a bundle of solutions for the calibration of pneumatic, electro-pneumatic and electronic process instrumentation.
Customers can build up their solutions according to their requirements, choosing among more than forty modules developed to:
measure and generate pressure, vacuum, temperature and electrical signals,
provide power supplies and auxiliary services.
Build up your customised calibration & test bench directly on our website!
|
|
CLUTCHES TEST STAND
Automatic production test stand for multidisk clutches. It executes running in and understanding slipping torque.
|
|
|
The Model 2909 Clutch Durability Test Machine is used to measure clutch wear over extended operating conditions. Accelerated results of clutch durability may be examined over shorter periods of time and under extreme or typical operating conditions. Characteristics such as wear, slip, travel and engagement time may be viewed in real time.
|
|
|
|
|
|
1) Burst / Hydrostatic Test on CNG Cylinder
ECE R 110, ISO11439,
Technical Data:
a) Test pressure: 1-100Mpa
b) Test medium: Water, Oil, Alcohol
c) Test port: 1-3ports (Customized)
d) Pressure precision: ±1%F.S
e) Driven air supply: 0.7Mpa@1.2NM3/min
f) Standard power suuply: 220VAC, 2phases, 50Hz
2) Cycling & Fatigue Test on CNG Cylinder
ECE R 110, ISO11439
Technical Data:
a) Test pressure: 1-40Mpa
b) Test medium: Water, Oil, Alcohol
c) Max. Flow rate: 80L/min
d) Pressure cycling rate: 0-10cycles/min
e) Test port: 1-3ports (customized)
f) Ambient temperature: -40°C - 95°C
g) Pressure precision: ±1%F.S
h) Standard power supply: 380VAC, 3phases, 50Hz
3) Durability & Continued Operation on CNG Valves
ECE R 110, ISO11550
Technical Data:
a) Test medium: Air, Nitrogen, or other inert gases
b) Test pressure: 0-50Mpa
c) Test port: 1-3ports (customized)
d) Pressure cycling time: up to 10±2 seconds
e) Ambient temperature: -40°C - 95°C
f) Pressure precision: ±1%F.S
g) Driven air supply: 0.7Mpa@1.6NM3/min
h) Standard power supply: 220VAC, 2phases, 50Hz
4) Cycling on CNG Valves
ECE R 110, ISO11550
Technical Data
a) Test medium: Water, Oil or other liquids
b) Test pressure: 1-26Mpa
c) Test port: 1-3ports (customized)
d) Pressure cycling rate: 0-10cycles / min
e) Pressure precision: ±1%F.S
f) Ambient temperature: -40°C - 95°C
g) Timing range: 0.1s-10000h
h) Timing precision: 0.1s
i) Driven air supply: 0.7Mpa@1.6NM3/min
j) Standard power supply: 220VAC, 2phases, 50Hz
|
|
Connect
Auto industry
Automobile industry of subcontracting
Application
Automobile testing ground of compressor in R134a with its functional complete circuit (evaporator and condenser)
Description of the equipment
Together including/understanding:
An enclosure hot cold for the automobile compressor under test,
An enclosure hot cold for the automobile condenser,
A wet enclosure hot cold for the automobile evaporator,
A refrigerating compartment machinery,
An electrical equipment box integrating data-processing bay of piloting of the bench.
|
|
High-pressure hoses or hose assemblies have to be tested before delivery. The requirements are going further then only pressure testing. More often end users ask suppliers for more specific characteristics of hoses.
Resato hose testing machines are delivered to end users in a production environment as well as hose distributors and hose testing laboratories. The Resato machine will give you a certificate which is your quality release document.
Examples of applications in the hose tes
Hydraulic pressure testing.
Gas pressure testing.
Burst pressure testing.
Length, rotation and expansion measurements during pressurization.
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
|
|
|
|
Control valve test rig
Ventil manufactures a wide range of control valve test units for testing and (re)adjusting all sorts of Globe-, Camflex-, and Waver type control valves according to the international test standards as ANSI/FCI. The Ventil test units can be used for;
* Seat leakage testing and classification
* Body testing
* Stroking the trim
The optimal functioning of the Control valve not only exists of sufficient body & seat tightness, but more important, the total "performance" of the valve and its controls! For an accurate and reliable working effect the valve body, actuator, positioner, regulators etc. most work in a strict harmony!
Control valve test unit capabilities
* Range DN15 - 900 mm. / ½ - 36"
* Horizontal (stem vertical) or tilting clamping system.
* Clamping on the inlet flange, both flanges or (proportional clamping) between the clamping tables.
* 1 - 2000 tons of clamping force.
* With no or limited linear force on the valve body.
* Test pressure range: from vacuum up to 2000 bar / 30,000 PSI.
* Leakage range 0 - 1000 ln/min. 2100 scfh.
* Test- & operation of all sorts of linear or quarter turn actuators and controls.
* Test medium: Liquid, Compressed Air, Nitrogen, Helium or Hydrogen.
Optional features
* Computer registration system.
* Valve performance testing, considering; measuring of the stroke measuring,
open/close time and torque measuring.
* Fugitive emission and cryogenic test facilities.
|
|
The experience gained during several years in planning and achievement of test systems allows us to offer a complete range of applications for the most different needs of testing in the engine sector, especially for car traction, public transport, military resources, tramline and railway traction, marine engines, without ignoring the most recent requests in the area of electric and hybrid traction.
The sectors served are traditionally those connected to research and development, maintenance and production.
|
|
|
|
|
|
The analysis of mechanical and electrical features, of the thermal evaluation, overload capacity and technical data of electrical machines, which the most important are efficiency and performance factor, today makes heavy demands on operability and flexibility of a test system.
The scope of services comprises mechanical components such as drive-test set ups with torque sensors, small test stands with torque-speed measurement and manual or external control, as well as computer controlled complete solutions for the analysis and documentation of electrical machines.
Computer-controlled test stands can be realized with up to 6-channel current-/voltage measurement, so that a separate efficiency specification of motor and converter can be effected even for converter-fed drive systems.
Special features:
Modular conception
Most modern techniques
Use of active brakes (4-Q-operation)
Rotating torque transducer 0,1 % accuracy and speeds up to 50000 rpm
Extremely precise power analyser
Standard- and customer-specific software
Optimal project handling
Worldwide after-sales service
|
|
|
|
|
|
SOLAR300 carries out all the recommended tests to check the performances of single and three phase photovoltaic installations. SOLAR300 measures output DC power of the cells, output AC power of the inverter, solar radiation and temperature of the cells.
Measurement of AC and DC power requires the user to connect the instrument's inputs upstream (DC) and downstream the inverter. The values in single-phase installations or in three-phase installations, are acquired simultaneously. Usually the inverter and the photovoltaic cells could be far each other. To skip the use of long cables, which are very uncomfortable, SOLAR300 uses a remote measuring device, SOLAR-01, that acquires the following parameters: solar radiation, temperature of the cells and environmental temperature.
At the end of the recording, the values acquired by SOLAR-01 are transferred to the SOLAR300 through an USB connection. SOLAR300 also permits recording of each parameters, the voltage/current harmonic analysis and the voltage anomalies (sags, swells) detection. Thanks to its built-in memory and its compact flash driver a considerable volume of data can be stored for further analysis.
The innovative touch screen system of SOLAR300 makes the data analysis extremely easy. In addition, the management software Topview allows the user to create professional reports displaying the company trade mark, the user's data, the recording comments, etc.
|
|
LDS is a manufacturer of electrodynamic shakers for every vibration test need from 9N (2 lbf) to 289 kN (65,000 lbf). Our electrodynamic shaker systems offer high performance with high reliability.
Electrodynamic Shakers Features
Vibration Test Systems Complete with Power Amplifier and Vibration Controller Plus Full Capability Vibration Control and Analysis Software
Manufacturer of Over 80 Electrodynamic Shakers from 9 N (2 lbf) to 289 kN (65000 lbf)
Amplifier and Thermal Chamber Software Interfaces from Same PC Used for the Full Capability Vibration Controller Provides Seamless Lab Integration
Excellent Low Frequency Performance and Low Distortion, Ideal for High Accuracy Shock Testing
Air-Cooled and Water-Cooled Electrodynamic Shakers Offer an Outstanding High Level of Reliability, Quiet Mode Operation, and meet Clean Room Demands for Aerospace
Slip Tables for 3-Axis Vibration Testing with a Choice of Bearings to Suit Your Payload Requirements
|
|
|
|
Testing rigs
