|
|
- Solid copper connections
- "U" tube design for maximum flow of refrigerant and minimum oil entrapment.
- Inlet Flow Director professional guides refrigerant toward wall for smooth tangential flow and gradual expansion.
- "U" tube Entrance is positioned behind the Inlet Flow Director to prevent unwanted liquid refrigerant from entering and damaging manufacturers of compressor.
- Metering Orifice matched to system capacity assures optimum liquid refrigerant and oil flow back to compressor.
- Protective Screen and Orifice Assembly on U-Tube protects against foreign particles and contaminants affecting metering function.
- Professional fittings and "U" Tube are matched to accumulator holding capacity and total system charge for minimum pressure drop and maximum refrigerant flow.
- U.L. listed for 1775 psig minimum bursting pressure. File No. SA5172.
- Powder paint exterior coating surpasses 500 hour ASTM salt spray tests.
- Integral 430°F Industrial fuse Plugs (U.L. File No. SA5441).
|
|
Magister 2
Spaces requiring a particularly high level of indoor air quality (filtration, controlled temperature and humidity). Designed for installation in the space to be air conditioned.
Available in 10 models and 2 versions:
- Under: Top return and downflow in raised floor,
- Over: Front return and top supply.
Cooling capacity: 12 to 90 kW
Air flow rates: 3,000 to 22,000 m³/h
- CW: single source, not self-contained, supplied with chilled water,
- TCW: dual source, chilled water and independent backup.
- Packaged unit,
- Double-skin panels with M0/A1 insulation, self-supporting casing (models up to 45 kW) or aluminium frame (models above 45 kW),
- Choice of G4 or F7 professional filter or G4+F7 filter,
- Cooling provided by a chilled-water coil fitted with two-way or three-way cock,
- Direct-expansion cooling coil, with AIRIAL C or EUROPA 2C built-in water-cooled condenser manufacturer or separate air-cooled condenser,
- Plug professional fans with speed-controlled EC motor,
- Heating provided by hot-water coil or electric professional heater,
- Steam industrial humidifier,
- Complete electrical cabinet, CIAT µAIRCONNECT or Carel electronic control,
- Many options. |
|
The Grasso ammonia Professional dryer is a useful supplement for every ammonia refrigeration plant. It eliminates infiltrated water from the refrigerant circuit, even while the plant is in operation! Water has a huge affinity with ammonia and the combination effects the evaporation temperature and finally the efficiency of the plant.
Even low water quantities can influence the evaporation temperature by up to1K, which results in an increased power consumption of around 3%.
In addition to increasing the operating costs, the water causes corrosion, leads to rapid ageing of the oil and quickens the forming of slurry.
For these reasons the infiltrated water results in higher maintenance costs. If the refrigerant circuit is dry and clean these drawbacks can be prevented. |
|
A complete range of Climate control products is available ensuring the continued workings of your sensitive electronic components. From professional fans & professional filters to large Industrial air conditioners you can be assured ETA has the right product to keep your components cool!
The use of our Thermal software eliminates all the "guess work" previously undertaken: choosing the right cooling solution has never been easier!.
Features at a glance include:
- Wall-mounted and top mounting air-conditioners up-to 5200W
- Extra-flat wall mounted air conditioners (up to 2000W), air conditioners for suite
professional cabinets (up to 10000W)
- Air to air and air to water heat-exchangers
- Climate control professional doors in 4 different cooling capacities
- Top mount units ( roof mounting fans) "Click and fit" fans & filters available up-to
568 m3/h air-flow
- Stainless Steel versions available
- Heaters and thermostats manufacturers available
|
|
Cold Pump® Cooling Systems are thermostatically controlled, closed-loop industrial air conditioners that use CFC-FREE R22 or HFC-134A refrigerants. Room air is continuously drawn through an external professional filter, across condenser manufacturers coils (where it removes the heat drawn from the enclosure) and flows out the top external vent. The sealed enclosure remains clean and cool because internal air is cooled and dehumidified continuously as it is drawn across the evaporator coils.
Applications:
Vortec Cold Pumps are a reliable air conditioning system for electrical control panels and enclosures. These units, which maintain NEMA 12 ratings, are perfect for both new installations as well as retrofitting to professional cabinets already in place. Top and side mount models are available with cooling capacities ranging from 1800 to 6000 BTUH. Provides effective cooling protection for heat-sensitive electronics in numerous applications.
|
|
. Polikabin coldroom panels can be produced stepless up to 12000mm. height, with 60mm, 80mm,100mm, 120mm and 150mm insulation thicknesses.
. All orders outside the standard dimensions are accepted.
. Edges of the hygienic profiles used for inner surfaces are made of soft PVC and they bring together two surfaces in a completely air-tight fashion without requiring any silicon sealent application.
. Polikabin sandwich panels with polyurethane filling are the ideal construction elements used for coldroom insulation
. Panels are installed as a self-bearing structure.
. They are injected with 42 kg/m3 polyurethane and fixed to one another by eccentric locks |
|
Lytron's industrial cooling systems can be tailored to your precise requirements with a range of standard options, or completely custom designed for OEM volumes. Its cooling systems are used in a variety of applications including medical and industrial industrial lasers, analytical instruments, oncology machines, manufacturers of electron microscopes, industrial printing equipment, plasma etch systems, and solder reflow professional ovens.
Lytron offers three types of cooling systems - compressor-based chillers, liquid-to-liquid cooling systems, and ambient cooling systems, detailed below:
Recirculating Chillers (Kodiak)
Cooling capacities up to 6 kW
Kodiak compressor-based recirculating chillers are an ideal solution when you need a cooling system with precise temperature control (±0.1°C) or cooling below ambient temperature. Applications include medical equipment, medical and industrial lasers, electron manufacturer of microscopes, analytical instrumentation, semiconductor processing, and printing equipment.
Liquid-to-Liquid Cooling Systems (LCS)
Cooling capacities up to 20 kW
Liquid-to-Liquid cooling systems offer precise temperature control of process water and transfer the waste heat to facility water. They are ideal for high heat load applications where precise temperature control (±0.5°C) is needed and chilled facility water is available. Applications include medical equipment, industrial unit tools, printing equipment, and professional cabinet cooling.
Ambient Cooling Systems (Modular Cooling System%u2014MCS)
Cooling capacities up to 3.5 kW
Modular Cooling Systems are non-refrigerated cooling systems. They are a cost-effective alternative to recirculating chillers for applications where precise temperature control and cooling below ambient temperature are not required. Applications include analytical equipment, cabinet cooling, medical equipment, and laser systems.
Every cooling system that Lytron sells is backed by its world-class service operation to provide rapid and affordable service, should the need arise.
|
|
- The original activated industrial alumina solid core suction line professional filter professional dryer
- Designed for system clean-up.
- 500 hours salt spray protection.
- High capacity acid retention desiccants.
- Shortest system cut-out lengths allow installation in tight areas.
- Low pressure drop - highest effective filter area.
- Two access cocks simplify pressure drop measurement.
- Solid copper sweat professional fittings. |
|
Switchgear industrial cabinet coolers on Peltierbasis
Type: Kp
Tensions: 24V DC
Achievements: 30W - 300W
Enclosure IP 20
Operating temperature: -10 - +60°C
Aluminum corpus with stainless steel housing
|
|
Control Professional cabinet Cooler for cover and lateral attachment
Cooling capacity 320 - 5000 Watt
Electronic control systems are prone to malfunctions if exposed to high temperatures. The cooling is often performed by the blowing-in of external air or via indirect air/air manufacturer of heat exchangers without industrial filters.
As these systems always work according to the actual air temperature, the cooling performance is often unsatisfactory, especially during the hot season. The Control Cabinet Cooler has been constructed on the basis of 20 years of experience in refrigeration technology and tens of thousands of industrial cooling plants built for all kinds of applications. The cooling equipment is a unit ready for instant connection, and just an opening needs to be provided in the control cabinet for its installation.
|
|
This range of rack air - conditioning units for 19-inch professional cabinets benefits from all our experience in this industrial field.
The depth of 560 mm allows racks of 600 mm to be integrated without any difficulty.
The electrical and refrigerating components of this rack range are the same as those used in vertical and horizontal air-conditioning units. |
|
Switchgear professional cabinet air conditioning system - ventilation for the switchgear cabinet
19 " - exhaust modules:
Tensions: 12V - 230V
Deep one: 156mm to 660mm
Number of exhausts: 1 - 15
To the avoidance of warming esters in the switchgear cabinet
Circulation professional fan with swing frames
Tensions: 12V - 230V
To the purposeful ventilation of construction units
Professional filter exhaust and filter exhaust IP 55
For a switchgear cabinet ventilation with filtered supply air |
|
Rittal system climate control offers holistic process protection. This includes the cooling of sensitive electronics in enclosures and cases for industrial process driver, as well as server and network technology, regardless of the ambient conditions. But these are not isolated solutions - with Rittal, everything is interconnected. Perfectly linked and controlled cooling technology with eco-friendly, energy-efficient equipment.
From passive air climate control to active liquid cooling of high-performance CPUs, Rittal offers the full range of components and systems. They are designed precisely according to your requirements and application spectrum. Software-assisted planning and calculation of requirements, together with modular, rack-compatible technology, help to minimise investment costs, thereby offering a particularly future-safe solution with a high degree of flexibility. |
|
Cooling power : from 360 to 2500 W (L35/L35 according to DIN 3168).
To be fixed either on the front door or side panel or top panel of a cabinet.
Factory pre-set to achieve an average cabinet temperature of 35°C max.
Customer’s advantages :
- One single cut-out for professional cabinets from 850 to 2500 W.
- Powerless condensation evaporating device.
- Electronic control with alarms and safety values (high pressure, cabinet opened, cabinet temperature, professional fan and professional compressor’s thermal breakers).
- Ventilated hermetic compressor.
- Standard spare parts for all models. |
|
COMMON FEATURES
Specifically developed for mounting on the wall or professional door of
electronic enclosures, the industrial air conditioners cover a cooling
capacity range from 330W to 4000W.
Common to all models is the “Selfcleaning” supplier of condenser coil which remove the necessity of the professional air filter, avoiding the ordinary maintenance.
Most models are equipped with Condensate Dissipator (from EVE11).
The standard control is electromechanical, and as option an electronic
one (EBB). |
|
-------------------INDUSTRIAL LINE----------------------------------
*** Cantek Floor Type Split Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Hermetic compressor
<< (-5/ 5 deg. C) from 2,22kW to 5,20kW
-------------------MASTER LINE----------------------------------
*** Cantek Floor Type Split Refrigeration Unit ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Semi Hermetic Professional compressor
<< (-5/+5 deg. C) from 3,70kW to 11,20kW
<< (-18/-25 deg. C) from 3,70kW to 22,30kW
This product is already sold in following countries: United Kingdom, Ireland, Germany, Norway, Denmark, Greece, Hungary, Romania, Russian Federation, Turkey, Cyprus, Azerbaijan, Kazakhstan
|
|
The Displex DE-202 1.7K cooler is easy to use, light weight, cryogen free cryostat capable of sub 1.7K to 325K temperatures at the sample.
FEATURES
- <1.7 to 325K operating range.
- Closed Cycle Displex System with open cycle Joule Thompson (JT) circuit
- JT Circuit uses low pressure helium gas
- Continuous operation at 1.7K (no hold time cycling)
- No Orientation Limitations |
|
| New Brunswick Scientific's ultra-low temperature laboratory professional freezers are exceptionally energy efficient, quiet running and reliable, with a 25-year track record of providing safe and dependable sample storage. We now offer over a dozen lab freezer models and two product ranges to accommodate a wide variety of storage needs. |
|
Modukabin Modular Cold Rooms
Modukabin is CANTEK's range of modular cold rooms manufactured at standard dimensions with ceiling, floor and wall panels designed to lock onto one another. Their very easy assembly and disassembly save you on workmaship costs. standad panel thicknesses are 8cm. and 10cm. The floor can be made of non-slip stainless steel, non-slip plastified sheet metal or industrial plywood, whereas the walls and the ceiling can be made of pre-painted or plastified metal sheet or stainless steel.
from 2,56 cbm. to 22,47 cbm.
|
|
Monoblock Type Industrial refrigeration units
*** CANTEK COMPACT LINE ***
- Basic Equipment, low cost solution for small cold rooms and refrgrated professional cabinets.
- Hermetic compressor
<< (-5/+5 deg. C) from 0,37kW to 1,48kW
<< (-18/-25 deg. C) from 0,74kW to 2,22kW
*** CANTEK COMMERCIAL LINE ***
- Advanced Equipment, professional solution for small and mid size cold rooms and refrgrated cabinets.
- Hermetic Compression train
<< (-5/+5 deg. C) from 0,37kW to 1,85kW
<< (-18/-25 deg. C) from 0,74kW to 5,20kW
*** CANTEK INDUSTRIAL LINE ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Hermetic Compressor
<< (-5/+5 deg. C) from 2,22kW to 5,20kW
*** CANTEK MASTER LINE ***
- Extra Advanced Equipment, professional solution for mid and large size cold rooms.
- Semi Hermetic Compressor
<< (-5/+5 deg. C) from 3,70kW to 11,20kW
<< (-18/-25 deg. C) from 3,70kW to 22,30kW
This product is already sold in following countries: United Kingdom, Ireland, Germany, Norway, Denmark, Greece, Hungary, Romania, Russian Federation, Turkey, Cyprus, Azerbaijan, Kazakhstan
|
|
Monoblocks :
• EUROMON 600 > 4500 W
|
|
Cantek Multi-Compressor Systems are centrally operated systems designed to meet high capacity cold storage needs in a variety of applications in the most efficient and economical way.
|
|
| The Grasso self-limiting Automatic Air Purger removes non-condensable gases from the refrigeration system and as a result significantly improves the efficiency and the characteristics of any industrial refrigeration plant. The energy savings are usually so substantial that the initial investment in the purger is recovered over a very short period. The plant is always working at its maximum efficiency reducing the running hours of manufacturers of compressors and manufacturers of condenser professional fans and therefore increasing the lifetime of the whole installation. |
|
Atmospheric air is used for transport and cooling of the hot PVC granulate
Both horizontal and vertical industrial coolers as well as weighing and bagging stations are available from your single source |
|
Circulation chillers for professional use in research, technology and professional production at temperatures down to -30 °C
LAUDA circulation chillers of the WK class are used wherever process heat must be extracted quickly and reliably during professional chemical production processes or from technical equipment. The compact LAUDA WKL high-performance industrial coolers are designed for temperatures down to -30 °C.
Fields of application: analytical devices such as electron microscopes, X-ray equipment, refractometers, distilling systems and AAS equipment · rotary industrial evaporators and Soxhlet evaporators · vacuum technology · X-ray professional control systems, such as at airports, and semi-conductor systems · supply of cooling traps, e.g. for drying gases · central coolant supply for complete laboratories
Compared to cooling using mains water, the LAUDA circulation chillers of the WK class offer a consistent temperature, independent of the season and pressure fluctuations. A cooling temperature of down to -30 °C can be reached, this is not possible with mains water. And all that at ambient temperatures up to 40 °C. Saving water further protects the environment and reduces operating costs.
The circulation chillers of the WK class are available with different cooling and pump outputs as well as futher options like the RS 232/485 professional interface and va | | |
Refrigeration systems
