|
|
Miniature Magnetically Coupled Pumps > T Series
- Flow Rates from 5 to 650 gph (2460 L/hr)
- Differential pressures to 250 psi (17.2 bar)
- ATEX approved |
|
| Leak-free external-gear pumps that provide precise, non-pulsing flows from 1 ml/min to 10 USGPM (38 lpm), differential pressures to 250 psi (17.2 bar), system pressures to 500 psi (34.5 bar), temperatures to 350°F (176°C), viscosities to 2000+ cps |
|
Verdergear gear pumps for laboratory (max 550 l/h)
Verdergear gear pumps for industry (max 10000 l/h)
Verdergear inner geared gear pumps (high viscous fluids)
Verdergear Micro Electronic sealless gear pumps
All pumps are constructed according to the suction shoe principle. This suction shoe style design compared to the cavity styled pumps results in a higher efficiency.
|
|
| The Universal Mag Drive is the ideal sealing technology for critical liquid containment applications within Viking’s Universal Seal product line. It is dimensionally interchangeable with Viking's Heavy Duty bracketed and Universal Seal pumps, allowing for easy upgrade from packed or mechanical seals to sealless technology. The Universal Mag Drive’s hermetic, static sealed canister provides the highest level of liquid containment available by eliminating traditional dynamic shaft seals. It also eliminates housekeeping issues and downtime due to seal failure. This product is designed to handle a broad range of applications requiring continuous duty at pressures up to 200 PSI (14 Bar). |
|
| Viking Mag Drive® sealless internal and external gear pumps eliminate leakage and maintenance associated with shaft seals. For use with all hazardous/toxic fluids, hard-to-seal liquids and for 24/7 operations which cannot afford unscheduled downtime due to seal failure. Some models allow reversible direction of flow, and temporary run-dry capability. May be close-coupled to IEC or NEMA motors, or long-coupled with optional bearing carrier. ATEX conformity available. |
|
| DPP offers an assortment of quality gear pumps used in a wide range of applications, from critical medical devices to ink jet printing; from laboratory analysis equipment to water purification systems; all superbly manufactured to the highest possible standards. Tests show that the consistency of our product performance is second to none, which makes DPP the first choice for very low pulse-less flow or low noise application requirements. |
|
| Designed to operate at 50 hz motor speeds to eliminate need for a gear motor or reducer, these ductile iron internal gear pumps are well suited for chemical processing, grain processing and petroleum products. They may be foot mounted or close-coupled to IEC motors. The DIN seal chamber accepts many types of shaft seals. |
|
| The CMD series is a groundbreaking new series of sealless, non-metallic pumps specially designed for crucial liquid containment applications. This series offers several important benefits, including: 100% renewable performance with use of Viking’s recommended spare parts kit; an innovative magnet system with a patent-pending spline design that allows the magnet to self-align while floating on the shaft with no added fasteners; self-lubricating, heavy-duty bearings with patent-bearing geometry that allow dry-run capabilities; and, a unique, universal flange that allows for easy installation for both ANSI and DIN flanged systems, among other key benefits. In addition, the CMD series offers extreme flexibility, including an array of models with port sizes ranging from .25” to 1.5” (6.35 to 38.1 mm), a performance level of 100 SSU (22 cSt), normal capacity at 1450 RPM ranging from 0.34 to 16.5 GPM (1.3 to 62.5 LPM), normal capacity at 1750 RPM ranging from 0.4 to 20.0 GPM (1.5 to 75.0 LPM), a maximum differential pressure of 150 PSI (10 Bar), a maximum hydrostatic pressure of 200 PSI (14 Bar), approximate shipping weights ranging from 4 to 44 pounds (2 to 20 kg), and a maximum recommended operating temperature of 150°F (65°C). |
|
Verdergear gear pumps are suitable outstanding for most diverse
Setting of tasks within the range of OEM applications. This magnetically
propelled gear pumps do not have wave sealings
and are absolutely leakage-free from there.
The different versions with deliveries up to 11 l/min. draw
itself by their reliability and their high flexibility out.
Areas of application
- Cooling systems
- Medical technology
- Gas cells
- Dosing systems
Possible engine variants
- 24V DC
- 48 V DC
- 115 V AC
- 230 V AC
Their use
Combinations of material become special on the customer requirements
co-ordinated
Special productions are possible
Each pump can before distribution with the medium
the customer to be tested |
|
| Fully jacketed Universal Seal series heavy duty internal gear pumps for monomers and polymers such as ABS resin, epoxy resin and polyester, provide even temperature control throughout. With a variety of sealing options and many port options, including top suction/bottom discharge for reactor pumping, these pumps are widely used in place of conventional external gear pumps which require two more sleeve bearings than these internal gear pumps do. ATEX conformity available. |
|
Process Pumps - GlobalGear®
- Back pull-out design provides ease of maintenance
- Flow rates to 550 usgpm (124.9 m3/hr)
- Pressures to 200 psi (13.8 bar)
- Viscosities to 1,000,000 ssu (220,000 cst) |
|
| The Universal Seal series heavy duty process pumps are internal gear pumps offering exceptional durability and ease of maintenance. Available in cast iron, ductile iron, steel or stainless steel, they handle a broad range of liquids and process applications. These pumps offer a unique seal chamber capable of accepting shaft packing, component-type single and double mechanical seals, cartridge-type single and double mechanical seal and triple lip seals. A broad selection of port sizes and orientations (90- and 180-degree ports) allows easy installation. ATEX conformity available. |
|
Hypro roller pumps are the number one all-around choice by farmers throughout the world. The rollers (from 4 to 8, depending on the model) revolve inside the pump housing to force the spray solution through the outlet to the nozzle. Roller pumps have a low initial cost and are extremely versatile. They operate efficiently at PTO speeds of 540 and 1000 rpm and have a wide pressure range of up to 300 psi and flow rates of 2 to 74 gpm. Roller pumps are self priming and easily adapt to PTO or gas engine drives. Specific seal, roller and casting materials can be selected for compatibility with certain herbicides, pesticides, fungicides and fertilizers.
|
|
The series WA/WAU Roots vacuum pumps are provided with directly flange-mounted air-cooled standard three-phase motors. The oiled radial sealing rings of the RUVAC WA/WAU for sealing the shaft against the atmosphere are made of FPM (fluor caoutchouc).
The WS/WSU series pumps are driven by air or water-cooled canned motors.
Roots vacuum pumps of the series WAU/WSU are provided with an additional integrated pressure equalization line and a differential pressure valve.
Pumps from these series are supplied with a vertical pumping action as standard.
Advantages to the User
Two air-cooled series, each with four models
Reliable and trouble-free
Sealing rings with their housing can be readily replaced
Shaft seals and elastomer seals made of FPM/Viton
Air-cooled standard motors in accordance with IEC dimensions eg. NEMA dimensions
Easy to exchange with custom motors
Integrated pressure equalization line for protection against overloading at high pressures
Pumping direction may be changed as required
ATEX versions compliant to 94/9/EC possible
Typical Applications
For oil-free compression of gases and vapors in combination with a backing pump
Short cycle pumping processes also in the presence of large quantities of gas and vapor
Supplied Equipment
RUVAC WA/WAU are supplied as standard for a vertical pumping action, horizontal pumping action upon request
Mineral oil N 62 is used as standard
Gasket in the intake flange with dirt sieve
The required oil filling is included in separate bottles |
|
| The RTP20 (1.0 liter/rev) and RTP30 series (1.28 liter/rev) design is a proven high-speed rotary transport pump with exceptional performance, advanced durability, application flexibility, and ease of installation to help users achieve enhanced productivity for a lower total cost of ownership. This series’ tri-lobe design, customizable per customer specifications, is compact and light-weight and features removable feet and multiple mountings for easy vertical or horizontal adaptation. Both the RTP20 and RTP30 series efficiently fill rotor voids, allowing for faster and quieter operation on viscous liquids. In addition, with a longer sealing land at rotor tips, the series provides enhanced efficiency when working with lower viscosity products. The RTP20 offers a capacity to 264 GPM (1,000 L/M / 60 M³/Hr.), pressure to 145 PSI (10 Bar), viscosity to 250,000 SSU (55,000 cSt), and operates in temperatures to +230°F (+110°C). The RTP30 offers a capacity to 340 GPM (1,283 L/M / 77 M³/Hr.), pressure to 175 PSI (12 Bar), viscosity to 250,000 SSU (55,000 cSt), and operates in temperatures to +300°F (+150°C). These pumps are available with ACME threaded or tri-clamp ports as well as many other port connection types. |
|
| Designed for "on-line" continuous shearing and mixing action. A choice of modularly interchangeable stators and rotors make it versatile for processing a wide variety of products. Variable speed drives may also be used to further adjust the shear and mixing affect. Texturizes to give a smooth body and texture to such products as ricotta cheese and food pastes. Emulsifies to make stable emulsions of products with both oil and water base ingredients; blends to provide continuous, on-line blending without air incorporation or lumps of dry product; reconstitutes to assist reconstitution of powdered products such as milk powders; suspends/disperses to give stable solids in liquid suspension; polishes to improve the appearance of products by providing a smoother and more uniform surface texture. |
|
SINGLE VANE PUMPS
FOR PRESSURES UPTO 320 BAR (4650 psi) AND
SPEEDS UPTO 3600 RPM
DISPLACEMENTS-6.5 TO 270 CC (0.40 TO 16.40 cu.in)
|
|
Together with our standard stainless steel materials matching, we can offer special stainless steels, titanium or bronze.
Temperature ranges up to 350 degrees C. e.g. pumps for thermo oils.
High capacity - external gear pump
Gear dosing pump Stainless steel gear dosing pump in special design
HP radial piston pump (closed design)
High capacity internal gear pumps with integral pressure limiting valve for low noise operation |
|
Series 9000C-O
This planetary oil-bath gear drive pump achieves up to 110-117 gpm (416-443 lpm) and 80 psi (5.5 bar). The series includes models 9000C-O, 9006C-O, 9008C-O, 9016C-O, 9018C-O, and 9028C-O.
Series 9000C-O-SP
This self-priming gear driven pump achieves up to 115-119 gpm (435-450 lpm) and 77 psi (5.3 bar). The series includes models 9006C-O-SP and 90016C-O-SP.
Series 9000P-O
This planetary oil bath gear driven pump achieves up to 94-99 gpm (356-375 lpm) and 80 psi (5.5 bar). The series includes models 9006P-O, 9008P-O, 9016P-O and 9018P-O. |
|
Pump series BT and BTH are low speed gear pumps for
transfering medium and high viscosity fluids, provided they
have certain minimum amount of lubricating property, do
not contain any solids and are chemically compatable with
the materials of construction.
The standard material of construction for housing, bearing
cover and stuffing box cover is grey cast iron. The shafts
and gears are manufactured from case hardening steel, hardened
and ground. The shafts are carried in plain bearings
manufactured in bronze, with an option of sintered iron.
The rotary shaft seal is a packed gland consisting of PTFE
fillied Aramid yarn, and the static sealing between mating
parts is by means of either, liquid sealant or gaskets. All
sealing materials are asbestos free.
External axial loads are not permissable, restricted radial
loads can be absorbed, dependant on their magnetude and
direction.
Driving by flexible shaft coupling is preferred.
In the case of fluids which require elevated temperatures to
flow i. e. bitumen, wax etc. the BTH series pump should be
used. In this model the housing is double walled to provide
a heating jacked. The pump transfer chamber is heated by
circulating heat transfer fluid or steam through the jacket. |
|
KF gear pumps are used for pumping a wide variety of
fluids.
KF gear pumps are distinguished especially by their wide
range of variants which are assembled as required on the
modular principle and also permit subsequent upgrade.
The pumps are also suitable for media with low lubricating
properties.
The standard housing sections are of grey cast iron.
The gear units are manufactured from high-strength
case-hardening steel, hardened and mounted in special
multi-compound plain bearing bushes.
The standard drive shaft is sealed by rotary shaft
lip-type seal.
All pump sizes incorporate helical tooth system.
This feature, combined with special gear geometry,
results in extremely low noise levels and reduced
pressure pulsation. |
|
KF gear pumps are used for pumping a wide variety of fluids.
KF gear pumps are distinguished especially by their
wide range of variants which are assembled as required
on the modular principle and also permit subsequent
upgrade.
The pumps are also suitable for media with low lubricating
properties.
The standard housing sections are of grey cast iron.
The gear units are manufactured from high-strength
case-hardening steel, hardened and mounted in special
multi-compound plain bearing bushes.
The standard drive shaft is sealed by rotary shaft lip-type
seal.
All pump sizes incorporate helical tooth system.
This feature, combined with special gear geometry,
results in extremely low noise levels and reduced
pressure pulsation. |
|
High Pressure Gear Pumps
Lynch gear pumps are available in six different groups (0.25, 0.5, 1P, 1, 2 and 3). Different pump displacements within each group, ranging between 0.011 cu. in./rev and 5.310 cu. in./rev, can be obtained by changing the thickness of the gear tooth band. Within the same group, different flanges, shafts, inlet and pressure ports are available.
The following items are also available:
- pumps with integrated maximum pressure valve;
- hi-pressure pumps
- bi-rotational pumps
- hydraulic motors (both unidirectional and bi-directional)
- modular multiple pumps. |
|
| High economy, optimal efficiency and silent in operation. These are all important features which particularly characterize our transfer pumps. Compact design, low weight, solid construction and workmanship, anti-wear coatings, application-specific materials, sizes and seal variants, as well as numerous accessories and type of connections are additional reasons which make KRACHT transfer gear pumps more than interesting for every user. And this is our motto for every type of pump: only the best is good enough. |
|
| ... products without technical information |
| |
|
|
Gear pumps, Rotary lobe pumps
