Hydraulic gear pumps

... featuring modular design so that the product can be configured to suit the practical requirements of the machine. Multiple pumps can be assembled by combining sections of different units, different families and different ...

Tough and reliable. Option of incorporating belt drive or fitting external mounts. Pressure and directional control valves available.

... adopted for conventional pumps. Accordingly, multiple pumps can be assembled using silent stages together with conventional stages, and silent pumps can also be equipped with all the ...

Pressure: 220, 240, 260 bar

The HANSA-FLEX HK 0P ABBA Gear pump, size 0 ABBA. Properties: thread pressure side G 1/4", thread suction side G 1/4", hole pattern 66 22 diameter, cylinder diameter 7. This standard European gear ...

Pressure: 170 bar - 290 bar

The HK is a European standard gear pump measuring 1P FBBA. Possessing a thread pressure and suction side measuring G 3/8'', the hole pattern has a dimension of 71.9 x 52.4 and a diameter of 25.4.

Pressure: 140 bar - 300 bar

The HK 2P gear pump has a pitch circle pressure side of 30/M6 up to 22.8 VFU ccm or 40/M8 up to 26.2 VFU ccm. Designed by Hansa-Flex, the pump has a pitch circle suction side of 30/M6 ...

Pressure: 280 bar

... reliability and reduced noise. The range of hydraulic gear pumps is available in single or multiple pump format and can be supplied with integral relief valve. These ...

Pressure: 300 bar

... reduces the noise level up to 20 dBA compared with a conventional external gear pump. The larger the pump the quieter it is compared to the equivalent standard gear pump.

The low noise, low pulsation, high efficiency gear pump reduces noise level by an average of 15 dBA. Up to 20 dBA depending on size of pump. Including group 2, 3 and multiple pumps ...

The Type KF-F transfer pumps were developed specifically for use with fuels, especially for marine fuels. These need to be critically considered, especially regarding the lubricity. And above all, those with low sulphur. ...

Gear pumps KF are used for pumping a wide variety of fluids. Gear pumps KF are distinguished especially by their wide range of variants which are assembled as required ...

Conventional sealing gaskets are pushed to their limits with different applications. Typical applications are found in polyurethane facilities, refrigerating machines and vacuum facilities. For these applications, you have the possibility ...

Pressure: 500 bar

BIERI combination pumps consists of the very robust radial device BRK and a flanged-on external tothed gear pump. The modulare principle allows to adapt any BIERI radial piston pump ...

Pressure: 700 bar

BIERI radial piston pumps BRK are very robust radial devices with high volumetric efficiency, wide speed range and high reliability, even under rough conditions. Features Robust radial piston pump, ...

Pressure: 1,000 bar

BIERI radial piston pumps BRK are very robust radial devices with high volumetric efficiency, wide speed range and high reliability, even under rough conditions. Features Robust radial piston pump, ...

Pressure: 0 bar - 250 bar

Gear pump with reversible Rotation direction and internal drainage. Built in aluminium body, lighter than casting pumps, permits to work at high pressures with a low level of noise.

Pressure: 210, 250, 240, 200 bar

Gear pump with reversible Rotation direction and internal drainage. Rear and side ports.

Pressure: 200, 210, 230, 290, 270 bar

Gear pumps high pressure with side and rear ports wich gives ample mounting bi-directional, available for ISO 4 bolts and SAE 2/ bolts. Working pressures up to 290 bar continuous.

Combines product recycling and shear action that can be "tuned" to produce precise effect desired. Varying rotor speed and controlling back pressure at discharge port determine the number of passes the product makes through the mixing ...

Pressure: 160 bar - 300 bar

... 3APF Structure:Gear Pump Usage:construction and agriculture machinery Application:tractor crane truck excavator loader single oil gear pump Power:Hydraulic ...

Pressure: 400 psi - 3,000 psi

... Ability:100000 Piece/Pieces per Year 10000 pcs per month CBT-**/** HI/LO hydraulic gear pump for log Packaging & Delivery Packaging Details CBT-**/** HI/LO hydraulic ...

Pressure: 160 bar

Quick Details Place of Origin:Shanghai, China (Mainland) Brand Name:GRH Displacement:56-160 Pressure:160bar Rated speed:540RPM-1000RPM Color:Yellow Material:Cast Iron ...

Pressure: 0 bar - 220 bar

SERIES «K» PROFIT The best solution for hydraulic power packs Displacement 1,2-6,2 cm3/rev Maximum pressure 220 bar Maximum speed 3000 min-1

Pressure: 140 bar - 250 bar

... manufactured by Hydrosila, is a rolled aluminium gear pump that has a maximum peak pressure ranging from 200 up to 300 bar and speed from 3600 up to 4800 min. This gear pump ...

Pressure: 150 bar - 250 bar

The Series K from Hydrosila are gear pumps that are equipped with solid sleeves manufactured from aluminum alloy and PTFE bearings. Designed with an aluminum thru-bolt body, these pumps ...

Pressure: 900 bar

Integrated “Oude” Worm gear pair, low noise, high transmission efficiency, large torque Low maintenance, long service life Plunger and hydraulic diaphragm design Built-in ...

Pressure: 0 bar - 170 bar

Cast iron body; max working pressure 170 bar; max driving speed 3.000 rpm, displacement from 12 up to 41 cc; SAE mounting flanges and driving shafts.

Pressure: 0 bar - 250 bar

Cast iron body; max working pressure 250 bar; max driving speed 3.000 rpm; displacement from 22 up to 62 cc/rev; SAE mounting flanges and driving shafts

Pressure: 0 bar - 250 bar

Cast iron body; max working pressure 250 bar; max driving speed 3.000 rpm; displacement from 53 up to 110 cc; SAE mounting flanges and driving shafts

Pressure: 300 bar

... piece pumps with cast iron body and flange, available in single or multiple pump configurations. Stackable with pumps of different families. Wide range of shafts and flanges. Configurations ...

Pressure: 260 bar

Three piece pumps with aluminum body and flanges, available in single or multiple pump configurations. Stackable with pumps of different families. Wide range of shafts and flanges. Configurations ...

Pressure: 250 bar

Three piece pumps with aluminum body and aluminium or cast iron flanges, available in single or multiple pump configurations. Stackable with pumps of different families. Wide range of ...

Pressure: 190, 210 bar

Platform F Fixed displacement Size 4 … 22 Continuous pressure up to 190 bar Intermittent pressure up to 210 bar Features Consistent high quality based on large-volume production Long service life ...

Pressure: 300 bar

Features Gear pumps and motors built in three pieces with an extruded body in high resistance aluminium alloy. The wide choice of shafts, flanges and ports, in compliance with all international standards ...

Pressure: 250 bar

The pumps come in 4 sizes with rotation between 0.25 cm³/rotation to 60 cm³/rotation. Pump works at up to 250 bar nominal pressure, up to 280 bar maximum pressure and up to 3500 rpm maximum speed. They ...

Pressure: 0 Pa - 70,000,000 Pa

Enerpac high pressure, hydraulic lightweight hand pumps feature a compact design and are available in single and two speed pump types Durable glass-filled nylon ...

Pressure: 300 bar

EIPS1-016RD01-10 - EIPS segment pump - mobile hydraulic Ordernumber: 6000100006 Usage NEW DEVElOPMENT Pumps for mobile applications Electric-powered forklifts Diesel-powered forklifts Gas-powered ...

Pressure: 50 bar - 850 bar

Light weight, durable and mobile version of the original HM-103G. Can be used as a mobile power source for Wall Crushers and Rock Splitters. Oil overheating prevented by an original design using aluminum .

Pressure: 3,000, 3,500 psi

CROSS pumps and motors feature advanced design concepts which provide long life, reliable operation and high volumetric efficiency. Pumps may be chain, belt or direct driven by a gas engine or electric ...

Pressure: 0 bar - 240 bar

Salient features • Self-priming pumps • Heavy duty sleeve bushing design in a small frame size • Displacements from 9.8cc/rev to 39.9cc/rev • Working pressures up to 240bar • ...

Pressure: 150 bar - 270 bar

... describes Marzocchi external single gear micropumps, ¡heir operating features and hew to select the right pump for the required application. Miaopumps are small hydraulic ...

Pressure: 190 bar - 300 bar

The product range of Bucher Hydraulics includes single pumps 05-100-212-212HP-250HP-300-312HP (corresponding with the common group denominations: 05-1-2-2.5-3) and several combinations of double pumps, ...

Pressure: 0 bar - 170 bar

... fixed displacement cast iron external gear pumps for fluid power (hydraulic) applications. With 24 displacements in five frame sizes to 190 GPM (43 M3/Hr), some models offer pressures ...

Pressure: 330 bar

The widest range of gear pumps With a capacity from 0.25 to 250 cm3/rev., and peak pressure up to 330 bar, the JTEKT HPI range of hydraulic gear pumps ...

All sizes (group 0 - group 4), types LZP0, LZP1, LZP2, LZP3 und LZP4 Tandem and triple pumps available Displacement 0,25 - 250 cm3/rev All common designs and shafts Support bearing available as accessory