|
|
HydraCell piston diaphragm pumps are very compact and low-maintenance. By their almost pulsationsfreie and run-calm mode of operation differ this poetryless pumps substantially from conventional pump systems.
The most promotion and dosing tasks are mastered by rotary pumps, multi-level centrifugal pumps, Exenterschneckenpumpen or diaphragm metering pumps only with a very small efficiency.
VERDER HydraCell pump does not only supply to you with an efficiency of over 80%, but is also a economical alternative to well-known reciprocating and rotary pump systems. The high efficiency our VERDER HydraCell pumps is the crucial factor for the small life cycle costs (LCC).
|
|
Excellent suction performance, high speed and high pressure.
The Fristam FKL circumferential piston pumps come with really persuasive, unrivalled performance features: they perfectly combine the active principles of the Fristam circumferential piston pump FK and Fristam rotary lobe FL in one single pump.
|
|
Optimum suction performance, high discharge pressure and gentle product handling when pumping high-viscosity products.
Fristam FK pumps are circumferential piston pumps for exceptional pumping tasks.
|
|
One feature of the KOS series is its S-transfer tube. This connection of the drawing-in and pressure cylinders guarantees an almost continuous operation with free passage of the material to be conveyed without valves. Individual foreign bodies in the material to be conveyed can easily be conveyed with a particle size of up to 50 % of the outlet diameter.
The KOS easily handles highly-viscous sludges such as materials to be conveyed with a high share of coarse grain. The main field of application is thus for materials with most extreme requirements.
These are, for example:
* sewage sludges with percentages of foreign bodies
* oil sludges with percentages of foreign bodies
* bio waste and other waste
* chemical and organic high density solids with highest viscosity
* highly dewatered sewage sludges
|
|
|
|
|
|
* Brands:
Worthington,IDP,Aldrich
* Applications:
Booster,Fertilizer,Water Injection,Slurries,Pipeline,Metal and Steel Industry,Light Slurries
* Industries:
Crude Pipeline,Dewatering & Water Supply,Heavy Oil and Upgrading,Crude Handling and Treatment
* Standards:
* Misc:
Plungers are fastened to yokes by means of a patented spherically seated self-aligning connection. This connection permits the plungers to run free through the packing and align themselves with the stuffing box.
Individual Stuffing Box Assemblies are designed to accommodate a variety of packing styles as well as lubrication and flushing methods. The design provides easy accessibility for disassembly and assembly, resulting in reduced maintenance costs and downtime.
Sectionalized Fluid End Components (discharge manifold, suction manifold and working barrel) facilitate inspection, alignment or replacement without excessive pump disassembly.
Crankshaft Main Bearings, four to eight depending on model, can be rolled off without removing the crankshaft.
API 674 Lube Oil System is available as an option.
Features:
* Operating parameters
o Flows to 1140 m3/h (5000 gpm)
o Pressures to 1035 bar (15 000 psi)
o Temperatures to 400°C (750°F)
o Power rating to 3280 kW (4400 hp)
|
|
Flowserve's VTE, VQE, VSE and 9V Series of reciprocating pumps are vertical multiplunger types. Designed with flexibility in mind, they are available in multiple fluid-end designs and materials making them compatible with a wide variety of industrial applications.
* Flows to 1140 m3/h (5000 gpm)
* Pressures to 1035 bar (15 000 psi)
* Temperatures to 400°C (750°F)
* Power rating to 3280 kW (4400 hp)
|
|
A selection of piston pumps maximizes delivery of cold adhesives, including PVA, solvent-based, starch and dextrin adhesives for packaging, converting and product assembly applications.
LA 300 Piston Pumps
Accommodate 20- (5-gal), 30-, and 200-liter (55-gal) containers using 7:1 air-to-fluid ratio for precise adhesive application.
Meet specific installation requirements by offering wall-mount, lid-mount and system-trolley configurations and independent orientation of filter and motor sections.
Maintain consistent adhesive output with balanced air motor up to 120 liters per hour (31.7 gal/hour).
Use standard and wear-resistant rods to handle wide range or adhesives and production needs.
Resist corrosion with engineered plastics and stainless steel parts.
|
|
The Hypro Series 5200 Big Twin piston pump is suitable for applications in high pressure washers for industrial and agricultural cleaning needs. It is also useful as a sprayer pump to apply a wide range of chemicals. The Series 5200 is constructed of cast iron body and cylinder heads, unitized stainless steel valve assemblies and double row ball bearing supported crankshaft.
Performance Information
- Max. flow: 10 gpm/37.9 lpm
- Max. pressure: 400 psi/27.6 bar
- Max. rated speed: 600 rpm
- Max. fluid temperature: 140°F/60°C
|
|
The Hypro Series 5200 Big Twin® piston pump is suitable for applications in high pressure washers for industrial and agricultural cleaning needs. It is also useful as a sprayer pump to apply a wide range of chemicals.
The Series 5200 is constructed of cast iron body and cylinder heads, unitized stainless steel valve assemblies and double row ball bearing supported crankshaft.
|
|
|
The BINKS H.P. Range of Airless & Air Assisted Airless Spray outfits have been designed to provide sprayers with a very competitively priced, robust industrial assembly, able to apply a wide range of industrial coatings whilst providing the very best quality of sprayed finish.
|
|
|
The range of Airless & Air Assisted system ARO has been designed to provide sprayers with a very robust industrial assembly, able to apply a wide range of industrial coatings whilst providing the very best quality of sprayed finish. The packages are available in a variety of mounting options including; Tripod, Cart, Wall and 25 Litre Pail. The Pumps are complete with a 5 Year Warranty
|
|
High pressure and high fluid flow per cycle increases your production and reduces rod and cylinder wear
Severe Duty rod and cylinder handles the most abrasive coatings
Simple design makes fluid pump repairs easy
Designed for applications requiring large tip sizes, long hoses and high flow rates
Exclusive air valve design minimizes ice-related downtime
|
|
- Designed for medium- to high-viscosity UV/EB materials
- Engineered to minimize shear and thermal energy to eliminate curing of UV/EB materials
- Reliability - Eliminating downtime, the unbalanced air valve ensure stall-free operation
- Durability - Chrome-plated plunger and cylinder improves abrasion resistance
- Performance - High-flow inlet valve optimizes suction and ensures proper priming at start-up
- Serviceability - Minimal part count and modular design allows quick repair to minimize downtime
- Plunger Shroud - Covered plunger rod to keep UV rays from curing material
|
|
|
|
|
|
Engineered for compactness, economy and dependability- Ingersoll-Rand's Vacuum pumps are the number one choice for demanding applications, providing top operating efficiency combined with low maintenance. And best of all, these vacuum pumps are backed by Ingersoll-Rand, the world's leader in air compressor and pump manufacturing.
Features:
.Cast Iron Construction:
Cylinders and frame are designed with 100% cast iron for durability and long life.
.Cylinders:
Separately cast cylinders with deep fins allow for 360° cooling, removing the heat of compression. Individual bolting of the cylinders to the frame for easy inspection and maintenance.
.Low Oil Level Protection:
The low oil level switch protects the pump from operating without proper lubrication.
.Piston Rings:
Each piston is equipped with (2) compression rings and (2) oil control rings to maintain maximum operating efficiency and low oil carryover.
.Valves:
Stainless steel valves are readily accessible and inexpensively replaced if necessary.
.Connecting Rods:
One piece design permits precision aligned machining of both crankpin and piston pin bearings resulting in longer bearing life. Also allows for simple maintenance-no bolts to come loose or adjust.
|
|
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Double Ball Check Valves
Pressures up to 10,000 psig (690 bar g)
Flows up to 1,225 gph (4,637 lph)
Meets API Standard 675
|
|
Pulseless series is designed to be almost nothing of any pulsation with high accuracy by special cam and check valves.
Compact design achieved by the cylindrical cam which drives two plungers.
|
|
|
|
|
|
Piston pumps are precise and – compared to diaphragm dosing pumps – almost pressure-independent metering units. The flow rate changes in proportion to the stroke length and can thus be adjusted to very small values. Fields of application are – among others – process engineering and chemical processes, i.e.: wherever the medium must be metered precisely.
The FEDOS E / DX piston dosing pumps from Lutz-Jesco are available at flow rates between 0.17 and 31.5 l/h, with or without microprocessor control. Depending on the size of the pump, maximum pressures between 30 and 200 bar are admissible.
If no control is required for constant metering, the motor is connected directly to the terminal box. In this case, FEDOS E pumps are used. To change the flow rate, either the stroke length can be adjusted mechanically, or the speed of the motor is controlled by means of a separate frequency converter.
FEDOS DX pumps are used if an integration in controls or automatic control systems is requested.
FEDOS DX pumps allow the adaption to a large number of different control systems and system monitoring equipment. The signals required for the external avtivation of the pump can be simple voltage-free closing contacts from water meters or controllers or analog 0(4)...20 mA signals.
|
|
|
Self-serve carwash and tunnel prep unit owners across the country are making the switch to Hypro’s 2300 Series plunger pumps. Backed by the best warranty in the industry, Hypro pumps are designed for, and not adapted to, the car wash industry, resulting in pumps that deliver higher pressure and increased reliability.
|
|
URACA high pressure and ultra high pressure plunger pumps are outstanding in their compact design and flexible applications. Based on the industrial process pump design, the pumps are relatively unsusceptible to small particles in the tap water, even at high pressures.
Options
- Flanged housing for hydraulic drives ISO 125 / ISO 140
- Drain device
- Suction and discharge connections, optionally on left or right-hand side
- position of drive, optionally on left or right-hand side
- special designs: hot water, stainless steel, solvents
- stuffing box cooling / flushing is possible with power end cooling
- pump unit with electric or diesel drive
- pump unit suitable for pressure tests with ATEX certificate
|
|
Maximum pressure : 4140 bar (60,000 psi).
Working presure : from 500 up to 3500 bar (7,200 to 50,000 psi).
Max. flow rate : 10 l/min at 3500 bar (50,000 psi).
1 SUGINO intensifier (redundancy in option), 1 UHP accumulator.
Soundproofed casing.
Complete hydraulic unit, with 10 µ filtration, and water cooling.
Safety valve for automatic bleed-down of the UHP circuit.
PLC controller : support for the maintenance and the follow-up of the functioning.
Advantages :
Pumps perfectly adapted to all industry sectors : automotive, mechanics, aeronautics, food industry, and designed for a use in 3 shifts, 7 days a week.
Turnkey equipments.
Pumps with the UHP components reaching the best life times of the market.
Decrease of the running costs.
|
|
|
AccuStream intensifier waterjet machines give you a choice of 30-, 50-, 75- 100- or 150-horsepower units with adjustable pressures up to 60,000 psi. All AccuStream waterjet machines feature the AccuStream-built AIT Technology for maximum cut pressures and peak performance under the most demanding applications.
|
|
Ideal for use in remote and/or mobile locations where electricity is scarce, the iP55-280DS is powered by a 280hp Cummins turbo diesel engine that meets Tier 3 emissions standards. It is capable of producing a flow rate of up to 4.1 gallons (15.5 liters) per minute of 55,000 psi (3,000 bar) ultra-high pressure water for waterjet cutting, surface preparation and cleaning applications.
The iP55-280DS utilizes a pressure-compensated hydraulic system to drive dual plunger-style intensifiers. The use of hydraulic fluid power provides smooth flowing UHP water resulting in long system life. Reliable and precise control of the electronically shifted intensifiers ensures superior performance standards with reduced operating costs. The pump is built on a skid-mounted frame with lifting eyes and forklift guides provided for increased mobility.
A 36,000psi model is also available.
Find out more at www.jetedge.com.
|
|
The Resato Powerjet PJE waterjet cutting pump is an example of our continuing commitment to research and development.
The latest generation of our skillfully designed waterjet cutting pumps offers monitor control and simple time-saving servicing possibilities. Proven reliability reduces down-time to a minimum and the operation costs will be reduced accordingly. As a result of further developments and tests in our cutting laboratory, the life cycle of high pressure seals and other parts subject to wear has been extended considerably.
To complement our extensive range of waterjet cutting pumps we offer all waterjet cutting accessories vital to the realization of a turn-key cutting system.
|
|
|
|
|
|
The direct drive pump operates in the same manner as a low-pressure "pressure washer" that you may have used to pressure wash a house or deck prior to repainting. It is a triplex pump that gets the movement of the three plungers directly from the electric motor. These pumps are gaining acceptance in the waterjet industry due to their simplicity. At the time of this writing, direct drive pumps can deliver a maximum continuous operating pressure 10 to 25% lower than intensifier pumps units (20k to 50k for direct drive, 40k to 60k for intensifiers).
Only Flow manufactures both HyPlexTM and intensifier pumps. As a result, we can offer you the pump solution that is best suited for your application. Whether you run 24 hour, 7 days a week production or prototype jobs only a few hours a day, we have the right pump for you. Best of all, no matter which style of pump you choose, you'll receive a Flow pump that is reliable, simple, efficient, and easy to maintain. The focus of all our designs is performance, reliability and longevity so that your productivity is increased.
Flow Pumps Operate At Higher Pressures
Flow intensifier pumps are rated at 60,000 psi and our systems actually run at that pressure. No backing off, no hedging. It's another big reason why Flow equipment out-produces all others. Flow manufacturers the most complete range of ultrahigh-pressure waterjet pumps in the industry. From 205 hp, 6.5 gpm diesel powered Husky pumps for surface preparation to 100,000 psi pumps used for ultrahigh-pressure food processing to intensifier and direct drive pumps for waterjet cutting, Flow has a pump to meet your needs. Flow is the only waterjet company to offer its customers a choice of intensifier or HyPlex(direct drive) waterjet cutting pump technology. The wide range of waterjet pumps Flow builds is your assurance that you and your application will be paired with a pump that is specifically tailored to meet your needs.
Our waterjet cutting pumps set the industry standard for performance and reliability that is proven in 24 hour, 365 day a year operations around the world. All Flow pumps are capable of smooth, continuous operation, year after year, at the pressure they are rated. This ensures you receive the maximum possible benefit of pump's capacity and the performance you have paid for. It's an important distinction to make, because a pump's performance is limited by the lowest pressure it reaches in a cycle. By operating smoothly with a minimum of pressure fluctuations at the highest rated pressure a Flow pump can outperform other pumps which are rated for high pressures, but don't necessarily operate there smoothly or continually.
|
|
Hammelmann high pressure pumps are built to operate at the continuous maximum duty stated in the performance parameters. Just compare the crankshaft speed, average plunger speed, plunger diameter and power rating.
Features
- Power ratings up to 45 kW
- Vertical 3 cylinder design
- Wide variety of complementary ancillaries
Quality and reliability
- Stainless steel stress free pump head
- Bellows form hermetic seal between the suction chamber and crank section
- Choice of application specific seal assemblies
- Solid ceramic or tungsten carbide plungers
|
|
HDP 175 process plunger pump
Features
- Power ratings up to 132 KW
- Vertical 3 cylinder design
- Wide variety of complementary ancillaries
technical data
- Rod force: 82 kN
- Stroke: 75 mm
- Mean piston speed at n2; 260 r.p.m. = 0.65 m/sec; 310 r.p.m. = 0.78 m/sec; 370 r.p.m. = 0.93 m/sec
|
|
DVSR Nuclear ASME Section III Class 3, Impeller Between Bearings, Radially Split, Volute Casing, Single Stage Pump
Pump Design incorporates a volute casing and double suction impeller.
Features:
* Centerline mounted
* Operating parameters
o Flows to 5065 m3/h (22 300 gpm)
o Heads to 802 m (2630 ft)
o Pressures to 87 bar (1265 psi)
o Temperatures to 206°C (402°F)
o Power to 11 185 kW (15 000 hp)
o Speeds to 6000 rpm
|
|
The Flowserve DVSR pump was designed specifically for nuclear reactor and steam generator feed service. This single stage, high speed pump model features a volute casing and double suction impellers.
* Flows to 5065 m3/h (22 300 gpm)
* Heads to 802 m (2630 ft)
* Pressures to 87 bar (1265 psi)
* Temperatures to 206°C (402°F)
* Power to 11 185 kW (15 000 hp)
* Speeds to 6000 rpm
|
|
|
High volumetric efficiency. Self-priming and venting. Low pulsation. Low noise level. Long life. Specially suitable for demanding applications with continuous pressures up to 1000 bar. Combination with low pressure gear pumps possible.
|
|
The radial piston pumps consist of radially arranged, valve controlled pump cylinders. Higher delivery flows can be created by stacking of up to 6 radials on a common shaft. The pump is usually driven by an electric motor, which is connected with the pump by means of a bell housing and a coupling.
The closed pump housing permits "in tank" installation (hydraulic power pack) as well as the common external pump/ motor installation (pump with motor). The possibility of a radial piston pump with several pressure outlets (several equal or differing delivery flows) is particularly innovative.
Type RG utilizes slide bearings and is intended for extreme application conditions to increase the service life.
Complete hydraulic control systems can be created by directly mounting
various connection blocks and valve banks to the cover plate of the
hydraulic power pack.
|
|
|
|
Piston pumps, Plunger pumps
