|
|
| Products 121 to 150 of 197 |
The PIAB Vacuum & Blow system has been developed to increase the productivity and improve the working environment in the graphic industry.
The system consists of three main components - the pump cabinet, the computer software, and one or two hand-held remote controls. By pressing just a few buttons you can set the exact level for suction and blowing. All functions can be controlled individually from a central control unit or by remote control. Energy consumption is reduced and production is speeded up considerably. The settings for different types of paper are stored in the computer, whence they can be extracted when it is time to reprint or perform a similar task. The opportunity to use software to control the pumps provides maximum control and precision. The cabinet also includes a manual emergency control unit.
|
|
|
Kinney & M-D Pneumatics vacuum boosters from Tuthill Vacuum & Blower Systems provide additional capacity and vacuum range to vacuum pumps.
|
|
Features
- Complete system - pump head, tubing & drive
- Lok-n-Flow cartridges - easily replaceable tubing cartridges
- Bi-directional (reversible) flow control & max flow button
- Variable speed
- Console drive
- Ready out of the box
|
|
GVMAX
Dialogue between two components, the electronic vacuum swith and the gripping valve controller, allows the consumption of compressed air to be regulated ans, above all, considerably reduced.
This range of venturis is strongly recommended for the gripping and holding of non-porous materials, and for medium or long cycles. An electrically controlled blowing device is built in for the release function.
|
|
Vacuum pumps
Small vacuum pumps in various technical systems:
Oilfree piston vacuum pumps guarantee a high service life and a nearly constant suction capacity even after many thousand of operating hours.
An almost vibration free operation is a significant benefit of our oilfree multicellular-vacuum pumps .
Oil-lubricated rotary-vane vacuum pumps achieve a very high end-vacuum at a minimum noise level.
|
|
DBM Series (Exhaust & Suction)
Silent Air Pump Built-in Type
* Extremely Quiet
* Long Life
* Low Power Consumption
* Low Vibration
* Oil-less, Contamination-free exhaust air
* C.E. Compliant and U.L. listed Models
Ideal for: Medical /Environmental /Consumer/Food Industrial
*Vacuum Packaging.
*Air Surface/ Air Beds/ Air Mattress
*Nebulizer
*Aspirator
*Automatic/ Robotistic Equipment
*Air Sampling
*Gas Analyzer
*Ozone Generator
*Massage Chair
|
|
At FIPA’s integrated Material Flow how also means supplying the vacuum required – in exactly the right dosage and with maximum reliability. FIPA vacuum pumps offer you a hide performance range that has the optimum solution for your application, too.
• Rotary Vane Pumps oil lubrified
• Rotary Vane Pumps oil free
• Rotary Fine Vane Pumps oil sealed
• Piston Vacuum Pumps oil free
|
|
Oilless, dry running vacuum pumps of different principles for the OEM area.
Technologies are diaphragm, WOB-L Piston, Piston, Rotary Vane as well as Linear pumps.
Performance Range 0,5 l/min to 365 l/min Vacuum to 2 mbar abs.
|
|
A part of our oil-less compressors are also availabel as vacuum pumps. They are the ultimate solution when a quiet, reliable vacuum pump is required. A low noise and vibration level characterizes the compact, mobile JUN-AIR vacuum pumps.
|
|
As well as diaphragm and cup seal pumps, we produce unique linear-shuttle pumps that have only a single moving part, making them far more efficient and reliable than traditional pumps.
The airflow of this vacuum linear piston series lies between 3 l/min up to 60l/min, the maximum achievable underpressure is 0,933 bar.
The airflow of our linear piston compressors lies between 0,8 l/min up to 80l/min, the maximum ratet pressure is 2 bar.
Please get informed about our wide range of other pumps.
|
|
Vacuum pump: Electric centralized vacuum generation
- Dry and lubricated vanes vacuum pump
- Side channel vacuum pumps
- Suction flow: 4 to 1080m³/h
- No air consumption
- Vacuum filter and regulation valve included
Vacuum supply for suction cups on tight products
- Vacuum of 85 % : for various and current uses
- Vacuum filter and regulation valve included
|
|
Advantages
¡ Patented design
¡ High operational reliability despite fluctuating or low compressed-air pressure.
¡ Integrated high dirt holding capacity pleated filter
¡ Automatic vacuum filter cleaning system
¡ Compact size and light weight
¡ VMECA Twofold Silencer assures low noise levels and adjustable exhaust direction
¡ Optional Air-saving kit(AS-KIT) available to minimize energy consumption
¡ Optional factory installed air control/ Vacuum release valves and Vacuum switch available
¡ Easily mountable and interchangeable vacuum cartridge
|
|
|
|
|
|
SIMPLE PUMPS
Designed for slaving machines with different vacuum applications
Recommended for sucker handling of big loads since they ensure support even with power cut off.
They offer the advantage of low energy consumption with the pump working only for the actual requirements, managed by a vacuostat
Available with horizontal or vertical reservoir of minimum capacity 6 L maximum 1000 L
Capacity from 2 to 300 m3/h
Maximum vacuum level: 99%
SAFETY PUMPS
Specifically for the centralization of vacuum in sites with multiple points of use
They ensure operation 24 hours a day operating with exchange of priority between the assembled pumps.
Very low energy consumption with the pump working only for the actual requirements.
Available with horizontal or vertical reservoir of minimum capacity 150 L maximum 4000 L.
Can be combined with pump sets of capacity above 2000 m3/h.
Maximum vacuum level: 99%
PNEUMATIC PUMPS
Similar in operation to blade vacuum pumps, they differ in the use of compressed air multi-stage ejectors
Vacuum accumulation reservoirs from 6 to 1000 L
Capacity from 15 to 660 m3/h
|
|
Features
* Voltage range from 180V to 240V for single phase
* Voltage range from 300V to 440V for three phase
* Class of insulation ‘B’ Models are with IP-44 protection
Applications
* Drying
* Evaporation
* Distillation
* Evacuation of air from suction pipes and chambers
* Filtration
* Sterilisation
* Condensation
* Priming of large pumps
* Twist drilling machine
* Bottle filling
Range
* Vacuum up to 650 mm of Mercury
* Air flow rate up to 55 m3 /hr
* Power rating 0.75 kW to 2.2 kW (1 hp to 2 hp)
|
|
Meet our High Vac Dia-Va®c…… the Highest quality vacuum pumps on the market. You will find the High Vacuum Dia-Vac® pumps to be extremely reliable and quiet with minimal vibration. Available with General Purpose, Explosion proof, Air Driven, TEFC, and DC motor options. Ultimate vacuum to 3 torr (29.8 InHg) in quad head configuration or 10 torr (29.5 InHg) in double head series configuration.
High Vacuum Double Head Diaphragm Sampling Pump (RVA2-AT-BA1 shown here)
|
|
Features:
- Generates a vacuum of 696mm Hg (27.4") using water pressure above 7584 N/m2 (11 psi) and flow of 6 liters (1.5 gal) per minute
- Fits 6.4mm to 9.5mm (1/4" to 3/8") I.D. tubing
- Threaded faucet connection is 9.5mm (3/8") I.D
|
|
D5 series
Vacuum pump/compressor
Contamination free pumping of air and gas
D5 pumps provide a clean oil-free vacuum and pressure source in a small, very quiet package.
|
|
Features
- 1x10-3 Torr vacuum level
- Economical roughing source
- No moving parts
- Vibration free operation
- Heat regeneration
- Positive pressure safety vent
- Multiple pump capability
- Clean and noncontaminating operation
|
|
COAX® ensures excellent performance at both low and high feed pressures - ideal for situations where compressed air lines deliver air at low or fluctuating pressures.
Pumps based on the COAX® technology can operate within the range of 0.17 to 0.60 MPa.
|
|
|
|
|
|
We have all different kinds of vacuum pumps available to meet each individual need. Size and capacities range from 3m³/h - 510 m³/h to guarantee optimal vacuum clamping fixtures whatever the circumstances.
Liquid ring pumps
Witte offers a liquid ring pump which combines vacuum supply and liquid separator in one. This pump filters gathering coolant during machining process and integrates it into its own water cycle excess fluid is returned to cycle of machining center.
Vacuum units
Operating vacuum required can be generated in many ways. Witte vacuum units feature the following:
Oil lubricated vacuum pumps with an end vacuum rate of 20mbar absolute at full suction
Integrated pressure difference switch, which automatically switches the vacuum pump on or off thereby ensuring vacuum during machining, avoiding unnecessary idle running
Protection switch which safeguards electric motor from overheating
Air filter which protects pump from dirt (made of acrylic glass with an exchangeable air filter cartridge)
Careful assembly of compatible components guarantee trouble-free and almost maintenance-free operation using Witte vacuum units in many applications
Drainage screw for coolants which have been sucked in
3m connecting cable with CEE or Schuko plug
|
|
The HiPace MC Innovation
Magnetically Levitated Turbopumps with Integrated Drive Electronics.
HiPace MC is a line of magnetically levitated turbopumps with integrated drive electronics that operate at the maximum performance level. This not only applies with respect to their especially high pumping speeds, high compression and high gas throughput. Their magnetically levitated bearings, which assure extremely low vibration and maintenance-free operation, are the embodiment of top class technology.
|
|
oilfree piston vacuum pumps guarantee a high service life and a nearly constant suction capacity even after many thousand of operating hours.
An almost vibration free operation is a significant benefit of our oilfree multicellular-vacuum pumps .
Oil-lubricated rotary-vane vacuum pumps achieve a very high end-vacuum at a minimum noise level.
|
|
Designed for sucking up and recycling liquids or creamy substances
Used in industrial handling or clamping for products with abundant presence of liquids on the gripping surface
Can be fitted with automatic system for releasing accumulated fluids
|
|
Diaphragm pump DA1 Series
Well proven OEM design
Suitable for continuous use in OEM apoplications, The DA1 series offers oil-free maintenance free operation. Suitable for applications where space is limited and reliability is essential such as low flow gas sampling.
|
|
|
ANVER TT Series Transfer Tubes instantly provide air movement the moment compressed air is applied and their transfer speed and output flow can be infinitely adjusted by regulating the input pressure. Made from aluminum with a durable anodized finish, they come in a wide variety of bore sizes from 0.375” to 1” (9.5 to 25.4 mm) I.D., with air flows from 15 to 145 SCFM.
|
|
Pneumatic conveying is a core technology of Gericke since more than 60 years! Suction conveyors are very compact, easy to install and simple to operate. The suction unit with its integrated receiving hopper can be placed on feeders, mixers, vessels.
Combined with a weighing sysem, the units work as suction weigher, meaning that batches can be measured during conveying cycle.
The system operate purely pneumatically and are therefore suitable for hazardous areas too.
|
|
Features:
- easy material aspiration and dust-free loading of machines
- gentle conveying, no seperation of material mixtures
- optimum hygiene conditions
- reliable filter systems in GMP quality
- simple to install and to operate
- low energy consumption
- favorable investment- and operating costs
|
|
They exploit the principle of the Coanda effect
They were originally designed for sucking and transporting products like dust, granulates, sawdust, grit, metal shavings, but are also suitable for oil spray and welding fumes
Characterised by their low head and very high volumetric yield
They can also be used as blowers, or for cooling surfaces
Maintenance free, good filtering of the compressed air supply is recommended
Available with intake diameters from Ø 7 to Ø 50 mm
|
|
CMP-25 vacuum(ari,gas) micro pump are well suited for transferring,evacuating and compressing air and neutral or corrosive gases as well as vapors.
Technical Features:
1.Uncontaminated flow.
2.Non-metallic construction.
3.Compact size.
4.Maintaince free.
5.High level of gas tightness thanks to the closed diaphragm surface and special sealing system.
6.Can operate in any installed position.
|
|
|
|
Vacuum pumps
