|
|
Available in oilless or lubricated, motor-mounted or separate drive, Gast rotary vane compressors and vacuum pumps offer a wide choice of capabilities.
• Oilless or lubricated styles will accommodate a wide variety of pneumatic applications
• Self-lubricating, self-adjusting vanes on oilless models provide like-new efficiency throughout the service life of the pump
• Motor mounted or separate drive versions allow versatility in selecting the right pump for your application
• Miniature through larger size models offer an extensive performance range to satisfy most any need
|
|
From 2 to 100 m3/h (1.4 to 85 cfm) : THE BEST WAY TO MEET YOUR REQUIREMENTS
PASCAL series rotary vane pumps can meet the requirements of your specific application by offering a wide range of dedicated series :
• I series
Analytical instrumentation
• SD series
Standard non-corrosive
• C1 series
High resistance to corrosion
• C2 series
Most corrosive/Semiconductor
• H1 series
Hermetic, high tightness level
|
|
|
This new series has been studied to face different versions requests coming from the European Market and to allow different mounting possibilities. The STAR series is composed of 3 models (STAR 60, STAR 72 and STAR 84) with capacities from 10680 lt/min. to 14420 lt/min. It is supplied as series with the force feed lubrication, side outlets manifold with 1 revolving elbow, rear cast-iron oil tank (/...V version) or side sheet oil tank (/...F version) to allow the application where the space is restricted or to the more convenient place in the installation. The STAR series may be supplied, on request, with different kinds of fittings which may help the installation and/or the use of the pumps same. Every model of this series is available in versions /M with overdrive, /P for pulley application, /D direct drive, /H for hydraulic transmission and /K for hydraulic pump application.
|
|
Rotary vane vacuum pumps, oil-lubricated
Simplicity of design with only one shaft and direct drive produces robust, long-lasting vacuum pumps with low maintenance and running costs.
Rotary vane pumps, oil-free
Simplicity of design with only one shaft and direct drive produces robust, long-lasting vacuum pumps with low maintenance and running costs.
|
|
MACRO VTB
Dry running rotary vane vacuum pumps
- Bearings on both sides of the rotor
- Paper inlet filter and exhaust silencer
- Flange motor with bolt coupling
Range Technical Overview :
Capacity 170-350 m³/hr at 50 Hz and 200-410 m³/hr (118-241 cfm) at 60 Hz, Continuous vacuum 200 mbar (abs.) / 24.0 in.HgV
Possible Applications :
Printing and Paper Handling, Food packaging/ Processing, Non-Food packaging, Environmental Technology, Woodworking, Medical Technology
|
|
ILMVAC has been developing and producing rotary vane pumps for 60 years. The superior material selection and optimised design ensures the best performance and reliability. The result is a professional solution for research and industry.
Advantages of the ILMVAC rotary vane pumps for the users:
- high water vapor tolerance for chemical applications
- compact, robust and functional construction
- low noise emission
- no oil contamination of the chamber by migration or suck-back
- high pumping speed
- free of non- ferrous metals
- low, ultimate pressures is reached quickly
- direct drive with elastic coupling
- long service intervals
- low energy consumption
- easy reassembly when servicing
- permanent operation possible
- attach simply and switch on
|
|
The S 1.5 is a single-stage, oil-sealed rotary vane pump with a gas ballast valve. It is driven by a flange mounted AC motor. The shaft of the pump and the shaft of the motor are linked by means of a pinned coupling.
Advantages to the User
Very small and light-weight
Low ultimate pressure
High water vapor tolerance
Low noise operation
Simple to connect
Easy to maintain and use
Typical Applications
In all areas of vacuum engineering where a low intake pressure is required
Evacuation of refrigerant circuits
For suction, lifting, emptying, filling and tensioning
For installation in mobile instruments
Supplied Equipment
DN 16 small flange connection on the intake side
Centering ring and clamping ring
Exhaust port designed as a DN 6 hose nozzle
Carrying handle
Built-in ON/OFF switch and overcurrent circuit breaker
Oil filling
|
|
VACUUM PUMPS with rotary pallets, load factor of 100%, with lubrication forced by oil injection in closed circuit.
Standard equipment: Radiator of oversize cooling, direct drive by engine IP 55 and elastic joining, non-return valve with the aspiration, ballast of air, filters separating aerosol of high effectiveness.
- Flow: 5 to 1000 m3/h,
- Max. Vacuum: 0,5 mbar ABS,
- Engine: 0,13 kw to 22 kw.
|
|
Thanks to the high quality of material and components and to the technology of construction, the single stage UVL vacuum pumps achieve one of the best vacuum degrees attained by similar units available on the market.
UVL vacuum pumps are suitable for evacuation of small closed systems or for continuous suction within a pressure rate from 200 to 2 mbar (up to UVL18), from 400 to 0,5 mbar (from UVL25), from 400 to 10 mbar (RA version).
|
|
|
Kinney Rotary Vane vacuum pumps provide an economical vacuum source for those applications where the process is relatively clean or filtered. Gas ballast valves for vapor handling applications are included as standard equipment.
|
|
The proper use for rotary vane pumps XS is in the 1 mbar to 10-3 mbar range. VACUUBRAND oil sealed rotary vane vacuum pumps are high performance, direct drive vacuum pumps of one stage (RE) or two stage type (RZ). With small dimensions and various direct mounted accessories such as separators, full-flow oil filters with maintenance indicator and oil mist filters they are all-rounders in fine vacuum generation. Especially for applications in chemistry laboratories, they offer a high vapour capacity for water and solvents and an active corrosion protection through an oil shut-off circuit, keeping the module under vacuum and stopping corrosives from entering the pump during non-operation.
high conductance inlet
high pumping speed even at low vacuum
high vapour tolerance
for water and solvents through gas ballast about to 10% of pumping capacity. Quieter running and good ultimate vacuum even with gas ballast.
anti-corrosion design
important inner surfaces mechanically ground and plasma treated. Oil shut-off device against corrosive gases entering the pump whilst switched off.
new lubrication circuit and large oil volume
for quiet operation and longer service intervals
compact design
smaller dimensions, low weight, ease of maintenance through telescopic design
|
|
DRY
Tough, compact construction
Minimum maintenance
Excellent heat dissipation
Capacity from 2 to 25 m3/h
Maximum vacuum level 700 mmHg (92% vacuum)
DRIP-FEED LUBRICATION
Minimum oil dispersion
Low noise and vibration free
Capacity from 2 to 150 m3/h
Maximum vacuum level 720 mmHg (95% vacuum)
Available with total loss lubrication, for all applications in which the intake air contains a high percentage of harmful liquids or gasses
OIL BATH LUBRICATION
Oil bath lubrication combined with a new design release reservoir that ensures silent operation and the complete removal of oil spray
Capacity from 20 to 300 m3/h
Maximum vacuum level 759 mmHg (99% vacuum)
|
|
This unit is able to fulfil the highest requirements for a wide range of applications. By entering the load and output into your customer system, the air supply system automatically and directly adapts to the given requirements. The frequency-controlled drive unit offers a wide control range with optimised demand matching. In addition to energy savings and higher efficiency, this also results in lower maintenance requirements. The non-contact, oil-free screw unit ensures high air flows with low pulsation and lends itself to "master/slave" operation. Integrated accessories include a non-return valve, intake filter, sound absorbers and ventilation/bleed system. An air blast cooler is also available.
|
|
The new ILMVAC scroll pumps "Dry Run I and II" are intended
for use as dry-running vacuum generators in the laboratory and in industry.
The scroll pump can be operated either as a single pump or in pump
combinations. The ILMVAC DRY Run I and II have been conceived and developed as truly chemically resistant dry running pumps. The wetted parts receive as PTFE based proprietary treatment ensuring resistance to most corossive chemicals. However, chemical resistivity tolerance may vary according to the application. The pump has a gas ballast device which also ensures the pumping of vapours up to a defined maximum intake pressure. Should condensate form in the pump body, the unique vertical construction of the pump allows it to flow out of the pressure port easily.
The working pressure ranges from low to high vacuum. The dry running avoids pump oil particles from diffusing back into the suction port of the pump and on into the connected apparatus. The time consuming filling and draining of operating oil is also eliminated, which provides clean handling of the pump.
|
|
Using "multi-stage" compression, side channel vacuum pumps generate low-pulsation suction air. Perfected impeller design with curved blades guarantees Optimum efficiency. Separation of the compression chambers on both sides of the impeller permits single-stage, twin-flow as well as two-stage, single-flow operation with only one impeller. Vacuum filter and vacuum safety valve can be integrated as an optional extra in the patented design of the sound absorbers. The sound absorbers can be varied in length, affording flexible adjustment to available installation space.
|
|
COVAC SMV
Multi-stage side channel vacuum pumps
- Low noise level
- Protection from hot surfaces
- Intensive cooling
- Paper inlet filter
- Exhaust silencer and vacuum regulating valve are fitted as standard
Range Technical Overview
Capacity 180-470 m³/hr (106-277 cfm) at 50 Hz and 215-560 m³/hr (127-330 cfm), Continuous vacuum upto 200 mbar (abs.) / 24.0 in. HgV
Possible Applications
Printing and Paper Handling, Food packaging/ Processing, Non-Food packaging, Environmental Technology, Pneumatic Conveying, Woodworking, Medical Technology
|
|
The new "K" series blowers-exhausters, thanks to a unique modular design and the latest refinement in blower/technology, provide the highest ratio of performance to power.
Increased reliability, silent operation and reduction in size and weight; these are the best in the today's market.
For any further info, please visit our web site.
|
|
4 PUMPS designed for semiconductor processes
Description Applications
Adixen maglev hybrid turbomolecular pumps
5 corrosion proof features
- Automatic balancing system
- Built-in 75°C heating system
- 5 active axes
- Inert gas purge
- Inverted dynamic seal (only for ATH400 and ATH 1300)
High throughput applications
ATH 400 M, ATH 1300 M,ATH 1600 M and ATH 2300 M are designed for high pressure, high throughput pumping needed for semiconductor and other thin film coating applications.
A compact and modern design
- Adjustable rotational speed for optimizing pumping parameters
- Very high MTBF
- Low cost of ownership
- Low noise and vibration levels
- Battery free
|
|
For generating high and ultra-high vacuums SST turbomolecular pumps are
equipped with an integrated low vacuum stage.
Dry, solid-lubricated hybrid bearings with ceramic balls prevent the vacuum
being contaminated by oils, greases or their decomposition products.
The functional and design features are:
- Monobloc rotors with extremely low residual vibrations
- Special blade design for a high pumping speed and a high compression ratio, particularly for light gases
- The gap-free rotor structure gives fast degassing on the high vacuum side
- Fore-vacuum limiting pressure up to several mbars
- Oil free, so no self-generation of light gases from hydrocarbon cracking
products
- Any operating position
- Very quiet running, minimal noise level
- Maintenance free under normal operation
- Small dimensions, low weight
|
|
Typical Applications
Leak detectors
Mass spectrometers
Electron beam microscopy
TV tube manufacturing
Load locks and transfer chambers
Technical Features
Compact design
Operation in any orientation
Cooling by convection is sufficient for most applications
Air and water cooling can be added easily
Oil-free pump for generating clean high- and ultrahigh-vacuum conditions
Advantages to the User
Space-saving
Easy to integrate into complex vacuum systems
Low operating costs
Highly reliable operation also in processes loaded with particles
|
|
The company's most important product is the turbomolecular pump, or turbopump for short. This class of pumps was invented at Pfeiffer over 40 years ago and has been steadily refined. Turbopumps generate vacuums in the high to ultra-high vacuum range of up to 10-11 mbar.
|
|
The SPP Pumps Autoprime range is engineered to be durable for the extent of applications for which it may be used. The fully automatic product is capable of a 9m (30ft) static suction lift and ranges from 25mm (1") to 500mm (20") discharge size. Flows to 2600m3/h (9,500 lgpm) and discharge heads up to 160m (525ft) with excellent solids handling up to 120mm (4.75%u201D) diameter coupled with a dry-running capability.
The Autoprime vacuum assisted pumps are available on site wheels, high speed road trailer or skid. They can be supplied as open or enclosed in an acoustic canopy.
Modular construction allows high interchangeability of components and ease of maintenance.
The SPP Pumps Autoprime is a proven, versatile and comprehensive product range suitable for use in a variety of applications Worldwide.
The Autoprime is primarily sold to rental organisations, contractors, utility companies and open cast mines, providing a durable solution to the Customer needs. Continual investment in marketled research and development ensure that the products are designed to meet market requirements and legislation, providing significant benefits and solutions to owners and users alike.
|
|
The PIAB Vacuum & Blow system has been developed to increase the productivity and improve the working environment in the graphic industry.
The system consists of three main components - the pump cabinet, the computer software, and one or two hand-held remote controls. By pressing just a few buttons you can set the exact level for suction and blowing. All functions can be controlled individually from a central control unit or by remote control. Energy consumption is reduced and production is speeded up considerably. The settings for different types of paper are stored in the computer, whence they can be extracted when it is time to reprint or perform a similar task. The opportunity to use software to control the pumps provides maximum control and precision. The cabinet also includes a manual emergency control unit.
|
|
|
Kinney & M-D Pneumatics vacuum boosters from Tuthill Vacuum & Blower Systems provide additional capacity and vacuum range to vacuum pumps.
|
|
Vacuum pumps
Small vacuum pumps in various technical systems:
Oilfree piston vacuum pumps guarantee a high service life and a nearly constant suction capacity even after many thousand of operating hours.
An almost vibration free operation is a significant benefit of our oilfree multicellular-vacuum pumps .
Oil-lubricated rotary-vane vacuum pumps achieve a very high end-vacuum at a minimum noise level.
|
|
At FIPA’s integrated Material Flow how also means supplying the vacuum required – in exactly the right dosage and with maximum reliability. FIPA vacuum pumps offer you a hide performance range that has the optimum solution for your application, too.
• Rotary Vane Pumps oil lubrified
• Rotary Vane Pumps oil free
• Rotary Fine Vane Pumps oil sealed
• Piston Vacuum Pumps oil free
|
|
|
|
Vacuum pumps
