|
|
| Products 91 to 120 of 133 |
Materials:
. polypropylene
. polyethylene tubing
Attaches to faucet for maximum free air pumping capacity of 11.5 liters per minute at a water flow rate of 6.5 liters per minute. Operates efficiently with water pressures as low as 7.5 psig (.517 bar) for minimum water consumption. Ultimate vacuum: 28-1/2 in. (723.9 mm) Hg. Supplied with integral check valve, 3/8-in. NPT connecting thread, and 4-3/4-in. length of tubing for insertion in discharge end. |
|
Sop Caliber: ¦µ80mm;
Water Exceeding Caliger: ¦µ65mm;
Dry Weight: ¡Ü92kg;
Maxinmum Torque: 22HP/3600RPM;
Way Of Starting: Electric start
At Rated Pressure: 1400L/min/0.95map;
Priming Time: ¡Ü20s;
Sucation Head Max: 7m
Overall dimension[mm(in)](LXWXH): 650X610X650mm |
|
COAX® ensures excellent performance at both low and high feed pressures - ideal for situations where compressed air lines deliver air at low or fluctuating pressures.
Pumps based on the COAX® technology can operate within the range of 0.17 to 0.60 MPa. |
|
Designed for sucking up and recycling liquids or creamy substances
Used in industrial handling or clamping for products with abundant presence of liquids on the gripping surface
Can be fitted with automatic system for releasing accumulated fluids |
|
| ANVER TT Series Transfer Tubes instantly provide air movement the moment compressed air is applied and their transfer speed and output flow can be infinitely adjusted by regulating the input pressure. Made from aluminum with a durable anodized finish, they come in a wide variety of bore sizes from 0.375” to 1” (9.5 to 25.4 mm) I.D., with air flows from 15 to 145 SCFM. |
|
Pneumatic conveying is a core technology of Gericke since more than 60 years! Suction conveyors are very compact, easy to install and simple to operate. The suction unit with its integrated receiving hopper can be placed on feeders, mixers, vessels.
Combined with a weighing sysem, the units work as suction weigher, meaning that batches can be measured during conveying cycle.
The system operate purely pneumatically and are therefore suitable for hazardous areas too.
|
|
Features:
- easy material aspiration and dust-free loading of machines
- gentle conveying, no seperation of material mixtures
- optimum hygiene conditions
- reliable filter systems in GMP quality
- simple to install and to operate
- low energy consumption
- favorable investment- and operating costs |
|
They exploit the principle of the Coanda effect
They were originally designed for sucking and transporting products like dust, granulates, sawdust, grit, metal shavings, but are also suitable for oil spray and welding fumes
Characterised by their low head and very high volumetric yield
They can also be used as blowers, or for cooling surfaces
Maintenance free, good filtering of the compressed air supply is recommended
Available with intake diameters from Ø 7 to Ø 50 mm
|
|
MULTIEVACUATOR
Many conveying jobs in the plastic processing industry can be solved efficiently by using pneumatic conveying systems.
By combining the Multievacuator vacuum unit with Kongkilde’s OK160 pipe system, efficient conveying systems can be tailor-made to meet most conveying demands from process to process or, to and from a storage facility.
Depending on distance and material, conveying systems with capacities up to 7,000 kgs/hr (250 lbs/min) can be achieved.
The Multievacuator unit is an integrated solution based on a high-pressure centrifugal blower with a cyclone-like separation unit, in such a way that the conveyed material does not pass through the fast-rotating blower rotor.
|
|
| Pneumatic hopper loaders with single phase blower, with a capacity ranging from 1.5 up to 10 dm³. The range includes also the ideal solution for small tonnage machines. All models are equipped with microprocessor control and are factory pre-set in order to ensure optimal functioning. |
|
FIPA Vacuum units are compact systems for all kinds of vacuum clamping and handling work.
They consist of a safety tank, one or several vacuum pumps as well as monitoring and control equipment. The vacuum is generated in the safety tank so that it is available whenever required. An integral vacuum switch activates a pump as soon as the vacuum drops below a preset value. The unit does not consume any power when it is not in operation.
Available for horizontal or vertical installation and as safety vacuum units, for example for hospitals and laboratories.
|
|
STERLING SAT - (SIHI Anlagentechnik) has for the last 30 years been successfully involved in the manufacture of high quality engineered systems for the pharmaceutical, chemical, and all other process industries.
PERFORMANCE
• Up to 100,000 m3/hr.
• 10-3 mbar up to atmospheric pressure.
WORKING IN PARTNERSHIP
Our understanding of your application and process requirements, enables us to provide the engineered solution that is right for you.
Typical vacuum generation packages include:
• Liquid ring vacuum pumps.
• Mechanical boosters.
• Gas ejectors.
• Steam ejectors.
In order to optimise a vacuum system and to reduce the amount of external involvement the vacuum units can include:
• Pre condensers.
• Post condensers.
• Heat exchangers.
• Scrubber systems.
• Separators.
Typical applications for all types of gases and vapours:
• Vacuum distillation.
• Extruder degassing.
• Vacuum drying. |
|
| Engineered Dry Screw vacuum systems incorporate Kinney Dry Screw vacuum pumps into complete vacuum systems with vacuum boosters, custom controls and accessories to combine high pumping speed with deep vacuum levels. Flows range to 10000 CFM (17000 m³/h) with vacuum levels to 10 microns and below. |
|
| Our Liquid Ring Vacuum Systems are ideal for pumping wet gas mixtures at low pressures. A wide variety of configurations are available, incorporating Kinney or atlantic fluidics liquid ring vacuum pumps. Performance ranges to 560 CFM (950 m³/h) in standard systems, or to 10000 CFM (17000 m³/h) in Engineered Solution Vacuum Systems. |
|
| Booster/Piston vacuum systems combine a rugged, oil-sealed Kinney vacuum pump with a vacuum booster to supercharge the pump, allowing for deeper vacuum or greater throughput. Performance ranges to 2000 CFM (3400 m³/h) in standard systems, or to 10000 CFM (17000 m³/h) in Engineered Solution Vacuum Systems |
|
| Electric and Compressed Air Powered Vacuum Pumps, Vacuum Generators and Vacuum Stations, Vacuum Valves and Switches, Vacuum Filters and Exhaust Mufflers, Air Movers and Transfer Tubes, and a wide range of Vacuum System Accessories, all available at competitive prices. |
|
The Kavac series of vacuum products includes a wide variety of conventional vacuum components, as well as more specialised items such as variable vacuum pumps, material transfer and air amplification units. KV's vacuum division is also able to deliver customer-specific vacuum solutions; often developing customised pumps or completely integrated vacuum control systems. A comprehensive range of vacuum cups complements the Kavac range.
|
|
Theis is most significant model base on the multi stage principle Low compressed air are required far massive evacuation volumes at high vacuum flow and high vacuum level rate. V-tec air saving kit is available in this pump in order to maximum reduce the energy usage. VITON & EPDM seals can be also stipulated as option.
|
|
| The KTM series has been recently planned and manufactured with vanguard technical solutions and with materials of high technology. This series is composed of 4 models (KTM 1200, KTM 1500, KTM 1800 and KTM 2300) with capacities from 21500 lt/min. to 36300 lt/min. and it is available in versions HFR and PFR. The Exhausters/Compressors are equipped, as series, with an automatic lubrication system and, on request, with a water-cooling system on the body and flanges too. The building characteristics of Exhausters/Compressors of KTM series allow a continuous use. There are also available many fittings to complete the application. |
|
| ... products without technical information |
| |
|
|
Vacuum pumps
