Flow rate: Nominal 25 Litres/min (6.5 gallons/min)
Self-priming from dry up to ...
Flow rate: Nominal 14 Litres/min (3.5 gallons/min) at 1500rpm
Self-priming from dry up to ...
General description
Chemsteel R&S Series pumps are designed to handle corrosive liquids that need to be pumped at pressures up to 150 psi. These pumps are manufactured ...
Flows from 0.5 to 30 GPM at 1750 RPM
Pressure from 0 to 150 PSI
Gear & bearing combinations of metallic and nonmetallic wear surfaces.
Slotted bearings ...
DC GEAR PUMPS FOR OIL (12 or 24 V)
Gear pumps for oil up to ISO VG 320 viscosity with 12 V DC (35 Amp) or 24 V DC (16 Amp) IP-55 motor. Pump gears are manufactured in sintered steel and the pump includes carrying handle and 2 m cable with crocodile ...
AC OIL PUMPS, ELECTRIC PUMPS
Internal gear electric pumps for lubricants. 230V 50Hz, IP-55 protection motor with on / off switch. Cast iron pump body, sintered steel gears and by-pass valve. Motor with mounting feet, the pump can be mounted horizontally on a flat surface or vertically on a wall.
Some versions include an electric pressure switch that automatically starts the pump once ...
Extrusion Line Synchronization Made Easy. With an Xaloy pump between your extruder and die you can directly dial in gauge control, eliminating extruder surge and screw beat at the die. Extruder screws efficiently melt, mix and convey polymer, but are not as efficient at providing a consistent ...
Extrusion Line Synchronization Made Easy. With an Xaloy pump between your extruder and die you can directly dial in gauge control, eliminating extruder surge and screw beat at the die. Extruder screws efficiently melt, mix and convey polymer, but are not as efficient at providing a consistent pressure and volume to the die. A melt pump, while not a ...
To come up with a really good product demands plenty of knowledge and fresh, innovative ideas. ...
2CY type normal geared lubricant pump is mainly used to transport lubricating oil in lubricant system of all kinds of machine and equipment. It is applicable to transport ...
Internal gear pump with axial and radial gap compensation
Radial ...
The new, efficient mixing method is based on the proven centrifugal pumps of the Fristam FP range. Instead of the impeller, a rotor/stator system operating at tip speeds of up to 38 m/s, draws inhomogeneous media through ...
Galtech is specialized in pumps production from group 1 to group 3, divided into 29 displacements: from 0,9 to 62 cc, and up to 320 bar of max working pressure.
Pumps are available with cast iron flanges and ...
Available soon !
Forget the past, deep into the futur with our internal gear pump TORR !
POWERFUL, EFFICIENT, RESISTANT !
Five cylinders ...
Our Internal Gear Pumps belongs to family of Positive Displacement Pumps where in driving gear with internal tooth drives the internal Gear and turns in same direction inside the pump casing.During ...
The X series hydraulic gear pumps are a new product which completes the range of products in the area of lower outputs. They are manufactured of aluminium alloys with steel gears. They are equipped ...
High Pressure Gear Pumps
Lynch gear pumps are available in six different groups (0.25, 0.5, 1P, 1, 2 and 3). Different pump displacements within ...
Planetary spinning pump with integrated rotating mixer for melt homogenization (Barmag patent)
Technical ...
Our gear pumps include versions for medium, high and very ...
APPLICATIONS Varnish, thick oil, viscous liquids, glue, ...
From block pump to pumps with cooling device, the SAWA ZR series are the robust allrounders for a broad range of industrial applications. They are suitable for ...
PFG are fixed displacement external gear pumps, axial ...
Flow rate
between 70 l/h and 205 l/h
between 0.30 USGPM and 0.90 USGPM
Outlet pressure
up to 9 bar / 130 psi
Possible liquids
oil / fuels between -20 °C and +80 °C
Design
externally ...
Positive displacement pumps
Positive displacement pumps have a capacity directly proportional to ...
In a wide range of products from simple to demanding applications to blend, emulsify, disperse, dissolve and homogenize, TRL-H series with unique impeller-vane, inducer design enablles quick dissolution and hydration of stablizers, gums, powders, sugars and any fluids requiring sensitive shearing.
Features
The TRL-H Series blenders are ideally suitable for various ...
Model UP2/Oil and UP2/P are self-priming, compact, powerful, 12 or 24 VDC electric gear pumps. UP2/Oil is constructed of helical bronze gears, nickel-plated brass body and stainless steel shaft. UP2/P has ...
Series UP3/4 Gear Pumps for Water & Engine Oil
Model UP(3,4)/Oil, and UP(3,4)/P are self-priming, compact, powerful, 12 or 24 VDC electric gear pumps. UP3/Oil is constructed of helical bronze gears, nickel-plated ...
The DGD09 Series direct drive gear pumps derive from the well-established mag drive MG200 Series. Built to handle clean water and relatively viscous fluids at ...
A range of gear pumps with aluminium body. ...
Gear pumps with aluminium bodies, ...
PLA hydraulic gear pumps and motors with aluminium ...
