|
|
IMADA has wide range of attachment for various applications.
We also can produce special attachment as customized version.
Please request special gripping fixtures. |
|
Atlas Copco provides a complete line of products for measuring torque, angle, pulses and speed within all types of assembly industry.
The ACTA 3000 enables you to perform a full range of functions, from simple torque checks to advanced graphic tightening analysis. It comes in different models to cover all your needs, and is upgradeable. The ACTA 3000 together with the Tools Talk ACTA software, is the user friendly complete quality management system! The system will automatically give you information when the tools are due for calibration. With ACTA 3000 it's possible to have all tools, the tightening database and supplier database organized all in one place. With the ToolsTalk ACTA software and you have a complete quality management tool at your service or your complete ISO 9000 under one icon in your PC. Quality management has never been easier!
Atlas Copco provide instruments that will measure torque from 0.05 Nm up to 3.500 Nm.
|
|
| With the boxes of measurement of couple Weber: finished the long discussions concerning the couples of screwing. |
|
| By automated and manual procedures, DSM tightening tools of the BL/BLH series take care of a reliable tightening operation. Low-friction mounted gearing stages and the maintenance-free brushless motor guarantee a maximum quiet running or the tightening tools. Different types from a torque between 0,5 Nm and 2000 Nm are available. A self-resilient torque and angle of rotation transducer additional increases the tightening safety. Torque and angle of rotation transducers assure a 100 % tightening connection by all types. By the own production are customised executions possible at any time. |
|
Mecmesin offer a range of sophisticated Computer-controlled Test Frames. The Multi-test-i is available in a range of capacities to accommodate all your testing requirements, from the entry level MultiTest 1-i through to the advanced twin column test frames that have been specifically designed to test large or high load samples or products.
Intelligent loadcells mounted to the test frame allow the MultiTest-i to download data directly to a PC via the serial port at a rate of 2000 times a second. If your test requirements change then the MultiTest-i can easily be upgraded with a different load cell suppliers that meet your new testing requirements.
Emperor, Mecmesin’s powerful yet user-friendly professional control software, provides both a simple platform for routine analyses on the factory floor, as well as an advanced platform for sophisticated laboratory test routines. Programmable functions include running a test to a pre-determined force/torque, displacement, time or to break, as well as graphical interrogation of results.
Applications
The MultiTest-i range of motorised test stands can be used for many different applications including:-
Compressive testing
Deformation testing
Extension testing
Materials testing
Medical device testing
Packaging testing
Spring testing
Tensile testing
Textile testing
Top-load testing
Mecmesin offer a wide range of standard grips and fixtures, to hold your specimen. Alternatively, a custom-built fixture can be designed for your specific application. |
|
Chatillon® DFE Series
The Chatillon® DFE Series is a compact, easy-to-use force gauge designed for economy applications without compromising functionality. Ideal for handheld or test stand applications, the DFE is available with capacities from 2 lbf (1 kgf, 10 N) to 500 lbf (250 kgf, 2500 N). The DFE features an integral loadcell with a measurement accuracy of better than 0.25% full scale. A large, easy-to-read, high resolution dot matrix LCD display supports a variety of standard gauge functions including normal and peak readings, high/low limits, setpoints, pass/fail results, statistical results, loadcell actuation and direction. Loads are displayed in ozf, gf, lbf, kgf and N units. The display can be inverted and displayed results may be "hidden" from the operator. The DFE gauge may be specified with or without RS232 serial communication. All DFE Series force gauges come with a carrying case, battery adapter/charger, testing accessories and NIST Certificate of Calibration with data. Uncertainty data per ISO/IEC 17025 is supplied standard.
Standard Gauge Measurement Functions
Normal Tensile and Compression Measurement
Peak Tension and Compression Measurement
Pass-Fail Limits
High & Low Setpoint Limits
Statistical Calculations
|
|
Simple digital force gauge : CENTOR FIRST
Simple and yet complete, the CENTOR First force gauge uses efficient technology to simplify force measurements, in tension and compression ...
Graphical force gauge : CENTOR EASY
Simple and complete,the CENTOR "Easy" is the best instrument for measuring in the workshop.The screen provides simultaneous readout of the current and maximum values as well as...
Advanced graphic dynamometer : CENTOR STAR
The CENTOR "Star"has many functions.It will become your preferred force measurement tool.The graphic screen professional displays the complete Force=F(t) curve ,...
Two detection force gauge : CENTOR DUAL
It has all the functions of an STAR force gauge, but its calculation power enables it to record values sent by 2 different sensors simultaneously |
|
Mecmesin digital force gauges are state of the art instruments, specifically designed to measure force in tension and compression (push or pull) with optimum precision and performance.
The Advanced Force Gauge (Mark 4) is the most versatile and fully-featured instrument offered by Mecmesin. The AFG comprises of 10 different models ranging from 2.5N to 2.5KN with the added ability of 1st peak and ultimate peak hold. The bi-directional interface (RS232, Mitutoyo, Analogue) ensures full data transfer between PC's, data-loggers and Mecmesin stands. All AFG's feature superb accuracy at ±0.1% of full scale and a industrial sampling rate of 5,000 times per second.
The BFG (Basic Force Gauge) range of rugged, flexible and reliable instruments are designed for easy operation and outstanding force measurement performance - all at a budget price. A precise and reliable instrument, the BFG features accuracy at ±0.25% of full scale and a sampling rate of 1,000 times per second.
The CFG (Compact Force Gauge) is a pocket-sized, lightweight and low-cost force gauge, ideal for performing elementary tension and compression testing. The CFG is available in 3 capacities and features include a data sampling rate of 10Hz, accuracy of ±0.5% and versatile measurement options lbf, N, ozf, kgf and gf, with a resolution of 1:1000 or better.
Used either handheld or combined with a test stand and accessories they offer a complete testing solution for a virtually limitless range of tension and compression applications. |
|
It is the force measuring instrument of the electronic formula which can measure both tension and compression power by single axis.
It excels in a response and measured value is displayed in an instant. Since it is a digital instrument, various functions are available. For example, the memory function which can memorize up to 1000 measuring data, comparator function which can program high and low set points. ZP series has USB output function and it becomes easy to connect a computer. Using optional software, it is possible to make precise force-time chart by high speed USB communication. By using with a test stand, it corresponds to a large area from the field of a quality control to the field of research and development.
|
|
Digital torque gauge : CENTOR W Easy torque gauge with TH senso
Connected to a large range of torque sensors, this CENTOR is a very accurate and solid digital torque gauge.
Most versatile torque gauge : CENTOR W Star with TH sensor
Besides having all the functionalities of the CENTOR W
Easy, the CENTOR W Star torque gauge provides handy further possibilities. It is the most versatile instrument yet designed for all tests in industrial surroundings.
Equipped with the TH sensor, this torque gauge is used to measure low torque levels.
Digital torque gauge : CENTOR W Easy with TW sensor
Using the CENTOR technology, the CENTOR W
Easy digital torque gauges have a very large graphic monitor and show a maximum quantity of information
for more efficient measuring.
The Easy torque gauge with TW “wrench” sensor is used to measure high torque levels and when the measurements cannot be made in the axis.
Most versatile torque gauge : CENTOR W Star with TW sensor
Besides having all the functionalities of the CENTOR W
Easy, the CENTOR W Star torque gauge provides
handy further possibilities. It is the most versatile instrument yet designed for all tests in industrial surroundings.
Equipped with the TW sensor, this torque gauge is used to measure high torque levels and when the measurements cannot be made in the axis.
Digital torque gauge "cylindrical" : CENTOR W Easy with TT-sensor
These digital torque gauges have a very large graphic display and show a maximum quantitiy of information for more efficient measuring.
The CENTOR W Easy with "cylindrical" sensor is used to measure torques when the sensor has to be integrated in an assembly.
Basic mechanical torque gauge : UT CM
A basic torque gauge, especially well suited for all measurements of low torque levels in production or in the laboratory. |
|
| The Mecmesin range of digital torque gauges and systems is based upon the AFTI display unit, together with an appropriate `smart` torque sensor and gripping fixture. |
|
The DFS-II is a system used for testing the force on the tip of the tool of a wire bonder and in some die attach bond heads as well. The DFS-II system scope professional displays a wave form that permits the user to establish whether there is excessive vibration, impact force or unwanted movement on the bond head as it touches down on the surface of the DFS-II Sensor. The wave form can then be printed on the on board professional printer for hard copy recording.
This is a perfect tool for calibration, troubleshooting, setup and verification of machine operation. Both force and time duration can be measured in actual units (force in grams and time in milliseconds) without the need of conversion charts or extra calculations. The DFS-II can be used with wedge bonders of any type (automatic, semiautomatic and manual) and of any manufacture. Maximum force measured by the sensor is 500g.
Contact us at mailus@hybond.com for more information. |
|
The LCIC-WIM is the 2nd generation to our popular line of Force gage Interface Card that thousands of them are being used all around the world. The LCIC-WIM samples the Load Cell in a rate of 52,000 samples per second so, it fits all dynamic weighing and force measurement applications.
The package includes also our unique LCIC-WIM Professional monitor utility which is a vital tool for analyzing dynamic load/force applications. It allows to collect the data, showing the results in graphic mode or save it for later use in excel etc.
The communication with the LCIC-WIM is via USB or RS232/485 so, it can be used with almost any PROFESSIONAL PC or other professional computer.
|
|
25.4mm LCD display
Accuracy 0,1% Emax
Shackles included (D150E-12 excluded)
Professional remote control included
Radio transmission LPD 869,87 MHz (available)
Capacities (Kg.)
1.000, 3.200, 6.500, 12.000
|
|
Vishay Micro-Measurements instruments are a complete range of high-quality instruments engineered specifically for strain gages.
|
|
- The cell is manufactured in aluminium alloy with HT steel bushes.
- The cell incorporates an eight gauge bridge together with
associated electronics and a 9 volt PP3 non-rechargeable battery.
- Built into the load cell manufacturers is a large [20mm] 3.5 digit liquid
industrial crystal display mounted on the front of the cell for easy reading
from the operator's position.
- The load cell is self contained and has no external cabling.
- A battery switch is provided on the rear of the cell to prolong
battery life when the cell is out of use.
- All set up and calibration data is retained when switched off.
- The cell is automatically switched off after 15 minutes to
prolong battery life.
- Battery life - typically 50 hours. |
|
| Radio contact and intreface RS 232, Utmost precision (0.2% of the capac. nominal), recording of the maximum value, endurance battery 200 working hour, posting LCD, warning of overload, indicator charges battery, protection IP 54, coeff of safety 500% of the CMU. |
|
| For precise repeatable and reproducible measurements, test stand is necessary in order to keep same test condition. It also negates the need for heavy manual labor when applying large forces, and makes the task of obtaining measuremnets more efficient. |
|
the simple BAT Stand
BAT 750
To insure the correct positioning of the force gauge in relation to the sample to be tested, the simple BAT Stand is the ideal solution.
the simple BAT Stand
Basic motorized test stand
BATDRIVE
The BATDRIVE basic motorized test stand is a force gauge support designed to test samples at a regular speed; it is especially well suited for small parts, and for tests requiring low force levels (less than 500 N).
Basic motorized test stand
The 1 to 5KN test machine
STENTOR
The STENTOR 1000, 2500 and 5000 are designed to carry out tests for all applications in which the displacement speed is specified by a standard, together with all applications in which the speed can have an influence on the measurement itself.
The 1 to 5KN test machine
The 5 to 50KN test machine
ATLAS
The ATLAS 5 to 50 KN test machine is designed to carry out tests in all cases where the force necessary is greater than 5 KN. |
|
The console-controlled range of MultiTest-x test frames display load, displacement and speed. Simple test programs can be created and stored.
The MultiTest-x has been designed specifically to meet the requirement for ease of routine use in QC laboratories, or production environments which are often not ideal areas for using a PC. |
|
Features:
- Dull Tool Detection
- Broken Tool Detection
- Industrial grinder Gap Elimination
- Tool Touching Workpiece
- Misplaced Workpiece Detection
- Overload Protection
- Crash Avoidance
- Wear Compensation |
|
FEATURES
The LMTX is a new system for the monitoring of hook load for telescopic cranes also when mechanical extensions are used. The system is composed by a transmission unit LIM-TX, which is hanged on industrial crane hook, and by a receiver unit LIM-RX positioned in the control panel unit.
The LIM-TX is composed by a strain gauge pin for load detecting and by a micro controlled professional transmitter to send by radio the data weight to the receiver unit.
The new structure of the shackle hook group does not limit the lifting operations.
The unit LIM-RX has two functions: the show of the data weight through a four digits red display, the load limits control.
If used with mechanical extensions (up to four jibs) the LIM-RX allows, through a push button, to set the numbers of jibs and consequently to control the overload limits by a relay contact and a LED indication.
The device is included in SRD (Short Range Device) classification and uses a frequency band of 868.3 Mhz of free use (without any authorization).
The LIM-TX unit works with a battery rechargeable by the truck lighter and the LIM-RX unit works by a 12..24 voltage battery.
Free maintenance. No interference with the other on board radio devices.
APPLICATIONS
Load monitoring
Overload monitoring
|
|
It is the force measuring instrument of the mechanical type of the power feeder needlessness which can measure tension and compression force easily and correctly.
Based on our long history of technical achievement as a force gauge pioneer with the variety of know-how, IMADA mechanical force gauge is produced under advanced technology and severe quality control, and maintain early high precision for a long period of time. |
|
Dial force gauge : NK
This dial force gauge has been designed to meet demand for a reasonably priced instrument that is robust and reliable.
It can be used in tension and compression, to easily carry out the main force measurement tests required in the fields of mechanical and electronic engineering production.
Spring balance : SMS
Simple, robust, and compact, the spring balance can be used in various fields...
Sensing force gauge : UT DM
This small sensing force gauge is an essential tool for all laboratories, design offices, workshops, after-sales departments, etc.
|
|
| ALTAIR LI is an advanced system which use an infrared focal plane array professional camera, capable of producing non contact stress images of structures and materials under cyclic loading. ALTAIR LI uses the thermoelasticity principle together with an highly sensitive infrared focal plane array camera and state of the art digital processing electronics. |
|
| The OBR 4400 takes the industry's first ultra-high resolution OTDR with backscatter-level sensitivity designed for component- and module-level reflectometry to the next level. With a small, easily transportable platform, the capability to "see" reflections out to 2 kilometers with no dead zone, and integrated temperature and strain sensing, the OBR 4400 gives you the ultimate in fiber diagnostics. The OBR 4400 uses swept-wavelength coherent interferometry to measure minute reflections (< 0.0003 parts per billion) in an optical system as a function of length with spatial resolution less than 50 microns. This provides the user with precision reflectometry and unprecedented optical-module inspection and diagnostic capabilities by providing the ability to locate and troubleshoot splices, suppliers of connectors, fiber bends and breaks, insertion loss points, track polarization, verify PM components and more. |
|
|
|
Force measurement instruments, Torque measurement instruments
