|
|
Microprocessor based Data Logger model DATALOG-16
Product Description:
In a process industries, where "n" number of parameters are required to be monitored and recorded, for various reasons, the data logger featured here is most ideal. Using single data logger it is possible to monitor and log the temperature or process values sensed through thermocouple or RTD(Pt-100) or other process variables, of maximum 16 different points. One or more data loggers can be combined for monitoring more than 16 channels. The measured analog values are also stored in the internal non-volatile memory along with the real time and date. The stored datas can be down loaded to the dot matrix printer using the built in parallel port and/or on to the computer using the built in serial port on RS485 link. Alarm facility is provided by common high and low relays and 32 dc drivers for high and low alarms per channel. External relay cards can be operated using this driver signals.
Supporting window based data acquisition software allows user to monitor the on-line or off-line datas in the graphical or tabular form on the screen. The high and low alarm levels are also programmable for each channel.
PLEASE CHECK MORE DETAILS IN CATALOGUE SECTION
http://pdf.directindustry.com/pdf/libratherm-instruments/data-logger-for-temperature-humidity-etc/28920-29606.html |
|
CF-1200 is a palm size FFT analyzer ideal for measuring vibration and sound in the field.
Since it is compact, easy to carry and battery powered, you can use it anywhere.
Having functions as FFT, waveform monitor and data collector, the analyzer is useful for diagnosing rotary machines and inspecting products. A memory card enables large amounts of data to be stored, which can be transferred to a personal computer and controlled with high accuracy.
Features :
- Compact, portable, battery-powered FFT.
- Large capacity data storage with memory card
- Liquid crystal display with backlight |
|
| With more than one million BARTON DPU-based instruments in service around the world today, Cameron's Measurement Systems division is a premier supplier of reliable and accurate chart recorders, indicators, switches and pneumatic controllers. Originally developed in the early 1920s, our differential pressure technology features a welded bellows assembly that increases accuracy while dramatically reducing the effects of wear. To facilitate quick and easy repairs all DPU based instruments are supported with pre-calibrated exchange or repaired sub-module bellows assemblies. |
|
Temperature Control with the data logger "Penguin"
- available in two variations
for temperature (16.000 measuring values)
for temperature and humidity (32.000 measuring values)
- Measuring range temperature: -40°C to 80°C
- Measuing range humidity: 0 to 100% RH
- High accuracy
- Infrared Interface
- Easy Programming
- Various programming possibilities
Just have alook at our Online-Shop:
www.temperature-shop.eu
Here you will also find information about our further data loggers and product range all around the temperature measurement:
- Temperature Sensors
- Temperature Humidity Sensors
- Thermocouple Connectors
- Temperature Measurement Instruments
- Digital-Thermometer
- Infrared Thermometer
- Data logger
- Recorders
- stationary Pyrometers
- Controllers
- Indicators
- Transmitters |
|
HUMLOG 10
Data logger for humidity and temperature
HUMLOG 10 series humidity/temperature data loggers permit the exact and professional recording of humidity and temperature values. Low power consumption and large memory size enable long-term data capture for a wide range of applications.
HUMLOG 10 / HUMLOG 10TSE:
The elegant 2-part housing, which consists of a display module and a plug-in sensor module, enables easy installation and a fast exchange of the sensor unit when service is required.
The current measurement data on the large display is easy to read even from a distance of several metres.
HUMLOG 10THC:
The compact HUMLOG 10THC version does not have a display and is equipped with internal H/T sensors.
Measurement Data - Evaluation & Configuration:
Measurement data evaluation and instrument configuration can be conveniently performed via the serial RS232 interface with a PC or notebook computer by means of the Smartgraph TM 2 software, which runs under MS Windows TM.
Smartgraph TM 2 can display the recorded measurement data in graphical form or as a table. The layout of the display can be individually configured by the user. |
|
UR C30 Controller System
Digital Controller for Bay Control and Substation Automation
Protection and Control:
User-definable protection functions
Programmable logic, timers, counters
Distributed logic, remote I/O expansion
Up to 96 digital input and 64 digital outputs)
Transducer I/Os (RTD, dcmA)
Monitoring and Metering:
Oscillography - 64 samples/cycle, up to 64 records
Event Recorder - 1024 time tagged events, 1 microsecond
resolution
DataLogger - Up to 16 channels with user selectable
sampling rate:
User Interface and Programming
Front panel display and keypad for local access; RS232 port for local PC access
User programmable local display, LEDs and pushbuttons
Customize protection and control functions with FlexLogic,
FlexCurves, and FlexElements:
Includes EnerVista LaunchPad - Simplified relay setup and programming
Multi-language - French, Chinese, Russian option
Communications:
Networking options - Ethernet-fiber (optional redundancy), RS422, RS485, G.703, C37.94
Multiple protocols - IEC 61850, UCA 2.0, DNP 3.0, Modbus, IEC-104, Ethernet Global Data (EGD)
Direct I/O - exchange of binary data between URs |
|
With or without display, compatible with extreme temperatures (very high and very low), the new range of KISTOCK dataloggers lets you monitor (continuously or on-demand) your manufacturing process, storage premises, transport chain...
With these new accurate and self-contained dataloggers, you can store from 16,000 to 100,000 measurement points (temperature, humidity, light, current and voltage); they are compatible with external probes (up to 4):
- humidity-temperature (thermocouple K-J-T, Pt100),
- ammeter clamps,
- 4-20mA and 0-10V
When connected to the USB port of your PC and when configured in ONLINE mode, the KISTOCK becomes an acquisition system, allowing you to measure 5 parameters simultaneously, in real-time.
KILOG work on batteries, which can be replaced when required. You can configure the working mode, display mode, LED status, recording duration…
One click and you can quickly download data (1000 points per second) from your KISTOCK (or from the Data Recorder). Once the data have been automatically saved, you can process data with clear and accurate tables and graphs |
|
ShockWatch temperature recorders give you the ability to monitor and record temperature and humidity to ensure acceptable environmental conditions for your sensitive goods.
The DataScribe RH52s device monitors and records temperature and humidity through a linear dual channel. Its small size and built-in sensors allow it to go where no other logger can, which enables it to be easily concealed for added security. Despite the small size, this device is accurate, reliable, and has a large memory capacity. Accuracy is an impressive +/- 1 degree F and +/- 3% RH guaranteed. The quality of the RH sensor is unaffected by condensation, immune to most reagent vapors, has a fast response time, and has excellent long-term stability. The large memory and long battery life make this device ideal for remote applications. It records up to 16 months of hourly readings in protected memory, ensuring that you don't lose your data if the battery is removed.
|
|
%RH, °C, °C td extern °C
•Long-term drift-free humidity sensor with fast reaction time
•Memory up to 48,000 measurement values
•Checking and calibration possibility with calibration set
•Protective cap for contaminated air or corrosive gases |
|
Can also be used without the radio function
-Evaluation of communication either via radio or by means
of a logger at the PC
-Usable range of the radio connection: max. 350 m in the
open air, and max. 75 m indoors
-Data transmission of up to 200 loggers simultaneously onto
the screen
-All data is automatically stored on the PC in an Excel file
-Alternatively, stored data can be transmitted
conventionally directly at the PC via a logger interface or
IrDA (infra-red)
-All loggers have a 3-digit LCD display for the currently
measured values
-Up to 16,000 measured values can be stored in the logger
-Sampling rate: between every 10 seconds and every 2 hours
(variable)
-Storage capacity between 40 days and 3 years
-Internal temperature and moisture sensor
-Variable hi/low limit alarm (with visual warning)
-Min/max value indication according to hours or days
-Each logger has its own ID number
-Radio module with acoustic and LED alarm and hi/low alarm
contact 30V/2A
-The external sensor can also be connected directly to the
radio module
-Replaceable battery (battery life approx. 2 years) |
|
MCC has announced the addition of two battery powered temperature dataloggers to its growing datalogger line. These battery powered dataloggers are offered in two models: the USB-501 for remote temperature logging, and the USB-502 for remote temperature and relative humidity logging. These products are the perfect, cost-effective solution for long or short-term data logging applications. Both the USB-501 and USB-502 log up to 16,382 temperature measurements in the -35 to +80 ºC (-31 to +176 ºF) range. The USB-502 additionally supports up to 16,382 additional relative humidity measurements over the full 0 to 100 percent range. Rates for both dataloggers can be set from 10-second to 12-hour intervals. The loggers plug directly into a standard PC or laptop USB port for setup and data download. The included USB-500 Series Data Logging Application software supports both products. This user-friendly, intuitive software is used initially to configure the loggers, program alarm thresholds, logging rates, start times, and measurement units. When the loggers are retrieved from the field, the software provides simple one-click access to download, display, and export the data.
With the included USB-500 Data Logging Application software, the user can display time-stamped temperature, relative humidity, dew point, and alarm limits on a powerful strip chart graph. The data can also be downloaded to a text or a .csv (comma separator values) file. Supporting these file types allows users to easily export the logged data to Excel. With one mouse click, spreadsheets and reports are easily generated. The software and USB-500 series dataloggers are compatible with Windows 2000/XP. |
|
Precise measurement and control of Humidity (%RH) and Temperature is essential in the pharma, food, chemical and other industries. The models featured here suits various applications of simultaneous measurement and control of %RH and Temperature. Indicators are available for simultaneous display of temperature and %RH on 0.5%u201D to 4%u201D large displays. PID controls are available for maintaining %RH and Temperature in the stability chambers, Walk in chambers, dryers etc%u2026 Eight and Sixteen channel Data loggers with suitable sensors and transmitters are available for validation of chambers, storage rooms etc%u2026 Small models are also available for monitoring of %RH and Temp. in server rooms, clean room storage, hot air driers etc%u2026 All models are available with serial interface for communicating with computer. 21 CFR part 11 compliant software is also provided as per FDA regulations.
APPLICATIONS
For BOD, Environmental/ Walk-in test chamber, HVAC applications and for validation purpose
|
|
The TopLab device is designed for changing applications in laboratories and in R & D.
External devices (e.g. weighing machines, modems, large displays) can be connected to Message devices via serial ports. Communication is via Modbus (LAN). Communication via Profibus DP is also available.
Configuration of TopLab devices takes place via the user friendly "BusManager" PC software. Configuration data is transmitted to the device and securely stored there. Configuration data can be amended and adapted during operational run time.
Typical applications for TopLab devices are the acquisition of measurement and process data, as a data logger for universal measurement values, remote monitoring of decentralized plant and machinery, test bench and laboratory automation. |
|
With the new portable solution from KARL STORZ, you will be able to perform off line inspections. The results of the inspections can be converted into image and film format as well as documented.
The KARL STORZ PORTABLE PACK Set is consisting of:
Basis Unit, PAL
Battery
Battery Charger
Carrying Strap
Soft carrying bag
Compact-Flash Card 128MB
Card Reader |
|
Eagle is a new data acquisition system designed to provide a world-class rack-mounted solution for medium channel-count dynamic data recording, and real-time monitoring requirements. Eagle is particularly suited to applications close to the test article with a rugged 19" rack-mount chassis.
Eagle may be operated in a standalone mode as a mobile acquisition system (with screen & keyboard fitted) or as part of a larger remotely-controlled acquisition system.
Eagle features 32 analogue input channels.
- 24-bit delta-sigma A-to-D converter per channel
- Synchronous sample rates 5-200 kHz (up to 80kHz bandwidth)
- All inputs are configurable for AC, DC, ICP or Tachometer signals
- Each channel includes selectable ranges up to +/-1, 2, 5 or 10 volts
- Synclink interface to allow multi-unit operation
- < 5kg weight |
|
Personal Daq/50 Series
USB Data Acquisition Modules
– Models /54, /55, /56
Designed for high accuracy and resolution, the 22-bit Personal Daq data acquisition systems directly measure multiple channels of voltage, thermocouples, pulse, frequency, and digital I/O. Multifunction data acquisition modules attach to PCs via Universal Serial Bus (USB 1.0 and 2.0 compatible).
Key Highlights
• Multifunction data acquisition modules attach to PCs via Universal Serial Bus (USB 1.0 & 2.0 compatible)
• Ultra low-power design requires no external power or batteries
• Can be located up to 5 meters (16.4 feet) from the PC
• High-resolution, 22-bit A/D converter offers reading rates from 1 to 80 Hz
• Built-in cold-junction compensation for direct thermocouple measurements
• Frequency/pulse, or duty-cycle measurements up to 1 MHz*
• Convenient removable screw-terminal signal connections
• 500V optical isolation from PC for safe and noise-free measurements
• Programmable inputs from ±31 mV to ±20V full scale
• Digital I/O lines with open collector output for direct drive applications*
• Expandable up to 80 channels of analog and digital I/O*
• Up to 100 Personal Daq modules can be attached to one PC using USB hubs, for a total capacity of 8,000 channels
• Digital calibration — no potentiometers or adjustments required |
|
The HPM420 Series readouts and associated pressure, temperature and flow sensors provide an accurate, economical and user friendly solution for servicing and commissioning hydraulic systems and components. The HPM420 readouts have two inputs which recognise which pressure, temperature or flow sensors are connected and automatically sets the correct calibration to each input for the type of sensor being used.
The HPM440/460 is ideal for use as an in-house or portable display and data logging instrument.
Powered by a 9 Volt rechargeable battery, this easy to use diagnostic test system is a valuable tool for preventive maintenance, verifying component settings, pin-pointing poor system performance, measuring differential pressure and capturing harmful pressure spikes. |
|
DIRIS has been developed by Socomec over the last 10 years. It is a complete system for the operation of low and high voltage electrical networks and offers measurement and monitoring of electrical values, energy metering and management (electricity, water and gas), command and remote control of equipment and network protection.
3 new, highly-innovative products are being added to this range: the DIRIS A20, A40 and A41
Application:
All industrial or commercial LV/HV electrical installations
Original features and advantages:
The DIRIS A products meet all the requirements of installers and users:
- Easy to fit (compact casing, plug-in terminal blocks)
- Extremely accurate with high quality measurements using an ASIC component developed by Socomec
- Optimum readability with backlit, high-resolution LCD display
- Direct access to data via 4 or 6 large keys
- Board can be upgraded with additional modules (communication, harmonics, alarms) providing long-term value for your investment |
|
It is dotting style of 6 - channel chart recorder, universal input, low cost, short depth 150mm, light weight 1.5 kgs and IP65 water-resistance.
FEATURES
- 6-channel dotting
- Short depth in 150mm
- Weight 1.5kg only
- Dust-proof.IP-65 Water-resistance
- Standard RS-232 Communication interface
- Universal input and range
- UL, CSA, CE approved |
|
The use of the ink jet printing technology makes of the industrial Microjet recorder an unique and revolutionary device at present on the market. The silicon chip, already used in the manufacture of FCX transmitters, has been used by Fuji Electric in the design of this new printing system. The industrial recorders PHE, PHC (100 mm) and PHA (180 mm) allow continuous recording of 1, 2, 3, 6, 12 or 24 channels in 6 colours with an unprecedented quality and speed. Thanks to the small number of moving parts, this new technology reduces in a important way the number and the cost of the various maintenance operations, which were necessary for the traditional pen printing.
The ink jet head is based on a silicon chip. In printing mode, it is not in contact with the paper; this avoids any friction and allows a stable and accurate recording.
|
|
It is the world first paperless recorder of the same size in highest resolution 640x480 pixels VGA TFT display, infrared detector, maximum 18 channels, plug & play I/O cards. It has many other unique features too, 12 soft keys for easy operation, universal input, the shortest depth 174mm, well designed portable handle, fully isolated channels, reliable and high capacity storage media CF card
FEATURES:
- 6.4"Color TFT LCD with 640X480 pixels resolution
- The Maximum Channels :
- 18 isolated analog input channels
- Plug & Play Supported I / O card, 6 Slots
- The High Flexibility :
- User configurable l / O card
- Expandable modular architecture
- Flexible screen configuration
- User-Friendly
- Soft keys coupled with interactive dialog simplify
- setup & operation procedures
- Easy - to - access function keys
- Infrared Detector:
- Shut off LCD automatically to prolong LCD life
- and save power while nobody near by
- Save Space:
- Only 174 mm (6.9") depth behind panel
- Various Display Formats:
- Vertical trend , Horizontal trend,
- Bar Graph, Numerical or mixed
- Save Data in Flash ROM,
- Compact Flash Card or PC
- Communication :
- Standard Ethernet and optional RS-232 / 422 / 485
- The Highest Accuracy
- 18 - bit A -D analog input, 15-bit D-A analog output.
- Fast Sampling Rate:
- Within 200 msec for all channels,
- Programmable Filter or Moving Average Sampling Method
- Statistics with Instant , Average , Min./ Max. Values
- Progammable Alarms and Messages available
- Portable / Bench Top Assembly Kit available
Available in low cost 6 channels |
|
KR2000 Series are network-compatible graphic recorders with high performance and high operating function employed high visibility 5.6"TFT color LCD display. High speed of sampling rate 100ms for 12 points and high accuracy of ±0.1% were realized, and measured data is stored into internal memory and maximum 2GB compact flash card. As it can be monitored by a web browser display on several computers on intranet or internet, FTP transfer of data file and E-mail notification are also available.
The recorder can be used for various applications such as data management, research, development, remote and wide range monitoring by utilizing internet environment. |
|
For the display and the record of process data, Fuji Electric offers a complete range of recorders: traditional paper chart recorders (continues or dot recording), paperless recorders and remote I/O modules with PC chart recorder software.
Simple applications but also more complex with alphanumeric messages, totalize and math functions, digital I/O are possible with one recorder of Fuji Electric.
|
|
Example:
-JUMO LOGOSCREEN 500 cf Entry-level Paperless Recorder with CompactFlash card and life-cycle data management (70.6510)
Measurement data presented numerically as vertical diagrams (with scaling,
numerical display, or as a bar graph)
Presentation of event traces such as "Binary inputs"
On-site availability of measurements in the FLASH memory
Measurement data are retained, even after a power interruption
Saving of data sets on the CompactFlash card
Instrument configuration through the keys or the setup program(CompactFlash card or interface)
Evaluation of archived data with PC evaluation program
Search function for history analysis
Adaptation of the memory cycles to the specific process, using normal,
time-of-day and event operation
Freely configurable inputs
Internal sampling rate 250msec for 3 or 6 analog inputs, minimum storage cycle 1sec
Counters and integrators (6 channels)
Math and logic module (6 channels)
integrated web server
The appearance of the LOGOSCREEN 500 cf is dominated by a 5-inch color display, in which the measurement data can be displayed in a vertical direction, similar to ordinary chart recorders. But unlike ordinary recorders, the LOGOSCREEN 500 cf does not need any chart paper for recording. Measurement data are stored electronically, and are available for evaluation on the spot as well as in the PC.
The integrated life-cycle data management ensures fast traceability of process data referred to specific installations.
... |
|
The new DataChart 1250 paperless recorder features 2 user configurable inputs for measuring DC voltage, current, thermocouples, RTD’s and frequency/RPM inputs.
Four internal alarm set points can be programmed to activate the 2 SPDT relay outputs. Data is displayed in real time graphic or digital format on a bright LCD display with LED backlight. Data is stored on CompactFlashTM cards up to 2 Gig in size. Data can be reviewed, printed and exported using the optional Navigator software for Windows. Data can be stored at up to 100 samples per second for both channels. Power is supplied via A/C wall transformer or via optional internal rechargeable NiMH battery pack. |
|
|
|
Recorders, Data acquisition
