|
|
Pressure range up to 1250 bar / 18,000 psi
Suitable for Air, Nitrogen, Argon, Industrial helium and a wide range of other gases
Provided with Resato air-driven single acting, double acting or two-stage gas booster
Water-cooled Oxygen boosters available
All stainless steel construction |
|
Pressure range up to 3650 bar / 50,000 psi
Flow up to 50 L/min
Suitable for water, oil, and a wide range of chemicals
Provided with reliable Resato air-driven pump
Low noise level even at high cycling speed
All stainless steel construction |
|
| These standard systems are made of stainless steel and have a working pressure up to 2400 bar and a flow capacity from 0 to 37 ltr/min. They are compact, easy to handle and ready for use. These systems are often used for pressurising vessles, tubes, professional fittings, fire extinguishers, hoses and cocks. |
|
EMC PROFESSIONAL ANTENNAS FOR TESTING UP TO 40 GHz
Biconical - Log Periodic - Horn - Dipole - Monopole - Loop antennae.
Com-Power EMI / EMC broadband and tuned antennas cover the frequency range of 9 kHz - 40 GHz for EMI/EMCTesting. They can be used for both radiated emission and immunity testing (antenna used as a professional transmitter to generate electromagnetic field).These antenna were intended for use in an EMI/ EMC testing laboratory to test electronic products to certify that they meet the various international EMC regulatory standards. However, they are also suitable for troubleshooting EMI problems by the product manufacturer before going to test EMC. |
|
| The AM-400 professional antenna mast is suitable for making EMC measurements in an Open Area Test Site or manufacturers of test chambers. It can vary the antenna height from 1-4 meters during measurement as required by commercial EMC test specifications. |
|
Model TWR95 (standard), Model TWR99 (compact):
- 1-4 meter antenna height standard, 6 meter optional
- Electric height adjust
- 1 cm height resolution
- Low-stretch polyester rope suspension (750 pound breaking strength)
- Pneumatic polarization standard
- Safety brake
- Zero maintenance
- Absolutely no conductive material above motor box
- Fiber optic interface standard
- Extremely low emissions
- Height and polarization switches located at tower
- Molded, one-piece foot and trolley
- Strong, stable construction
- Easy assembly
- Small footprint ideal for compact chambers (TWR99)
- Reduced height for low ceilings (TWR99)
Model TLT2:
- Variable speed with soft start and stop.
- New trolley guide concept enhances azimuthal stability.
- Dual load carriers give rigid, stable elevation under heaviest loads.
- Stable boom extension allows proper focal point placement for any size antenna without moving tower.
- Monolithic construction of major components results in unbreakable, lifetime utility.
- Absence of conductive material above the motor box minimizes the electro-magnetic cross section, and minimizes coupling to professional antennas.
- Materials are selected for resistance to UV radiation and resistance to water absorption.
- Standard model is operated by a single, standard controller channel.
- Developed for indoor and outdoor use. |
|
| It is a universal industrial testing machine capable of carrying out tensile, compression, bending, and shearing fesfs. Operation is manual, semiautomatic, and automatic. The test instrument can be modularised taking into account that the structure can house 3 permanently installed supplier of load cells for compression tests, and 3 sets of tensile grips for tests, including at break. Our system uses several cards (for axis and cell reader control) that are connected via CanBus to enable displacements to position or force at a feedback speed of 1000 Hz. Load cell reads are effected ì,000 times per second. Minimum indexing is 1/32,700 (this can be increased by slowing down load cell reading). |
|
Spring tension-compression machine
Product info:They are used for tension-compression, torsion, fatigue, sorting and strength testing...
Spring Fatigue Industrial testing machine
Product info:They are used for tension-compression, torsion, fatigue, sorting and strength testing...
Spring Torsion Testing Machine
Product info:They are used for tension-compression, torsion, fatigue, sorting and strength testing...
Spring Sorting Testing Machine
Product info:They are used for tension-compression, torsion, fatigue, sorting and strength testing...
|
|
SPRINGTEST 3
Automatic professional tester
With its CENTOR Dual force gauge, fixed plate and adjustable plate, this unit can be used to test high-capacity tension and compression springs. The command automatically determines the origin of the displacements and then stops the machine at a predetermined flexion value to measure the height under load. It is also possible to measure flexion, and cycles can be programmed.The instrument has an RS232 to store the results on a computer. Additional sensors are available to provide high levels of precision for springs with low force levels. |
|
We manufacture gearboxes for application to test stands for the aeronautical, car and space industry:
- RUN-IN TEST STANDS
- TEST STANDS for helicopter rotors
- TEST STANDS for the homologation of components
- TEST STANDS FOR THE test to duration and resistance to fatigue of components
- TEST STANDS for the verification of the efficient of transmissions
|
|
It’s not only in the aerospace industry that test professional cylinder and servo cylinder made by Hänchen are successfully used in highly demanding, decisive situations. Test and inspection facilities are nowadays an integral part of the industrial production process. The typical applications of Hänchen test cylinders include establishing the mobile safety of vehicles, the operational reliability of machines or the functional integrity of individual products and much more.
Synchronous cylinder for applications up to 25 Hz, 1 mm stroke steps. With integrated magnetostrictive or inductive position transducer system. Max. piston speed up to 1 m/s.
Synchronous cylinder for applications even above 25 Hz up to 800 Hz. Test forces from 4 to 600 kN, pressure range up to 320 bar. Fixed strokes 100, 150, 200 and 250 mm. With integrated inductive position transducer system. Max. piston speed 6 m/s in process.
Other products of the range of services:
- Clamping devices for piston rods (Ratio-Clamp®)
- Manufacturer of hydraulic cylinders
- Complete system solutions (Ratio-Drive®)
- Pressure intensifiers
- Industrial shock absorbers
- Special cylinders of all kinds
- Mounting parts |
|
Who calibrated? What? When? What were the results? Plan, manage and document all your calibrations efficiently and safely by using Beamex's calibration professional software. In a Beamex calibration system the calibrator communicates seamlessly with calibration software.
Benefit from using Beamex calibration software:
* Easy-to-use, modern software
* Traceable and auditable calibration documents
* Paperless documentation
* Seamless communication with documenting professional calibrators
* Wide customization possibilities
* Extensive installation, training and after-sales services
|
|
Recently Scandura has widened its range of products, developing a solution that enables the customer to develop its customised calibration & test stand: SMCS, “Scandura Modular Calibration Solution”, its a bundle of solutions for the calibration of pneumatic, electro-pneumatic and electronic process instrumentation.
Customers can build up their solutions according to their requirements, choosing among more than forty modules developed to:
measure and generate pressure, vacuum, temperature and electrical signals,
provide power supply units and auxiliary services.
Build up your customised calibration & test bench directly on our website!
|
|
Compact Spin Stands
High rigidity vacuum lockdown
Thermally stable design
10 nm AEM
30,000 RPM
Ultra low EMI linear design
Compact design |
|
Pressure range up to 10,000 bar / 150,000 psi
Standard with fully automatic test cycle control
Easy and user-friendly operation with Resato professional hose test professional software with "Test job manager"
15" touch panel
Quick serial testing through preset test pressure
Spacious test compartment; use of (Euro)pallet is possible
Each pump range is supplied with an electronic industrial pressure transmitter for accurate measurement
Option: burst test box
Option: length measurement
Option: twisting measurement
Option: volumetric expansion measurement
|
|
The experience gained during several years in planning and achievement of industrial test systems allows us to offer a complete range of applications for the most different needs of testing in the engine sector, especially for car traction, public transport, military resources, tramline and railway traction, marine engines, without ignoring the most recent requests in the area of electric and hybrid traction.
The sectors served are traditionally those connected to research and development, maintenance and production. |
|
The analysis of mechanical and electrical features, of the thermal evaluation, overload capacity and technical data of electrical machines, which the most important are efficiency and performance factor, today makes heavy demands on operability and flexibility of a professional test system.
The scope of services comprises mechanical components such as drive-industrial test set professional ups with torque sensors, small test stands with torque-speed measurement and manual or external control, as well as computer controlled complete solutions for the analysis and documentation of electrical machines.
Computer-controlled test stands can be realized with up to 6-channel current-/voltage measurement, so that a separate efficiency specification of motor and industrial converter can be effected even for converter-fed drive systems.
Special features:
Modular conception
Most modern techniques
Use of active brakes (4-Q-operation)
Rotating torque transducer 0,1 % accuracy and speeds up to 50000 rpm
Extremely precise power analyser
Standard- and customer-specific software
Optimal project handling
Worldwide after-sales service |
|
The experience gained during several years in planning and achievement of industrial test systems allows us to offer a complete range of applications for the most different needs of testing in the engine sector, especially for car traction, public transport, military resources, tramline and railway traction, marine engines, without ignoring the most recent requests in the area of electric and hybrid traction.
The sectors served are traditionally those connected to research and development, maintenance and production. |
|
For the utmost convenience, the Micro Dyne is packaged as a COMPLETE MOTOR TESTING SYSTEM. Everything that is needed to accurately and efficiently test miniature motors and mini motors is included with the purchase of a Magtrol Micro Dyne. The only component that needs to be supplied by the customer is a laptop or desktop personal computer and a motor power metering.
Applications
Magtrol motor industrial test systems can be found in test labs, at inspection stations, and on the manufacturing floors of most of the world's leading motor manufacturers. The Micro Dyne system is used exclusively for closed-loop testing of miniature motors and micro motors used in low-torque/high-speed applications.
Features
Designed SPECIFICALLY for miniature and micro motors
Torque: Easily convertible from 2.0 mN·m to 4.0 mN·m (0.28 oz·in to 0.57 oz·in)
Speed: up to 100,000 rpm
Power: 4 W
Low inertia
|
|
| The MEDUSA Series Supplier of fuel cell Test Stations are designed, engineered, and built by engineers and technicians that have been designing and manufacturing reliable electrochemical hydrogen systems for over 35 years. Teledyne's experience is unsurpassed resulting in the most precise, user friendly, and reliable Fuel Cell Test Stations available. Test stations are available in 3 model series -- the MEDUSA RD Series Stations for applications up to 3 kW, the MEDUSA RD Elite Series for applications up to 4 kW and the LS Series Stations for multiple kilowatt fuel cell stack testing applications up to 12 kW. |
|
Expertise and creativity ensure a constantly optimised portfolio. A newly developed humidification system with integrated moisture measurement allows for the dynamic operation of the test stand and is particularly suitable for small gas flow. Portable test stands permit additional flexibility in use. Test stands with electrochemical professional workstation are available with integrated impedance spectrometer manufacturers. Self-contained systems for switched mode power supply with fuel accumulators have already been provided. A complete vehicle model (CarSim®) with fuel cell drive is optimally suited as development tool for simulations or for HIL link-up. Furthermore MAGNUM can be characterised by its all-around services for fuel cells including amongst others conception and programming of controls for fuel cells or the carrying out of safety analysis.
|
|
Industrial testing machine, setting a new world standard
for CNC-controlled roll testing of spiral
and hypoid bevel gear sets. In addition
to basic pattern checking, this
production-oriented machine provides
SFT (single flank encoder-based motion
transmission error) testing and SBN
(structure-borne noise) testing
capabilities for soft and hard parts. |
|
• High rigidity vacuum lockdown
• Low AEM suppliers of spindle
• Thermally stable design
• Production proven design
• High throughput for off-track testing
• Patented design |
|
STATIC PRESSURE: 2000 bar
IMPULSE PRESSURE: 2000 bar
PRESSURE CONTROL: semi-autom.
TEST: semi-autom.
GRAPHIC PROFESSIONAL PRINTER: OPTIONAL
TYPE OF DRIVE: pneumo-hydraulic pump
TEST MEDIUM: oil
N° MANIFOLDS: 2
N° MANIFOLD CONNECTIONS: 15x1/4" BSP
SLIDING MANIFOLDS: included
PRE-FILLING: semi-autom.
SAE CONNECTIONS: OPTIONAL
PRE-FILLING FLOW: 25 L/min
PROFESSIONAL HOSE EMPTYING SYSTEM: semi-autom.
PRESSURE DISCHARGE: autom.
PRESSURE GAUGE SUPPLIERS: digit.
PEAK PRESSURE MEMORY: included
CYCLES/MINUTE: 2 (Ø 3/16" L=2000 mm P=2000 bar)
... |
|
Pressure range up to 1790 bar / 26,000 psi
Direct water feed or built-in stainless steel reservoir
Flow up to 2.4 L/min
All stainless steel
Easy and safe manual operation
Safety cover automatically bleeds off pressure when opened
Ergonomic design
|
|
Test Standard:
ISO, SAE J, SAE ARP, API, DIN, EN,BS,ECE,GB,¡
Test object/Specimen:
Supplier of hydraulic hose, Brake professional hose, Aero hose, Rubber tubing,
Oil & Gas pipe, Industrial metal pipe, PVC pipe, Flex pipe
Test Types: 3 types
Hydrostatic Test & Burst Test; Impulse Test;
Volumetric Expansion Test
1) Hydrostatic Test & Burst Test:
Test media: water or oil
Test pressure: 0-300MPa(4 ports)
Test pressure precision: ¡Ü¡À0.5£¥F.S
Pressure control precision: ¡Ü¡À0.8£¥
Test Temp: up to 100¡æ
Temperature fluctuation: ¡À2¡æ
Diameter: ¡Ü6¡±
Length: ¡Ü4D
Driven method: compressed air driven
Driven air: 0.7-1.0MPa
Air consumption: Max.1.6NM3/Min
Control method: PC controlled, or manual controlled (W/ or W/O industrial recorder)
2) Impulse Test
ISO6083, ISO6082, ISO11425, SAEJ343, SAE100R, SAEJ1405
Test media: Hydraulic Oil
Test pressure: 0-70 MPa
Frequency: 0-1.25Hz
Test Temp: normal temperature or -40¡æ--150¡æ
Medium temperature: normal temperature or -40¡æ--150¡æ
Hose quantity: 2 - 6 professional pcs
Hose length: ¡Ü1500mm
Life time: ¡Ü100,000,0 times
Waveform: basic square wave, trapezoidal wave, triangle wave
Control method: PC controlled
3) Volumetric Expansion Test
Test media: water (normal temperature)
Test pressure: 0-40 MPa
Testing port: 1 port
Constant pressure range: 5£¥--100£¥
Constant Pressure precision: -1£¥¡«+1£¥
Pressurization speed rate: 0-200 MPa/min (adjustable)
Volumetric expansion precision: 0.01ml
Volumetric expansion volume:¡Ü0.04ml
Dimensions: 800mm¡Á500mm¡Á1800mm
Control method: PC controlled |
|
|
|
Testing rigs
