|
|
For tubes:
Exhaust
Iron work
Thin steel
Capacities: Ø: from 25 to 63,5 Misters.
Ray of maximum bending: 125 Misters.
Angle of maximum bending: 165°
Mini thickness:
Thickness minimum of the tubes to be curved according to the external diameters:
1,25 mm for: Ø 25 to 47,5 mm (1 " to 1 7/8 ").
1,50 mm for: Ø 50,8 mm to 57 mm (2 " to 2 1/4).
2,00 mm for: Ø 60 and 63,5 mm (2 3/8 " and 2 1/2 ").
Features:
Asynchronous motor 2200W - 50Hz, 230/400V
Three-phase current (to specify the voltage with the order).
Classify insulation IP44.
Obstruction: 1,10 X 0,60 Mr.
Height of work: 925 Misters.
|
|
| The horizontal bending presses have been specially designed for the execution of bends or shapes, single or multiple, for flat, square, round bars, tubes or various sections in iron, steel and light metals. They are indispensable in the carpenter's workshop where bending, straightening, punching works are carried out, as well as in factories where accurate production works are necessary. |
|
HYDRAULIC HORIZONTAL BENDING PRESSES
The bending presses, which SIMASV was the first to manufacture in 1957, are particularly distinguished by their flexibility and versatility.
User-friendly and easy to maintain, the Simasv presses can be fitted with countless tools, making them suitable for use within any firm whether of a mechanical or other nature. Even in medium-sized industry they are a valid alternative when machinery for large-scale production must necessarily make way for machinery with distinctly lower production costs.
Over forty years' experience in the sector allows us to offer a competitive product in constant renewal.
Thousands of units sold throughout the world and the availability of spare parts over a period of time greater than twenty years bears clear testimony to the remarkable quality and great lifespan of Simasv bending presses.
TYPE OF BENDING PRESSES
NORMAL SERIES
T.22 Scanja - This series consists of one model only, the T.22 Scanja press.
SUPER SERIES
T.40 SUPER - In designing this series of machines, the main consideration was operator requirements.
T.40 DIGIT - The programming of digitally controlled models is simple and functional and ensured via the electronic.
T.40 DIGIT 2 ASSI - The programming of digitally controlled models is simple and functional and ensured via the electronic.
S.330 T.70 - The bending press S.330 T.70 has a workbench in welded and stabilised steel, suitably shaped and dimensioned.
SM.330 T.100 - The bending press S.330 T.100 has a workbench in welded and stabilised steel, suitably shaped and dimensioned. |
|
synchronized machines includes numerical control.Dynamic menu page by page and auto-learning menu make easy its use. For the machines with more than 4 axes and with graphic version we set up the programmer Cybelec, bi or tridimensional, monochromatic or with colours.
Parallelism : bending accuracy is assured by two proportional valves controlled by CNC; they control the oil flow from the cylinders and from two optical linear transductors placed on the shoulders on the gap level. Such a system, which can control step by step the ram's position and parallelism errors due to the side depth throats, make it possible to obtain the maximum parallelism accuracy.
A large series of options improve the features of this machine.ontrol |
|
Machines operating by hydraulic parallelism through equilibration valves of our project since 30 years with valuable results. Options of several devices, back gauge and numerical control, improve the features of this machine.
Structure : it is made under rolled, welded and strengthened steel for ensuring the maximum rigidity.
Cylinders : at double acting, are made under steel, lapped and ground, are hardened with induction.
Working speed : - High approach speed - Adjustable and positioning slowing down speed in a specific point of ram stroke - High upward speed
Working cycles : single and automatic.
Ram : it is driven directly by two cylinders placed on the housings. Ram stroke is adjustable at both bottom and top dead centre. Parallelism : parallelism precision is got through balancing valves and hydraulic stop.
This guarantees a very good bending precision, since the structure has no torsion stress because machine is not equipped with torsion bar. |
|
| As long as 20 years ago, the 3-point bending technology represented a revolution, today the ultimate pressure reference bending technology sets new standards. |
|
| LVD leads the industry with one of the most comprehensive lines of press brakes. Choose from entry level machines in manual and CNC versions, multi-axis press brakes with LVD's unique Easy-Form® Laser adaptive forming system and the new an exclusive CADMAN® Touch PC based CNC control, to turnkey custom designs to meet special forming requirements. LVD press brakes simplify programming, eliminate trial bending, and provide accurate, repeatable results. |
|
CAPACITY RANGE
Bending tonnage : from 350 to 10000 kN
Bending length : from 1250 mm to 6100 mm
Special size press brakes in capacities other than the standard are also
available in our production.
MAIN FEATURES
- Downstroke bending beam on two cylinders which are fully supported in low-friction slideways.
- Rigidly welded, monoblock steel frame for minimum deflection under load.
- Full electronic synchronisation with a proportional valve technology
- Maximum bend accuracy and repeatability assured through constant monitoring and correction of beam parallelism by a CNC system.
- Stroke-depth measurement through high precision linear scales
- CNC-controlled ballscrew backgauge systems with AC or DC drives
- Compactly-wired electrical cabinet with ventilation
- All-European hydraulics and electrical / electronic components. |
|
Max.Pressure from 50 to 300 tons.
Bending length from mm 2100 to mm 4100.
Promecam type tooling.
Electrical equipment complete with PLC "PILZ" closed
security software.
Multicell barrier "SICK" and safety guards conforming to EC rules, from 2 to 8 axis NControl "ESA", "CYBELEC"
or "DELEM".
ON DEMAND: colour videographic CNC, manual cambering table or motorized CNC controlled table.
Other optional tooling and accessories for every bending request. |
|
EUROMAC bending machines are easy to operate and program, and the cost of production is surprisingly low. You can save any bending sequence to the machine's memory. No press brake should be without a complementary hydraulic bending machine from EUROMAC.
Available in 3 models:
DIGIBEND 160: pressure max. 16 ton, stroke max. 200 mm.
DIGIBEND 360 (with or without back-gauge): pressure max. 36 ton, stroke max. 250 mm.
DIGIBEND 720 (with or without back-gauge); pressure max. 72 ton, stroke max. 350 mm. |
|
Max.pressure from 20 to 300 tons.
Bending length from mm.1100 to mm.4100 Promecam type tooling.
Electrical equipment complete with PLC "PILZ" closed
security software.
Multicell barrier "SICK" and safety guards conforming to EC rules.
Depth backgauge with micrometric adjustment.
Front support arms.
ON DEMAND: motorized backgauge with readout by
single axis positioner, 2 or 3 axis NControl, manual cambering tale, other optional accessories for every bending request.
|
|
Our NC press-bra¬kes offer slide stopping precision of about 1/100th of a millimetre. To achieve such accuracy, we use high-definition sensors fit-ted on either side of the slide. Their reading head is mode integral with the lower table by means of a C.
A microprocessor analyses the data and contrats the servovalves on the basis of the computer output. The System makes I t possi¬ble to eliminate the main difficulties of ben-ding in the air by maintaining the parallel alignment of the slide and ensuring precise stopping whatever the resistance load. |
|
| The key feature of Schiavi press brakes is that they produce simple shapes and complex geometrical structures with the same degree of accuracy. Every model of Schiavi press brakes has developed a suitable system for parallel plate bending, a principle indispensable to guarantee a constant bending angle. |
|
CAPACITY RANGE
Bending tonnage : from 350 to 3000 kN
Bending length : from 1250 mm to 4100 mm
Special size press brakes in capacities other than the standard are
available in our production.
MAIN FEATURES
- Downstroke bending beam on two cylinders fully supported in low-friction slideways.
- Rigidly welded, monoblock steel frame for minimum deflection under load.
- Patented hydro-mechanical system which consists of the following elements to
warrant parallelism of the beam and a high repeat accuracy :
* a solid torsion bar linkage at the back of the machine.
* precision mechanical-stops built into each cylinder and integrated with one each other through a mechanical linkage and an electrical position controller.
* Special-design hydraulic manifold block
- High stroke and daylight values to accommodate tooling variety.
- Pressure switch and gauge to regulate bending tonnage easily, and to prevent overbending.
- Two-speed bending cycle giving fast approach, slow-bending and fast return.
- All-European hydraulics and electrical components. |
|
The ROBObend-Center integrates a folding machine with a robot. The innovative software integration design automatically programs the robot using the part program data. As in all folding technology, the blank remains in a horizontal plane during the entire folding cycle. The ROBObend-Center uses simplified material handling to be much more productive.
Mounted onto a linear axis, the robot gains additional work area. The robot directly feeds the material into the machine. Optical sensors measure the position of the part and sends feedback to the CNC so that the robot can instantly correct any inaccuracy. After the blank is parallel to the bend line, the "CNC freezes the robot". All six robot joints will be locked in position. This seventh axis now moves the robot forwards and back in order to bend flange-by-flange with perfect accuracy.
When the robot positions the blank, it is in an extremely stretched position. The ROBObend-Center therefore can run sheet sizes of up to 3000 x 1500 mm and can fold sheet thicknesses of up to 3 mm.
When the part needs to be flipped RAS uses an innovative method. Where re-gripping stations are usually needed, the ROBObend-Center robot can position the part to the bend line, holding it from either the top or bottom of the part.
|
|
Innovative horizontal presses, technologically unique, electronically programmable.
Version H1 provides the facility to work on flat bar stock, sheetmetal, round bar stock and other materials. In addition to the processing capabilities of version H1, version H2 offers the facility for multiple tube-end operations including tapering, tube end deformation, flaring, and reduction.
Typical applications: ideal for all types of forming, bending, and punching. In addition, version H2 can be used for the construction of greenhouse frames, truck exhaust pipes, work in the hydraulic sector, 37° flanging and other tube-end deformation work. |
|
With the new series of press brakes X-Basic Gasparini want purpose itself at a market target that don’t asks very high performance but don’t want renounce at elevated quality and technology.
Essentially the X-Basic series furnish the basic equipment for the bending with the most modern technology concept,support by precision of advanced technology.
STRONG POINT:
- PROPORTIONAL AUTOMATIC CROWNING DEVICE: The automatic proportional crowning device is entirely managed by numerical control; it goes into position automatically,in proportion to the plate that is being processed.
- REFLEX : New proportional frame deflection compensation system that allows making any bend with a constant angle, regardless the lenght of the work piece.
TECHNICAL PLUS:
- GREAT ACCURACY
- STURDINESS AND RELIABILITY
- HIGH PERFORMANCES
|
|
We created the models in the Montbard range in cooperation with our customers. Driven by the desire to always be the best, we work with our customers to design our products. This opens new directions to us for study and optimisation. A wide range of options enables every customer to find the machine to suit his needs. Simple or fitted with hi-tech equipment, double sided or C-frame. Standard presses all share features such as:
. Exemplary quality.
. A competitive price resulting from series production.
. Elegant styling and a fine level of finishing.
. For the operator, efficient user-friendly controls.
. For maintenance, a maximum of data at the workstation and above all a quantity of details facilitating understanding.
Construction common to the whole of the standard range:
. Flame cut welded steel plate frame, stress-relieved by annealing before machining.
. Strength optimisation by finite element stress analysis.
. Hydraulic unit mounted on an oil retention tank with a drain plug at the operator's height.
. Standardised cylinder seals.
. Top-of-stroke safety lock.
. Outer finish by sound insulating panels.
. 6? black and white control screen.
. Conformity with EC standards in force.
For double action presses:
. A removable bolster.
. A bottom cushion that can be removed from the top.
|
|
HFT, A NEW CHOICE IN THE MARKET OF HIGH QUALITY PRESS BRAKE
The HFT Press Brakes combine quality bending with ease of use. The range benefits from AMADA's vast experience in the Press Brake market and the technology of the deflection beam. The CD2005 NC control offers total control throughout the bending process.
|
|
X-PRESS PSG Press Brake
The new range of X-Press and PSG press brakes express the latest
developments in technology with the aim of responding, more effi ciently
than any other product, to the needs of quality, reliability and productivity
These goals have been achieved thanks to solid structure which can be
easily customized and completed with a wide range of accessories which
allow the maximum fl exibility of use.
X-PRESS Press Brakes
The new range of X-PRESS press brakes is the result of the company’s commitment to its product standard confi guration to market needs.This range is marked by wide strokes and daylights, descent and return speeds higher than average, reduced cycle time, highly accurate positioning and repeatability, consistent bending angle.
PSG Press Brakes
The range of PSG press brakes include models from
200 to 1000 tons and more. The oversized frame coupled with the special patented crowning and refl ex systems guaranteed high accuracy
and repeatability over time.
|
|
X Brake
TRUE FINN-POWER MACHINE VALUES
X-Brake presents FINN-POWER's entry level bending technology. Even though the machine is the most economic one in our wide product range it features all the fundamental basic values every FINN-POWER machine is famous of - Productivity. Innovation. Reliability.
X-Brake is a servo hydraulic synchronized CNC press brake controlled by Delem 65W. Ease of use and precision are key words to describe working with x-Brake.
X-Brake has been designed for demanding production work. The frame is a rigid welded construction with an additional frame for position measuring. Stress relief has been performed by vibration method. FEM calculated deflection of the upper beam is compensated by a reliable hydraulic crowning system.
High precision servo hydraulic controlled ram movement and robust back gauge solutions guarantee work piece quality day after day, year after year. |
|
4 controlled axes are standard:
y1 and y2 (depth stop)
x (rear stop)
R (height stop)
honed and chrome-plated hydraulic cylinder ensures maximum durability
controlled rear stop with recirculating ball screw
incl. manual WILA camber/crowning
standard male die camber/crowning
folding depth adjustable through CNC controlled servo valves
repeatability 0.0004” |
|
With unmatched acceleration/deceleration the Pullmatic 720 will revolutionize your fabrication capability. You can punch sheets up to 1500 x 3000 mm without reposition in 8 mm material. The punching force is 220 kN optional 300 kN, maximum table speed is 128 m/min and the maximum hit rate is 505 l/min on 25 mm centers, this is truly the fastest punching machine existing today.
Closed, Rigid Frame
The machine frame is of a portal design. Top and bottom frame members consist of two fully closed, all-welded, box beams. Together with two risers and two draw bolts, each with a pretension of 44 tons, they form a closed portal frame. The portal frame minimizes frame deflection, allowing greater precision in punching while substantially reducing tool wear and lowering the noise level. The portal frame also provides greater ability to absorb side loads, which is common in step punching and forming operations. |
|
Adira QHD press brakes, C type, present a remarkable step forward in relation to conventional press brakes.
The combination of two exclusive systems, resulting from simple ideas, allow for an excellent performance seen on the highly accurate bends and the better control of the bending angle:
CPS system in optimised combination with AF Wizard® allows for the teaching of the obtained angle by adjustment on the first bend.
As result of a thorough concept the precision and repeatability of the bending depth are excellent, independently of the bending length and temperature variation.
We recommend BL or LS versions equipped with protection by laser beams for increased productivity and maximum safety. |
|
Thanks to AddisonMckee's Powerbend range of CNC tube bending machines, manufacturers requiring standard three axis solutions can now
benefit from AddisonMckee’s world-leading reputation for quality,
precision and reliability at an exceptionally competitive price.
A high-performance draw bending range, designed for the accurate
and repeatable production of tubular components, the Powerbend
combines years of proven design techniques – with lower
manufacturing costs – to provide levels of accuracy, repeatability,
quick tool change and ease of operation as required by today’s
manufacturing industries.
"The AddisonMckee PB series of benders are, without a doubt, the best bending machines for the money on the market today. The control is the most stable and reliable I have ever worked with on a CNC hydraulic bender, while maintaining a very user friendly interface for the operator. I would encourage anyone considering a bending machine purchase to contact me directly, so I can extol the virtues of the PB."
Mike Baverstock
Engineering Manager
SOUTHERN TUBE FORM, LLC
Allen-Bradley Control Unit
Allen-Bradley Drives and Motors
Rexroth Hydraulics
Foot Pedal Cycle Start (Safe Load Procedure)
Recapture Software
Sequential Bend Software
Anticipated Mandrel Retraction
One Mandrel Rod
Safety Scanner and Barrier Rail
Operator Manual and Technical Manuals
CE Mark |
|
2 ROLLS BENDING MACHINE
This series consists of one model only, the CE2 with two driving rolls with a knurled surface. The machine structure is manufactured in stabilised steel, and the shafts are constructed from thermally treated NiCr steel fitted with ball-bearings to protect mechanical parts from wear, thus ensuring their long lifespan. .
The CE2 is fitted with a helical geared speed reducer, lubricated in oil-bath and is operated via the double pedal board to change the direction of rotation of the rolls.
This bending machine allows the bending not only of section bars, bars and tubes of different dimensions and materials, but also the curling of metal straps and the twisting of square iron up to 8 mm in thickness.
TYPE OF SIMASV BENDING MACHINES
TWO DRIVING ROLLS
CE2 - This series consists of one model only, the CE2 with two driving rolls with a knurled surface.
THREE DRIVING ROLLS
CHV.3360 - Consisting of a solid structure in stabilised steel, the CHV.3360 visualised bending machine is fitted.
CHV.3380 - Consisting of a solid structure in stabilised steel, the CHV.3380 visualised bending machine is fitted.
CHV.4100 - La curvatrice a tre rulli trascinatori CHV.4100 è costituita da una solida struttura in acciaio.
3 ROLLS PYRAMID
PHV.350 - HYDRAULIC PYRAMID BENDING MACHINES WITH THREE DRIVING ROLLSHydraulic Bending Machine with two stationary.
PHV.370 - HYDRAULIC PYRAMID BENDING MACHINES WITH THREE DRIVING ROLLSHydraulic Bending Machine with two stationary. |
|
|
