|
|
Model 4086AWG is a laboratory grade synthesized function generator with arbitrary capability. Direct digital synthesis (DDS) techniques are used to create stable, accurate output signals for all 27 built-in standard and complex (arbitrary) waveforms as well as custom arbitrary waveforms. The 4086AWG produces high purity, low distortion sine waves up to 80 MHz, square waves up to 40 MHz and provides extensive analog modulation capabilities including AM, FM, FSK, PSK, pulse modulation, burst mode and linear/logarithmic sweep combined with multiple trigger modes. The included intuitive Windows Software lets users create and edit custom arbitrary waveforms and download them with a single click to the instrument’s non volatile memory. Unmatched affordability and high performance make the 4086AWG a perfect fit for many applications in Electronic Test and Design, Sensor Simulation and Education and Training.
# Clean and stable output of very small signals down to the 1mV–10mV range (50 ohm)
# Support of internal and external modulation sources as well as internal, external and gated trigger sources
# Create arbitrary waveforms with 10 bit vertical resolution, 16k memory depth and a sample rate of 200 MHz
# Seamless import of waveforms from any Tektronix® TDS1000, TDS2000, TPS2000 and TDS3000 series digital storage oscilloscope. Easily recreate waveforms originating from the DSO’s display or internal memory.
# Fully programmable via the standard RS232 interface using SCPI compatible commands.
# 100 MHz Universal Counter with frequency measurement and totalize function |
|
Agilent function generator / arbitrary waveform generators give you 10 standard waveforms plus the ability to create arbitrary waveforms.
15, 20, 80 or 500 MHz bandwidth
1.25 GSa/s sample clock (N6030A)
Pulse generation with variable edge time (33220A, 33250A)
DDS technology
12, 14, 15-bit resolution
Built-in modulation capabilities
Free IntuiLink connectivity software
|
|
Aeroflex Cupertino specializes in producing digital broadband test and measurement solutions that are critical to the rollout of some of today's most promising and exciting wireless and satellite communication technologies. The company's data acquisition, playback and recording systems are fundamental tools used in the design, development and debug of a wide variety of advanced RF recording analysis and data generation requirements.
Our growing toolbox contains software, Signal Safari™ and hardware components designed for most advanced real world applications. Systems are available in standard configuration to meet most needs. The advanced capabilities of the instruments allow for easy configuration to meet custom solutions for the most demanding requirements. |
|
The 3020 Series includes compact 3U high precision PXI modular RF signal generators with an integrated dual-channel arbitrary waveform generator. Their functionality and performance are ideally matched to the needs of RF test systems for design verification and manufacturing up to 6 GHz. They provide RF output power control ranging from –120 dBm to +6 dBm with modulation bandwidths up to 90 MHz.
The versatile 3020 Series PXI RF Signal Generator modules are designed for use together with a low noise, highly agile local oscillator input from the 3010 Series RF Synthesizer module. The performance of the 3020 Series RF signal generators makes them ideal for generating the complex modulated signals for digital radio communications test applications as well as basic AM and FM modulation and CW applications. Their excellent level accuracy, repeatability and switching speed make them an ideal choice for high-volume automated production test. |
|
3410 Series Digital RF Signal Generators
An agile signal generator that combines wide frequency cover and high performance vector modulation in a small package, making it ideal for testing wireless communication systems and components.
- Wide frequency coverage:
-- 250 kHz to 2 GHz (3412)
-- 250 kHz to 3 GHz (3413)
-- 250 kHz to 4 GHz (3414)
-- 250 kHz to 6 GHz (3416)
- Fast RF frequency and level settling for high speed testing
- High performance vector modulation for improved component test
- Optional dual channel arbitrary waveform generator (ARB)
- Low adjacent channel power for receiver selectivity and amplifier linearity testing
- Fast GPIB response to maximize ATE system performance
- NEW! Optional List Mode for ultra-fast frequency and level hopping capability
- IQCreator® RF waveform creation software
- Wide bandwidth FM and AM modulation capability
- Optional high speed pulse modulation capability
- Compact, lightweight package
- Simple-to-use touch panel interface |
|
20MHz DDS Sweep Function Generator with Arb Function
The model 4045 is a must have for anyone needing a low cost, full featured direct digital synthesis (DDS) generator with a menu-driven front panel interface that includes a large, easy-to-read graphical LCD display. Waveform parameter changes and data entry can be made using the rotary knob or via the built-in RS-232C interfaces. The unit generates superb quality waveforms with high signal precision and stability. It provides sine & square wave outputs over the frequency range from 0.1 Hz to 20 MHz in one extended range (triangle/ramped wave outputs to 1MHz) Arbitrary waveforms can be edited from scratch or by modifying standard waveforms. A full range of triggering capabilities is available, including internal-external trigger source, gated and burst modes of operation.
# 20MHz Frequency Range (sine & square only)
# Sine, Square, Triangle & Arbitrary Waveforms
# Modulation in both AM & FM
# Lin or Log Sweep Function
# Adjustable Duty Cycle
# Adjustable DC Offset
# Bright Informative LCD
# RS-232C Interfac |
|
The model 4040DDS is a must have for anyone needing a low cost, full featured direct digital synthesis (DDS) generator with a menu-driven front panel interface that includes a large, easy-to-read graphical LCD display. Waveform parameter changes and data entry can be made using the front panel rotary knob. The unit generates superb quality waveforms with high signal precision and stability. It provides sine & square wave outputs over the frequency range from 0.1 Hz to 20 MHz in one extended range (triangle/ramped wave outputs to 2MHz). A full range of triggering capabilities is available, including internal-external trigger source and gated modes of operation.
# 20MHz Frequency Range (sine & square only)
# Sine, Square, & Triangle
# Modulation in both AM & FM
# Lin or Log Sweep Function
# Adjustable Duty Cycle
# Adjustable DC Offset
# Bright Informative LCD |
|
The B K Precision Model 4017B DDS Sweep/Function Generator is a versatile signal source which combines several functions into one unit including waveform generator, pulse generation (through variable symmetry), frequency sweep and frequency counter.
The heart of the function generator is a DDS based system that produces precision timing for sine, square, or triangle wave generation with frequencies between 0.01 Hz and 10 MHz. A continuously variable offset allows the output to be injected directly into circuits at the correct bias level.
The versatility and capabilities of the 4017B allows for a vast number of applications in both analog and digital electronics fields including Design Engineering, Manufacturing, Servicing and Education. The 4017B has the ability to output a wide range of frequencies that encompasses sub-audible, audio, ultrasonic, and RF applications.
# Features: 2x16 LCD Display area
# Clean output waveforms
# "Intelligent Encoder" frequency control knob
# Linear and log sweeps
# Output level displayed on the LCD
# CMOS/TTL Outputs
# Adjustable DC offset
# RS232 Interface
|
|
Model#4011A
MSRP $315.00 0.5 Hz to 5 MHz
Sine, Square, Triangle, Pulse, & Ramp output
Coarse and Fine tuning
4 digit LED display
Variable duty cycle
Variable DC offset
Variable amplitude output plus 20dB attenuator
20Vpp output into open circuit (10Vpp into 50 Ohms)
|
|
Agilent function generator / arbitrary waveform generators give you 10 standard waveforms plus the ability to create arbitrary waveforms.
15, 20, 80 or 500 MHz bandwidth
1.25 GSa/s sample clock (N6030A)
Pulse generation with variable edge time (33220A, 33250A)
DDS technology
12, 14, 15-bit resolution
Built-in modulation capabilities
Free IntuiLink connectivity software
|
|
Function Generator ( MODEL: FG15)
New FG15, 15MHz Function Generator can generator extremely clean and low
distortion waveform output . It comes with 90MHz TTL output , optional 2GHz
frequency counter etc . The unique design is to make the rotary menu driven
pop up and down functions for easy operation . Please refer to how pure the
waveform is as the attached files.
5MHz Function Generator ( MODEL: FG 52)
0.05Hz ~ 5MHz Function Generator
Linear/Log Sweep Function
Duty Cycle Control
Invert Function
Auto Range Auto Gatetime Counter
0.001Hz Counter Resolution
MODEL: FG 32 (6 Functions, 6 Ranges with counter)
1. Six waveform functions - Sine, Triangle, Square, Ramp +/- Pulse.
2. Frequency Range 0.5Hz ~ 3MHz
3. 5 digit autorange counter LED display
4. Internal/External counter function.
5. Linear/Log sweep. Sweep rate 10mS ~ 5S.
6. External counter trigger level control.
7. VCF input 0 ~ +/- 10V Voltrage control frequency to 1000:
8. Amplitude : 20V p-p (open);10V p-p (50 Ohm load). |
|
We develop our entire line of signal sources with excellent phase-noise characteristics plus exceptionally high output power.
Primary applications include:
Receiver sensitivity
· adjacent channel blocking
· spurious response
· SINAD
Amplifier
· intermodulation
· 1 dB compression testing
Mixers, filters, component characterization
Avionics: ILS/VOR/DME
Wireless product test
EMC
TETRA
Paging
|
|
| The MTI Instruments Model 1510A Precision Signal Source features dual-channel Direct Digital Synthesis (DSS) that produces high accuracy signals over a wide amplitude and frequency range in a compact, portable device. It generates both voltage and charge (pC) signals to simulate a variety of transducers and sensors. With multiple wave shapes, adjustable frequency, amplitude and phase, a sweep function, and 40 memory locations, it’s the ideal tool for all your test and calibration needs. The 1510A also includes a new low-voltage bridge mode that generates 5-100,000µV, with closed-loop control, allowing accurate calibration of strain gage circuits and similar sensors. |
|
Description
Benchmark baseband, RF and microwave signal generators
Agilent offers the widest selection of signal generators from baseband to 67 GHz, with frequency extensions to 325 GHz. From basic to advanced functionality, each signal generator delivers benchmark performance in its class to address your test requirements in design and manufacturing.
Signal Creation Software
Agilent provides a comprehensive collection of application-specific software. Used with our vector signal generators, Signal Studio or embedded software will cut the time you spend on signal simulation.
Baseband Generation
Baseband Studio is a suite of digital baseband hardware, software application tools, and accessories that enable digital baseband and RF designers to generate, capture, impair, playback, and emulate real world signal conditions
|
|
The GX1110 is a high performance, single-channel PXI arbitrary waveform generator that offers function generator and arbitrary waveform generator functionality within one instrument. Built-in waveforms are available for use with both the DDS or AWG modes of operation and include Sine, Triangle, Ramp, Noise, Gaussian pulse and Sinx/x. A flexible sequencer is also available as part of the AWG's architecture, supporting the generation of complex waveforms.
The GX1200/1201 is a single-channel PXI-based Arbitrary Waveform Generator. The GX1200/1201 is a high performance waveform generator that combines many powerful functions in one small package.
The GX1200/1201 is a single-channel PXI-based Arbitrary Waveform Generator. The GX1200/1201 is a high performance waveform generator that combines many powerful functions in one small package.
The GC1300 is a single-channel PCI-based Arbitrary Waveform Generator. It is a high performance waveform generator that combines many powerful functions in one small package. Supplied free with the instrument is Arbconnection software, which is used for controlling the GC1300 and for generating, editing and downloading waveforms from a remote computer.
|
|
| The Function Generator is a full-featured, 30 MHz instrument that uses an innovative Direct Digital Synthesis (DDS) architecture. It generates many standard waveforms with excellent frequency resolution (1 µHz), and has versatile modulation capabilities including AM, FM, Burst, PM and frequency sweeps. It also generates arbitrary waveforms with a fast 40 Msample/s update rate. |
|
The GP1616H function generator is a programmable instrument capable of generating predefined Sine, Square, Triangle, Ramp, Haversine, Haver triangle and Pulse waveforms as well as a programmable DC output. The firmware is customized to be fully compatible with the Hewlett Packard 8116A GPIB command set. Software test procedures using the original HP8116A instrument require no code modification when upgrading to the GP1616H.
|
|
The FG2C and FG3C Meterman function generators allow wide ranging versatility at an affordable price. These bench instruments are used in depot services, design engineering, production or QC benches, school labs, and more.
These two function generators provide a substantial array of output capabilities. They are extremely reliable for heavy day-to-day usage in electronic troubleshooting, production manufacturing test or as a breadboarding signal source. |
|
| The performance of a low distortion analog source and the precision of direct digital synthesis (DDS) is combined in the DS360. With less than 0.001 % total harmonic distortion (THD), 25 ppm frequency accuracy, and a broad range of features including sweeps and bursts, the DS360 is the ideal source for audio frequency applications. |
|
CNE III and CNE V, are broadband noise generators with a usable output power from 9kHz to 2GHz, and 30MHz to 1GHz respectively.
Three monopole antennae are available with the CNE III which may be attached to the BNC connector on the top of the unit enabling it to act as a radiating field source. The CNE V has a single monopole antenna available. |
|
The GP1550 series features:
- pulse widths from 10nS to 10S
- delays from 0nS to 10S with up to 6-digits resolution.
- Output levels are from -10V to +10V, with pulse amplitudes from 0.5V to 10Vp-p into a 50 Ohm load.
The GP1612H features:
- variable pulse widths from 10 ns to 10 s,
- delays from 0 ns to 10 s with up to 6 digits resolution
- adjustable output levels from -8V to +8V, with pulse amplitudes from .1V to 16Vp-p into 50 ohms load (.2V to 32Vp-p into open circuit).
These Pulse Generators also feature selectable complementary pulse and double pulse, in continuous, triggered, gated and counted burst modes.
They allow selection of predefined amplitude and offset for critical stimulus and testing of major semiconductor technologies as TTL, CMOS and ECL.
|
|
The DDS3-PC is a 12 MHz synthesizer that comes in PC card format and uses direct digital synthesis to produce low-noise sinusoidal signals. The DDS3-PC series produces simultaneous sine and clock signals (ACMOS/TTL) that can be set from 2 Hz to 12 MHz in 2 Hz steps. The DDS3-PCs are fast instruments that allow the frequency to be changed in approximately 1 ms to 10 ms. (Frequency switching time is limited only by ISA bus speed). The user can automatically sweep through a set of frequency, attenuation, and dwell time settings.
|
|
Our RF & Microwave signal generators offer tremendous value at a competitive price. With frequency ranges to 40 GHz, the 2400B, 2400S, 2500A, and 2500AS Series signal generators deliver industry-leading performance combining state of the art low phase noise, high output power, and fast switching. These features make it an excellent test solution for a wide range of CW, modulation, swept frequency, and fast frequency switching applications in both R&D and manufacturing environments.
We offer four series of signal generators: the 2400B, the 2400S, the 2500A, and the 2500AS Series.
The 2400B Series Signal Generator offers four distinct models available in four frequency ranges starting from 10 MHz or 2 Ghz - 8 GHz, 20 GHz, 26.5 GHz, and 40 GHz. The 2400B Series comes standard with front panel keyboard and display, GPIB / USB interface, high stability timebase, 0.1 Hz resolution, and Automation Xpress software. |
|
The R&S®SMU200A has been designed to meet all requirements encountered in research and development of modern communication systems as well as in their production. The R&S®SMU200A Vector Signal Generator not only combines up to two independent signal generators in one cabinet of only four height units, it also offers unrivalled RF and baseband characteristics.
Two signal generators in one
* Frequency options from 100 kHz to 2.2/3/4/6 GHz for the first RF path
* Optional second RF path up to 2.2 GHz or 3 GHz
* Up to two complete baseband paths
* Lossless combination of baseband signals in the digital domain (e.g. for testing multistandard base stations)
Outstanding signal quality
* I/Q modulator with 200 MHz RF bandwidth
* Very low SSB phase noise of typ. -135 dBc (f = 1 GHz, 20 kHz carrier offset, 1 Hz measurement bandwidth), typ. -139 dBc with the enhanced phase noise performance option
* Wideband noise of typ. -153 dBc (CW, f = 1 GHz, >10 MHz carrier offset, 1 Hz measurement bandwidth)
* Excellent ACLR of typically +70 dB for 3GPP FDD
* Very high level repeatability of 0.05 dB
* High output power up to +19 dBm (PEP), overrange + 26 dBm
* High-stability reference oscillator as standard |
|
PRESENTATION
ANGULAR PULSE CONVERTER
The APC (Angular Pulse
Converter) generates the
synchronization signals that are
typically found on the different
components of a motor.
It also provides the necessary
signals for the measurement
devices of an injection test bench
(EFS8244, EFS8246…).
APC
ADVANTAGES
• Wide range of generated signals
• Fully programmable output signals
• Digital phase loop allowing an extended range of the conversion ratio
PRINCIPAL FUNCTIONS
OPERATING PRINCIPLE
From external angular encoder signals (or from its internal clock), the APC generates
synchronization signals according to user parameters.
• Digital phase loop on the input converter
• Programmable divisions of the input signal frequency
• Generation of motor synchronization signals: crank, cam ...
• Emulation of incremental converter signals
• Independent mode for the internal clock
SOFTWARE
winAPC is the configuration software for the APC module. This
software runs under Windows98, Windows2000, WindowsXP
and uses an RS232 connection. |
|
VXI Technology is one of the leading suppliers worldwide of modular test solutions, offering a broad selection of instruments capable of meeting widely varying customer needs and applications. We develop high-performance instrumentation with a focus on density, modularity and price/performance.
All of our products come with industry standard drivers. These include driver source code and executable soft front panels for interactive control with the instruments.
VXI Technology provides the following types of instruments:
1. Single function, single-slot VXIbus modules
2. Multi-function instruments based on our VMIP™ platform
3. VMEbus instrumentation |
|
| National Instruments PXI and PCI signal generators include versatile arbitrary waveform generators, function generators, and RF vector signal generators. Whether generating simple sine and clock signals or complex I/Q modulated communications waveforms, the broad NI offering of signal generators can improve your prototyping and test systems by offering world-class generation performance and higher system throughput. |
|
Performance:
The CDX dual frequency RF generator comes in a 1000 or 2000 watt design. The high frequency (HF) section of the CDX provides 600 or 1000 watts of power, with optional frequencies from 2 to 60 MHz. The low frequency (LF) section can deliver 600 or 1000 watts, with optional fixed or variable frequencies ranging from 20 kHz to 2 MHz.
Applications:
This solid-state generator is ideal for plasma applications including bias, etch, deposition and ashing.
Features:
Compact packaging reduces space, service (electrical and plumbing), and spare inventory requirements
Complies to CE-Mark standards and is ETL Marked and SEMI F47 compliant
Protection circuits safeguard the amplifiers from over-voltage, over-current and over-power operating conditions
Gain-control circuitry stabilizes output power against line and load variations, and limits power during high VSWR conditions
Unique power monitoring in the low-frequency section measures delivered power into any impedance load
Optional phase locked output in the low- frequency section eliminates the need for a matching network in many applications |
|
|
