Controller modules

1725 Industrial products | 690 Companies
 
 
Moxa Europe
Modular remote terminal unit (RTU) controller  ioPAC 8020 Moxa Europe

The ioPAC 8020 is designed for front-end data acquisition and monitoring applications. With a powerful processor and a variety of interfaces, the 8020 can connect to devices such as PLCs, smart meters, controllers, and other serial devices. In addition to the serial interface, the 8020 also supports hot-swappable I/O slots for sensor signals, allowing ...

Multiwave
Laser diode driver module Multiwave

The Compact Laser Diode Driver (cLDD) is an all-in-one unit that combines a laser diode ⁄ SLED mount, a low noise current driver and a TEC controller in a self-contained enclosure of exceptional design and engineering. Initial configuration and alarm settings ...

Interlube Systems Limited
Oil level control system Interlube Systems Limited

RS (REPLENISHMENT SYSTEM)
AUTOMATIC OIL LEVEL REPLENISHMENT SYSTEM

Oil is one of the highest costs a logistic or bus company can have. Maintaining an optimal oil level at all times improves engine efficiency, minimises emissions, and provides substantial cost savings to the operator. Trying to do this manually relies on keen vigilance and discipline from the driver and the maintenance ...

ESK Schultze Kältekomponenten
Oil level control system  max. 31 bar | ILC ESK Schultze Kältekomponenten

With our partner, the firm WURM-Systeme, an electronic module has been developed ...

Oil level control system  max. 31 bar | OR-0-BC ESK Schultze Kältekomponenten

In multiple-compressor parallel systems, oil level regulators are ...

Oil level control system  max. 31 bar | ORE2-0-BC ESK Schultze Kältekomponenten

In multiple-compressor parallel systems, oil level regulators are ...

frigel firenze spa
Temperature regulator for injection molding machine  90 °C | Thermogel TDM-TDD frigel firenze spa

Working fluid: Water
Working temperature up to max.: 90°C
Models: Single zone (M) Double zone (D)
Configuration: Direct cooling, heating with electric heaters
Applications: Injection moulding, blow moulding, extrusion.
High flow rate (ΔT ...

Temperature regulator for injection molding machine  60 °C, 6 - 18 kW | Thermogel TRP frigel firenze spa

The TRP are equipped with sophisticated electronics and a particular hydraulic circuit which allow a high precision to be obtained in controlling the operating temperature (± 0.3°C).

Heat exchanger with “cold” operation to eliminate the problem of scale inside the exchanger itself.

The control panel is characterised by a simple and easy-to-use interface ...

Temperature control unit for injecting molding  48 kW, 90 °C | Turbogel frigel firenze spa

Temperature Control Unit
High Pumping Energy at the Point of Use
Complete Repeatability
Highest Productivity
Lowest Energy Losses

UNIQUE FEATURES
PUMPS - High Performance (flow/pressure)
COOLING ...

RAFI
Control device  ø 22.3 mm, IP65 | RAFIX 22 FS series RAFI

RAFIX 22 FS+, the new complete control component range

RAFIX ...

Control and signaling device  ø 16 mm | RAFIX 16 series RAFI

9 different actuator and display components: pushbuttons, emergency stop buttons, selector switches, keylock switches, potentiometer drive, buzzers and signal indicators.
Five collar types
- high profile round, mounting ...

Control and signaling device  ø 22.3 mm, IP65 | RAFIX 22 QR series RAFI

Various actuators and indicators: Pushbuttons, twin pushbuttons, emergency stop buttons, selector switches, keylock switches, potentiometer drive, buzzers and signal indicators.
...

Pizzato Elettrica
Control and signaling device Pizzato Elettrica

Elegance and functionality in one single series: Pizzato Elettrica extends its products range in the man-machine interface sector by introducing EROUND, the innovative line of control and signalling devices.
The new series, ergonomically studied to consent a comfortable and easy use of the devices, presents a particularly pleasant line with high attention to details making the products suitable ...

Emergency stop control device Pizzato Elettrica

Pizzato Elettrica has expanded its range of control and signalling devices EROUND line introducing the new boxes with 1 hole.
The new EROUND line boxes by Pizzato Elettrica feature 4 additional holes in the cover, which make it possible to fit the boxes to a wall by inserting the stainless steel screws through their external part, therefore without needing to ...

Dräger Safety
Control unit for gas detectors  QuadGard Dräger Safety

No matter what the application, Draeger's System Centers will design a monitoring system for your specific needs.

...

IRISYS - InfraRed Integrated Systems
Thermal imaging access control system IRISYS - InfraRed Integrated Systems

Access control systems allow authorised individuals to control access to specific areas in a facility. This is usually controlled by swiping a card or using an electronic key to gain access.

The problem with most access control systems is that ...

OLDHAM
Control unit for gas detectors  WX 4 OLDHAM

* 4-channel controller
* 4-20 mA or Bridge sensor inputs
* ...

Control unit for gas detectors  WX 16 OLDHAM

* 16-channel controller
* Analog and digital inputs
* Programmable ...

Control unit for gas detectors  WX 64 OLDHAM

* 64-channel controller
* Analog and digital inputs
* Programmable relays
* ...

CIRCONTROL SA
Access control system with management software  CIRPASS CIRCONTROL SA

Advanced HF access control system: CP-LH reader + Cirpass controller. * CPLH reader: HF proximity reader with RS-485 output. Power supply 12 Vdc. Consumption 110 mA. Dimensions 136x70x12.5 mm Surface mounting. Reading distance 5 cm (maximum range for Circard-HF card). IP65 protection ...

Proximity reader access control system  12 - 24 V, 60 mA, 84 x 84 x 10 mm | CP-E CIRCONTROL SA

LF proximity reader with RS-485 output. Power supply 12/24 Vdc. Consumption ...

Leica Geosystems
Machine control system for excavator  Leica PowerDigger Lite Leica Geosystems

Single slope control system for excavators

Leica PowerDigger Lite is a simple, economic excavator control system. It is perfect for backhoes and mini excavators and is ...

Machine control system for excavator  Leica PowerDigger 2D Leica Geosystems

Leica PowerDigger 2D is an easy-to-use, multifunctional 2D control system designed to make excavating easier and more productive. The system allows multiple elevation and slopes to be constructed, at any orientation without resetting the machine or laser height reference. ...

Machine control system for excavator  Leica PowerDigger 3D Leica Geosystems

Leica PowerDigger 3D offers 2D and 3D machine control in one control box. You can work with dual grade functions in 2D as well as reference models and GPS in 3D. Switch view with the touch of just one button.



Advanced 3D guidance
Leica PowerDigger 3D uses 3D design (CAD) models and state of the art GNSS tech-nology to guide ...

Elster Kromschröder
Atmospheric gas burner control unit  DN 10 - 40, 5 - 100 mbar | CG 1-3 Elster Kromschröder

Compact gas control systems with filter or dirt trap, governor, integrated pressure switch, two class A solenoid valves for safeguarding and control of atmospheric burners, forced draught burners and draught-assisted ...

Atmospheric gas burner control unit  DN 15, 15 - 70 mbar | CG 10 Elster Kromschröder

Compact gas control systems with dirt trap, governor, two solenoid valves and flow adjustment for safeguarding and control of atmospheric burners, forced draught burners and draught-assisted boilers on heating systems ...

Atmospheric gas burner control unit  max. 360 mbar | CG 15 - 30 Elster Kromschröder

Compact gas control systems with strainer, two safety valves (class A) and servo-governor for maximum control accuracy. For safeguarding and control of atmospheric burners, forced draught burners and draught-assisted ...

Miyachi
Resistance welding control unit  5 - 1 000 A | UB25 Miyachi

Features:
-Superior Low Energy Control for Micro Welding
-Ultra Fast Closed Loop Control
-Single Phase Power Supply
-Three Feedback ...

Resistance welding control unit  5 - 1 000 A | DC25 Miyachi

The DC25 Linear DC resistance welding control is ideal for microjoining applications which require exceptional control ...

Resistance welding control unit  MM-122A Miyachi

The MM-122A is a full function, cost effective unit designed to monitor every type of resistance welding control. It's miniature ...

recherche-kwref www di En 2012-05-21-26