|
|
| OmegaPAT and BetaPAT are suitable for periodic testing, troubleshooting or as a tool for electrical safety testing in workshops. |
|
The future of installation testing is here
The 1650 Series testers verify the safety of electrical installations in domestic, commercial and industrial applications. They can ensure that fixed wiring is safe and correctly installed to meet the requirements of IEC 60364, HD 384 and all relevant local standards. The unique ergonomic design, low weight, and padded neck-strap to free your hands, make operating a Fluke 1650 multifunction tester a pleasure. With easy-to-operate controls and a large display with exceptionally wide viewing angle, it's also comfortable and safe to use. Select from three models: Fluke 1651: Performs all basic installation tests including continuity/insulation/loop impedance and RCD tripping time
Fluke 1652: Also provides RCD tripping current level and RCD auto-testing
Fluke 1653: As Fluke 1652 but with earth resistance and phase sequence measurement. Has internal memory and a PC interface for documentation and reporting
|
|
BS601/602 is a multifunctional electric meter with which the user can measure electric equipment with various functions very easily and accurately. It is a portable and an integrated measuring instrument, which has various measurement functions such as insulation resistance, ground resistance, AC/DC voltage, electroscope test, phase test, and etc
BS601/602 is very convenient for the user because it simultaneously displays the min, max & average value on LCD when the user measures a variation value while Measuring. Especially, this instrument has functions to load measurement output in the inner memory and to transmit measurement output to the external equipment like a PC through IrDA.
Features:
- Insulation test of cables, transformers & motors
- Sensitive Ohmmeter for checking resistance of motor windings
- AC/DCV, Electroscope Meter & Phase Meter
- Basic accuracy of +/-0.2% for accurate measurement
- Digital graphic LCD with 9999 counts & Back-light
- Precise and Quick Response, 24-bit high speed A/D converter
- Internal Memory over 100 measured data
- MIN, MAX, Average & Data Hold
- Auto Power & Back-Light Off
- Ground Resistance Measurement with 2 or 3 points & down to 2 decimal places
- Low resistance measurement & continuity test (BS601)
- AC current & leakage current (BS602)
- Data Communication to PC through IrDA port
- Real Time Clock |
|
With the Motor Performance Monitor, Baker Instrument Company continues to pioneer new breakthroughs that demonstrate an ongoing commitment to quality, reliability, and competitive advantage. This on-line motor analyzer takes the next step in providing complete P/PM programs. It provides root-cause analysis through the separation of mechanical and electrical issues.
The Explorer Series II was superiorly designed to pinpoint challenges (voltage source, VFD, motor, load) your rotating machinery face. This self-contained portable instrument is computer driven with proven engineering, allowing all testing to be accomplished directly from the MCC or from Baker EP connection. |
|
The fast and easy solution to voltage, continuity and resistance measurements
Ideal for site conditions, the 3 models of the T100 Series 2-pole testers have a rugged construction and ergonomically formed housing for perfect handling. All models offer a patented three-phase rotation detection system providing quick phase rotation indication. Moreover they have a special electrical torch function for working in low light level environments and have an ingress protection rating of IP65. The T100 Series are compliant with EN 61010-1 and EN61243-3 requirements.
|
|
The testing device 92-7G/-7M is concieved for the control via an external PC/PLC. Therefore display and operating devices were renounced. The modular design of the testing instrument permits an optimal adaptation to the individual requirements of the user. Uneeded functions or equipment are omitted. Together with the device ELABO offers an efficient software package.
HV
The high-voltage is produced primarily over an internal electronic HV-source with a high clock frequency and regulated within less 10 ms. Because of the internal source a low residual ripple < 3% (accordingto VDE 0432-1) can be realised, also for DC tests with high currents. The synchronisation can be carried out on an external signal, on the mains frequency or internal (free-running). An electronic voltage ramp mode (voltage ramp up and ramp down) allows for tests of electronic equipment, at which a non-destructive test can only be carried out if the test voltage is increased slowly or for test items with high self-capacitances. The integrated residual voltage measurement assures a safe discharge of thecapacitances of the test items.
Insulation resistance
Insulation resistance measurement with voltages from 500 V up to 8000 V DC at full HV-current are possible. The resistance measurement is carried out together with the high voltage test at the sametime.
PE resistance
Measuring of the PE resistance or the voltage drop at the protective earth conductor through fully electronicregulated programmable test current 10 ... 32 A at an AC voltage of 6 or 12 V. |
|
EurotestXA is the top of the range installation safety tester with automated testing based on patent pending AUTO SEQUENCE®.
Because of the need to be efficient, fast and competitive but still reliable and concentrated on safety, all the technical content and innovations under AUTO SEQUENCE®, focus on taking care of the testing procedure itself. If you are after a high speed, safety, and reliable least-fuss testing instrument, look no further. |
|
Hipot test to 6kVDC 10mA
Hipot test to 5kVAC 40mA
Ground Bond test to 42 Amps RMS
Insulation Resistance 50 to 1000V
Automated Remote Interface
|
|
Universal mobile
The test system is equipped with a universal tester. With this new developed unit you can also carry out high- voltage tests with AC or DC.
Furthermore you can also realize an insulation- and PE- resistance test. Moreover the test system can be expanded with a leakage current tester for the latest norms. The components are connected with a matrix and they are controlled with a special software package.
The slots are placed in a 19” / 12HE Rack. The whole test system is placed in a mobile. To adapt the test probes serves a connection box. With this box you can contact all kind of test probes.
At the back of the tester are high- voltage sockets. So you can realize a manual high- voltage test.
As an option the mobile is equipped with a PC. |
|
| SIRIUS89N is a complete model to perform all safety tests in compliance to VDE 0413, measure of values of environmental parameters (temperature/humidity, illuminance, sound level with optional probes), leakage current with optional clamp and to perform a network power quality of single phase in compliance to EN50160 guideline.RCDs which suddenly trip out, transformers which overheat, motors which burn out, voltage sags and surges which create problems, all these problems could be easily solved with SIRIUS89N. The meter permits to perform a Loop impedance measurement (P-P, P-N, P-PE) also with high resolution (0.1mOhms) with the use of IMP57 optional accessory and five predefined recording settings are integrated in order to to help the user on the most common situation which are present on the network quality (EN50160, Voltage Anomalies, Harmonics, Start-Up and Power & Energy). SIRIUS89N can perform current measurements up to 3000A AC also by using a flexible clamp type in order to perform measurements on big cables or bars also. Thanks to the PC interface and the powerful software you will create accurate documents qualifying your professionalism more and more. |
|
| SIRIUS 87 is a model to performing all safety tests according to VDE 0413 on electrical installations. Inside model are integrated new fundamental features: the possibility to perform Loop Impedance (P-P, P-N, P-PE) at high resolution (0.1mOhms) with use of IMP57 optional accessory. Thanks to its PC interface and powerful software you will create accurate documents qualifying your profession more and more. |
|
E-Ze TEST NON-TRIP EARTH LOOP IMPEDANCE TESTER - EZ2100 - £199.00
A revolutionary new 17th Edition tester with T-Safe™
non-trip earth loop impedance check.
The E-Ze Test performs:
• non-trip earth loop test
• voltage test
• socket test
Test readings scroll through in sequence on the clear,
back lit, 32 character display to show socket problems,
or high/low voltage conditions. Then the earth loop
impedance test result is displayed. |
|
Featuring
RS232, PCL & GPIB Control
AC Hipot to 5KV
DC hipot to 6KV
Insulation Resistance to 10GW
ARC Detection
Ground Continuity to .001W
|
|
This world-wide unique system allows for automated testing of power transformers, CTs, VTs, resistance testing, and more.
Providing up to 800 A (or 2000 A with current booster) and 2000 V, it comes complete with an integrated PC. Its software routines test a wide range of substation equipment, and automatically create customizable reports. The compact design (29 kg / 64 lbs) and the innovative software save testing time and minimize transportation costs.
Benefits
- Lightweight (29 kg / 64 lbs)
- One test unit for multiple uses
- Automated testing and reporting
- Safety Features
- Prepared for the future |
|
CM-Line Secondary Injection test sets are the right choice for Utilities, Industry and Railway as well as for Relay, Meter and Measurement Device Manufacturers. The combination of a robust, truly portable, reliable and accurate Hardware designs together with the incomparable Test Universe Software is the basis for OMICRON’s ongoing success in maintaining its place as World Leader in the 3-Phase secondary injection test set market.
CMC 356
"The workhorse" - The CMC 356 is designed to optimally cover the modern requirements for commissioning and maintaining substations and protection devices. Its specifications cover applications in generation (including distributed generation), transmission, distribution, industry and railways - in high, medium and low voltage levels.
CMC 256plus
"The reference" - The CMC 256plus is the universal solution for testing old and new generations of relays and calibrating all kinds of meters, power quality devices and transducers. It is the first choice for all applications requiring the highest versatility and accuracy. The CMC 256plus supersedes the well-known CMC 256-6 test set.
CMC 156
The compact solution for three-phase testing of relays, meters and transducers, weighing only 9.8 kg / 22 lb. Ideal for applications requiring a high degree of portability (routine testing, etc.). |
|
Simply the best HARMONIC and FLICKER test system available today. HAR1000 does not require expensive and bulky AC sources, it uses a novel technique to provide active compensation of distortion on the national power mains.
Featuring dual analysers, the input and output signal are constantly monitored to ensure compliance. HAR1000 conforms to the latest IEC61000-3-2 Edition 2 but also allows testing to previous standard editions.
HAR1000 can be enhanced with the following accessories.
HAR-EXT1000, three phase system
Adds two further phases to the HAR1000. Simple connection without any hardware modifications mean this powerful extension can be added at any time to an existing single phase system.
HARCS Immunity software
This package can be added to both the single and three phase systems. It extends the system’s emission capability to include power line immunity tests such as harmonic immunity according to IEC61000-4-13, voltage fluctuations according to IEC61000-4-14 and ripple on DC according to IEC61000-4-17.
Adding the EMC Partner PS3, allows testing to IEC61000-4-28 for frequency fluctuations.
|
|
SYS61K
Compliance Test System for Harmonics IEC 61000-3-2 and Flicker IEC 61000-3-3
Application:
Evaluation system for testing devices generating harmonics and flicker
according to IEC 61000-3-2 and IEC 61000-3-3 (CE-Conformity)
- Modular structure, 1 to 3 phases realisable with the LMG95 or LMG500
- Power sources up to 5kVA per phase
- Existing customer owned power sources may be implemented, even for systems wich are discontinued in availability and support by their manufacturer e.g. HP/Agilent and others
- Inputs to register additional process values
- Improved analysis by means of integrated statistical and regression algorithms
- Auxiliary measuring signals to find the reason for harmonics and flicker
- EN61000-3-2/A14
- Consulting partnership in standardization commitees assures precocious support of newest standards, to be upgraded via internet
- Easy to control with powerful evaluation software |
|
| California Instruments cabinet systems are carefully designed and manufactured to provide maximum system performance and reduce installation cost. The various elements that make up an integrated high power AC test system are carefully assembled in a high quality 19 inch cabinet. All input and output wiring is properly sized and routed for optimal performance and safety. Configuration problems or wiring mistakes are eliminated when ordering a cabinet based multi-box power system like the 15003iX or a three phase compliance test system like the 30003iX-CTS. This translates into faster setup time and reduced installation hassles upon receipt of your power system. |
|
UE RAS: REMOTE ACCESS SENSOR - When remote sensing or access is an issue. Easy to install & simple to use.
RAS-MT REMOTE ACCESS SENSOR - Magnetically mounted contact probe with cable and remote access module (RAM) for testing consistency and for hard to reach test points. RAS-MT is included with the Ultraprobe 10,000 Inspection System and is an optional accessory for the Ultraprobe 9000.
UE MMP-7, UE MMP-8 & UE MMP-2U: MAGNETIC MOUNT PROBES - Magnetic Mount Probe with transducers and male connecting pins for attachment to the STM-2, STM-9 or STM-1 stethoscope modules. |
|
| Testing of Electricity Metering equipment, takes many different forms. Apart from accuracy and stability, meters must also be tested against interference conducted on the elctricity cables. This can be in the form of impulses generated by lightning events, switching action in the mains network or insulation breakdown. EMC Partner specializes in designing test equipment to meet the international standards for impulse testing of energy meters. IEC61036 and IEC62052 are typical standards for class 1 and 2 metering equipment. |
|
Replacing a test lead can be a real headache, particularly when you are in the middle of using one. BST has observed the problem and started making quality test leads from the 18 years Multimeter production experience. We offer a wide selections of test leads, probes and clips to serve the stringent demands of industry and hobby users. In case lengths of cable, colours and pin tips are not specifically listed can be ordered as custom products.
We provide "Flexible PVC" insulated cable as standard and there are "UL1803 18AWG"cable and heat resisted "Silicone" cable options. Most of our test lead and probe sets are designed to meet EN61010-1 and health & safety specifications for your assurance of safer operation and longer product life time. All products carry a limited 12 months warranty provided the product is correctly handled and used. |
|
| ... products without technical information |
| |
|
|