Lever valves

DN: 15 mm - 100 mm
Pressure: 1,000,000 Pa - 4,000,000 Pa
Temperature: 200 °C

... , compressed air, oil products Control standard bore ball valve AQUARIUS-BALANCE DN 15 – DN 200, PN 10, 16, 25, 40. The principle of operation of the AQUARIUS-BALANCE control ball valve allows to ...

DN: 150 mm
Pressure: 10 bar - 16 bar
Temperature: -20 °C - 90 °C

Butterfly valve DN 150 PN10-PN16 Lug type GGG40 with notch lever with grey sleeve EPDM DVGW drinking water, WRAS, ACS, W270 sleeves: - EPDM DVGW drinking water, WRAS, ACS, W270 body material: - ...

DN: 50 mm - 300 mm

• wafer type butterfly valve designed according EN 593 • flange connections according EN 1092-2 - PN6/10/16, ASME/ANSI B16.5 class 150, ASME/ANSI B16.47 class 150 series A • face to face dimension according EN 558-1 ...

DN: 8 mm - 100 mm
Pressure: 16, 25, 30, 64 bar
Temperature: -20 °C - 130 °C

Reduced bore ball valve, F/F threaded, with pressed steel handle.

Temperature: -20 °C - 185 °C

... position, the opening is perpendicular to the flow of water, stopping the flow completely. In a ball valve, flow is controlled with a lever. Placing the lever perpendicular to the pipe ...

DN: 10 mm - 200 mm
Pressure: 16 bar - 160 bar

Wafer type ball valve is a flange end 1pc ball valve with super-short one piece body design, has short distance between the valve seat and the end flange, less medium retention, superior ...

DN: 8 mm - 150 mm
Pressure: 10 bar - 40 bar
Temperature: -196 °C - 300 °C

... port way Ball Type Floating ball,fixed ball,V-shaped ball valve,The 3-way ball valve Stem Blowout-proof stem Seat Sealing Integral body seat ,seat welded and overlaid Valve ...

... position seats are protected from the medium robust and simple design zero leakage valve top entry design (work on a valve can be done with valve still installed) ...

DN: 65 mm

The water stop valve is used to stop water of fire hose, controlled by ball valve, easy to operate with its strong practicality, light weight. It can block the water flow quicky when the fire hose bursts, ...

DN: 50 mm - 2,200 mm
Pressure: 16, 10 bar
Temperature: -20 °C - 140 °C

A butterfly valve is a rotary valve (quarter turn valve) using a dise as the closure member. Butterfly valves can be either symmetric or eccentric (=offset), the latter ...

DN: 10, 12, 6, 8 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 60 °C

The ball valves of the 351/352 lines have been studied in order to render elegant, ergonomic and particularly versatile this common cutoff circuit accessory.

The Q11F-16P/R is a thread ball valve that can accommodate 1.6 to 6.4 Mpa of pressures in DN15 to DN100 with thermal range of -20 ℃ to 60 ℃. This PTFE seated valve has a body material of SS304, SS304L, ...

DN: 50, 20, 25, 40 mm
Pressure: 15 bar
Temperature: -20 °C - 80 °C

... outside, fittings are made of robust cast aluminium, painted in grey, with durable Nitrile gasket seals, pipe, fittings, and valves are available silicone-free.

DN: 5 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 100 °C

Body, Connecting Parts, Ball and Stem Stainless Steel, V4a (AISI 316) Each PH ball valve is subject to an inspection for resistance, sealing and special characteristics. Inspection control certificates 3.1 B or 3.1 ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C

Flapcon® BA102 Series Monoblock flanged ball valves are manufactured from cast iron, cast steel and stainless steel castings. Thanks to full-bore ball construction, they provide high capacity permeability. Due to the ...

DN: 65 mm - 200 mm
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 60 °C

... performance butterfly valve for closing or flow regulating applications. Greater flow rates and reduced pressure drop across the valve, along with fine control, integral seal and ease of actuation means ...

DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: -60 °C - 280 °C

... body threaded ball valves are available in sizes from DN8 to DN100 with BSP threaded end connections. Face to Face Dimensions are according to DIN3202-M3 and PN63 working pressure. Ideally suited to be used as a manual ...

DN: 6.35 mm - 25.4 mm
Pressure: 300, 350 bar
Flow rate: 200, 120, 60, 90 l/min

4 ways inverter valve, cast iron painted body. Zinc plated stem. Available in 1/4 – 3/8 – 1/2 – 3/4 – 1G both open and closed center.

DN: 50 mm - 400 mm
Pressure: 10 bar

... Handle Butterfly Valve DIN ASTM JIS Standard Plastic butterfly valve according to different medium has strong corrosion resistance, small volume, light weight, health non-toxic material and easy maintance ...

USED FOR 1-2KG FIRE EXTINGUISHER

DN: 50 mm - 500 mm
Pressure: 250 psi
Temperature: -29 °C - 121 °C

Series 31H Lug resilient seated butterfly valves are drilled and tapped to meet ASME Class 125/150 and PN16 flanges. Series 31H Valves will not be automated.

DN: 25 mm
Pressure: 0 bar - 40 bar
Temperature: -30 °C - 180 °C

DESIGN 1-piece designed wafer-type ball valve, full bore, mounting pad for actuator according to ISO 5211, Anti Static Device and TA-Luft approval (DN15... DN100. OPERATION Rotation of the handle through 90°. (Handle ...

DN: 0.5 in - 1 in
Pressure: 16 bar - 20 bar

... Brass Strainer Ball Valve Additional Info Packaging: Neutral packing Brand: PLB, OEM Transportation: Ocean,Land,Air Place of Origin: China Certificate: ISO9001 Port: Ningbo,Shanghai Product Description Brass ...

DN: 32 mm - 50 mm

This Industrial valve is a ball valve GB 2-way type characterized bya round body. Ball seats measure from DN32 to DN50 with O-rings in NBR, FKM, EPDM and MVQ. This ball valve works with ...

... position. Valve can be opened by use of operating lever, if a pneumatic actuator is used it will open with the actuator. Valve can be closed by remote cable or pneumatic actuator. Valve ...