|
|
RD modules for rounds:
Permanent-electro magnetic modules for rounds handling.
The special shape allows to easily clamp loads with curve surfaces.
CO / CV modules for coils handling:
Permanent-electro magnetic modules for coils handling, even in vertical or horizontal eye.
Special equipments for full-automatic lines.
|
|
They are designed for sheets with thicknesses starting from 4mm.
The model TM4, equipped with 4 permanent-electro cross-beams, is able to lift loads up to 12m lenght and weight up to 20 tons.
The TM6 version, equipped with 6 cross-beams, is able to work with loads up to 16m lenght and 25 tons SWL.
The hydraulic system allows high precision and reliability in time.
The same permanent-electro magnetic technology used in the TM model, but installed on a more economical fixed beam.
Capacity up to 10 tons, max load lenght 6m.
Allow to handle sheets from vertical position (stacks) to horizontal (machine bed) and vice versa.
Permanent-electro magnetic modules for profiles handling.
The modules are installed on a fixed beam, in tailor-made configurations with 2/4/8 pieces.
Fixed beams for laser / plasma cutted pieces.
The special shape and layout of the permanent magnets allows to handle the cutted pieces.
|
|
The manual lifter of the MaxX Tecnomagnete series represent an ideal solution for moving ferrous loads in an economic, rapid and safe way.
RAPID
With the simple motion of a lever, the magnetism lifts, transports and releases the load with extreme rapidity, needing only a single operator. It does not compress or deform the load, rather, it allows plenty of motion even with limited spaces.
SAFE
Once activated, a spring-loaded device blocks the manoeuvring lever, thus preventing any possible accidental deactivation. The technique defined as neutral crown will not permit interference with the original state of the permanent magnets, thus allowing to obtain maximum results in terms of safety and reliability.
ECONOMIC
The Tecnomagnete manual lifters are based on the technology of permanent magnets, therefore do not need electrical feeding. They are resistant to usage: the only movable component present is a rotor which is centred on ball bearings. This in turn develops neither physical contacts nor any friction during the rotation phase. Within normal working conditions they can be “maintenance free” over a long period of time. |
|
LONGITUDINAL ELECTRO LIFTING MAGNETS
These magnets are used to lift bundles of material with an irregular surface, which complicates lifting operations. Longitudinal magnets, however, have a particularly deep penetration field that makes them unsusceptible to such irregularities. This enable safe and effortless transport of bundles of material. Moreover, two or more of these magnets can be used, depending on the length of the bundles. In the event that people are present in the lifting area, however, extra mechanical slings must be fitted for safety purposes.
|
|
BAT GRIP
3 Ton capacity permanent-electro lifters with battery.
Equipped with a remote control, this lifter is capable to be used for a long period independent of the power supply (est 7
days), because the energy is only used for a fraction of a second during the MAG/DEMAG phase. |
|
The use of electro & permanent lifting magnets offers the following advantages:
- Speed, simplicity and the damage-free transport of workpieces of various
shapes and lengths.
- The possibility of precisely positioning the workpiece to be lifted
- Saving valuable storage space and manpower
All magnets can be supplied with electronic control. The control is equipped with an IGBT that switches the current to the magnets. Both voltage and current can be set at, for example, 80-100 and 120% for lifting, transport and compression.
|
|
EM modules for bundles
Electromagnetic modules with capacity up to 8 tons.
They allow to clamp bundles or packs of rounds, sections, sheets and other ferrous loads already strapped.
|
|
Electropermanent magnets utilize permanent magnetic material surrounded by an electrically powered coil. To energize an electropermanent magnet, a momentary pulse of D. C. power is applied to the magnet's coil in order to charge the permanent magnetic material within. Once energized, the electropermanent magnet does not require a constant source of power to retain the lifted steel coil. To release the steel coil, a reverse pulse of D. C. power is applied to the magnet's coil. The Electropermanent magnet design tends to excel when the steel coil's edge stagger is kept to a minimum.
Special Adaptations (Standard Circular, Rectangular, and Bi-Polar)
Able to prevent "telescoping"
Less storage space required
Transport requires less manpower |
|
Features:
Cold Operation
Since the electrical current is only used momentarily, no insulation or coil failures are caused by internal heating.
Safer Holding
The permanent magnetic material is unaffected by external power failure. Since Electro-Permanent magnets require electricity only to activate the magnet "on" or "off", there are no mechanical parts that could accidentally stick. Once the magnet is "on" the electricity can be disconnected indefinitely without any interruption to the holding power.
Cycle Time
Energizing the magnetic material typically takes 2-3 seconds.
Power Consumption
Operating costs are very low compared to conventional electromagnets because the power is applied for a minimal time. |
|
Walker incorporates other special features into Heatmaster® Magnets, including 100% duty cycle operation, cooling fins, and proprietary insulation materials. Heatmaster® Magnets built with these unique design features run "cool" in extreme conditions.
Different models for different temperature ranges
No external cooling required
No hassles due to fans, radiators or waterlines
75% and 100% Duty cycle operation
Welded watertight design
Special proprietary insulation utilized for layer-to-layer, turn-to-turn, coil-to-case insulation
Alloy steel lift chains or solid bails, as required
Heavy manganese steel bottom plate
Heavy-duty fabricated and cast construction available |
|
ROUND LIFTING MAGNETS
Electromagnets are intended for lifting mechanisms to catch and shift the cold ferromagnetic loads: scrap metal, charge, cuttings, metal bars, pigs, slabs, etc.
These lifting electromagnets can operate on the traverse.
Electromagnets are recommended for installation on light and mobile excavators such as FUCHS, LIEBHERR, ATLAS, SENNEBOGEN, CAT, ZEPPELIN, KOVROVETS etc. complete with a generating control system and a special traverse that ensures the use of an electromagnet without removing the grab.
All electromagnets can be produced as heat-resistant (to lift loads of the temperature as high as 600°C) and for underwater works. |
|
Safely lift and move steel without direct attachment by slings, hooks or cables. Complete line in both permanent and electro designs with various models, sizes and strengths to handle many different lifting jobs.
SafeHold® Permanent Lifting Magnets
Lift up to 10,000 lbs (4,536 kg). Compact permanent magnets lift and transfer steel and iron without slings, hooks or cables.
Selecto® Electro Lifting Magnets
The SL Series requires a compact Eriez variable-voltage rectifier controller or a fixed voltage rectifier to furnish the desired D.C. power from any A.C. source.
Bi-Polar Lifting Magnets - Rectangular
Specifically designed to provide greater contact and holding strength on castings, forgings, plates and structural shapes.
Bi-Polar Lifting Magnets - Square
Especially deep field provides greater holding on steel coils, bundles of bar, re-bar, tubing or pipe.
Rectangular Lifting Magnets
Three standard models, and lengths from nine inches (229 mm) to 96 inches (2,438 mm), allow you to size the magnet to the job. Eriez' smallest single unit has a holding power (with no safety factor) of 1,860 (845 kg; the largest, 38.8 tons (35,240 kg).
Circular Lifting Magnets
Eriez circular lifting magnets are general-purpose magnets with many applications. |
|
CM-400, CM-800 TOTERS
The TOTER is a compact, self-contained, lifting magnet which uses permanent magnets that maintain holding power indefinitely. Within the steel housing are powerful ceramic magnets whose field is controlled by the "on-off" position of the handle. Because no electric power is required, TOTERS can operate completely free of the restriction of power cords, and can be used where electric power is not readily available.
Recommended Applications
Permanent lifting magnets require good surface conditions to achieve maximum lifting.The TOTER is ideally suited for in-plant handling, loading, and unloading machine tools, and is commonly found in industrial plants, machine shops and warehouses.When greater holding capacity is required, refer to our battery magnets or our circular electric magnets.
Rated Lift Capacity
The maximum rated lift is based upon lifting clean, smooth, flat, low-carbon steel plate, 1 1/2" or thicker with the full area of the magnet's lifting surface in contact with the load. Derating is required for plates with rust or scale, plates thinner than 1 1/2", and alloy steels. More detailed ratings are contained in the OPERATOR'S MANUAL AND SAFETY INSTRUCTIONS. |
|
RECTANGULAR LIFTING MAGNETS
Electromagnets are intended for lifting mechanisms to catch and shift the cold ferromagnetic loads: sheets, squares, channels, rails, blooms, slabs, etc.
These lifting magnets can operate on the traverse and are recommended for installation on light and mobile excavators such as FUCHS, LIEBHERR, ATLAS, SENNEBOGEN, CAT, ZEPPELIN, KOVROVETSetc. complete with a generating control system and a special traverse for loading sheets, sguares, channels, rails, blooms, slabs and the like.
All electromagnets can be produced as heat-resistant (to lift loads of the temperature as high as 600°C) and for underwater works. |
|
Walker Self-Contained Lifting Magnets are versatile, compact and easy to operate.
Self-contained magnets can be used to move material in any plant, shipping/receiving area and storerooms, as well as on cut-off saws and burning and welding tables. Some units are able to handle pipe, tubing I and H beams, angles, channels, Tees, Zees and pilings.
Walker produces three types of Self Contained Magnets: Permanent, Battery and Electric.
PERMANENT LIFT MAGNETS
For Flat and Round Material Handling
Permanent magnets operate with the push of a handle. There are no restrictive cords and no power is needed. Models include:
CM400 & CM800 TOTERS For Flat Material Handling
The CM is a compact, self-contained, lifting magnet that uses permanent magnets to maintain holding power indefinitely.
NEO-250, 500, 1000 and 2000 For Flat and Round Material Handling
The NEO-250, 500, 1000 and 2000 Series material handling magnets are used in steel, supply, machine and die shops where heavy steel objects must be moved quickly and safely.
NEO-HV - For Vertical Handling
Walker NEO-HV material lifting magnets are designed for Vertical Loading into Machining Centers and Lathes. They will handle loading of flat, ferrous metal workpieces onto any machining center with horizontal spindle type lathes. They are used to load machining centers, boring machines and other chip-making operations. |
|
The manual lifters of the MaxX series represent an ideal solution for moving ferrous loads in an economic, rapid and safe way.
They are available in a range between 125kg (275 lbs) to 2000 kg (4400 lbs) capacity. Safety factor 3.
The radio-controlled Bat-Grip lifters are useful to handle loads with a remote control, without power supply connection.
They are feeded by a standard battery, with high capacity.
In fact the electricity is used only during MAG and DEMAG phases, keeping the battery level up for a long time (around 1 week charge).
EM modules for bundles: Electromagnetic modules with capacity up to 8 tons.
They allow to clamp bundles or packs of rounds, sections, sheets and other ferrous loads already strapped.
|
|
| ... products without technical information |
| |
Pneumatic rope balancer with pneumatically operated permanent magnet handling attachment. Particularly indicated for handling of steel part having both flat or round surface. Safety device allowing the automatic connection of the load balancing function only if the part is gripped.
Max capacity 80 kg.
Also suitable in execution for manipulator with capacities up to 250 kg or more, to be used also with tilting or turning devices.
|
|
|
|
see the results for the following category