Rated force: 0 N - 2.7 N
... The special design of the force cell ensure batch production and with fully automated assembly an ideal performance to cost ratio for high quantities. Fixed order quantities on request Compact construction for a wide ...
Rated force: 50,000 N
Button sensor for compressive loads of up to 10,000 lb. Compact and rugged, the R02 is ideal for heavy duty applications with space constraints. Features and specifications •Member of the Plug & Test™ ...
Mark-10
Rated force: 1 N - 500 N
Series R03 smart sensors are designed for tension and compression measurement applications in virtually every industry. Threaded holes on two sides can accept a variety of hooks and implements, making this sensor particularly well suited ...
Mark-10
Rated force: 1 N - 500 N
Extremely compact force measurement sensor for tensile and compressive loads in applications with limited space. The Series R04 is available in capacities from 0.25 to 100 lbF (1 to 500 N). Every capacity has the same ...
Mark-10
Length: 28 mm
Height: 36 mm
The CLA SC-002 is bidirectional, resistive type force sensor. The measurement system is composed of a semiconductor strain gage. The measurement shaft is made of a 0.5mm diameter axis with a positioning notch for calibration and measurement. ...
Rated force: 5, 10, 0.1, 1 N
Length: 30 mm
Height: 53 mm
... The sensor does not vary its measurement according to the pressure zone on the measurement tip. Applications The LC force sensor is ideal for any kind of force measurement, and can be used to create ...
Rated load: 2 t - 1,000 t
... conditions. • Capacities from 2Te to 1000Te as standard. • Cells designed to exactly suit your application. • Robust, Compact, Stainless Steel design. • Accurate to better than 1% • Proof Load 200% ...
Power Jacks
Rated force: 500 N - 20,000 N
... are specified in Newton can also be supplied in kg ranges • All ALMEMO® devices provide easy push-button adjustment of no-load and final value. • Measurement of fast changes in force and force peaks or high resolution ...
Rated load: 2.5 t - 49.9 t
... cell ships pre-calibrated, eliminating the need for test weights Each load cell is temperature compensated for increased accuracy For crane applications the load cell ...
Trimble
Rated load: 10 kg - 500 kg
... accuracy, the bellows of these load cells are protected by a stainless steel sheath. BS556 and BS556S laod cells have an integrated overload protection mechanism against impacts. ATEX ...
BAYKON Industrial Weighing Systems
Rated load: 10 t - 50 t
BY538 is a high-performance, alloy steel, hermetically welded and IP67-protected load cell. With its structure that can be installed directly under the rail, it provides easy and precise weighing, especially ...
BAYKON Industrial Weighing Systems
Rated load: 250 kg - 5,000 kg
Baykon BS063 / BS063S is a welded nickel plated alloy steel / stainless steel load cell available a wide range of capacities from 150 kg to 5000 kg. With IP68 protected metric threaded ...
BAYKON Industrial Weighing Systems
Rated load: 3 kg - 50 kg
... unmatched precision and reliability of the HOLI Scale AL130 Load Cell, a top-tier single-point aluminium weighing solution. OIML certified and backed by HOLI Scale's industry-leading expertise, this load ...
HOLI
Rated load: 30 kg - 500 kg
Explore the unparalleled precision of HOLI Scale's AL150 load cell. With high accuracy and a remarkable 500kg weighing capacity, this aluminium single-point load cell ...
HOLI
Rated load: 50 kg - 750 kg
... advanced engineering and unmatched precision. Widening Horizons While the market is replete with load cells, the AL174's combination of high capacity and pin-point accuracy is a rarity.
HOLI
Rated load: 0.01 t - 7.5 t
... Bending Cells, widely used in industrial environments, are also monodirectional. Traction devices, on the contrary, are those subject to traction only: dynamometers or load cells for ...
Riels Instruments
Rated load: 0.25 t - 100 t
... through the use of strain gauges. Wide assortment and numerous fields of application. We can split cells in: cell compression, traction cells, cell-way, ...
Riels Instruments
Rated load: 0.1 t - 200 t
... through the use of strain gauges. Wide assortment and numerous fields of application. We can split cellsin: cell compression, traction cells, cell-way, off-center. Very ...
Riels Instruments
Rated load: 0.1 t - 5 t
The robust and well-designed load cell from General Measure, with the C3 grade accuracy. GML-DHH3 S type load cell has the material option with alloy steel and stainless ...
General Measure Technology Co., Ltd
Rated load: 0.1 t - 5 t
The robust and well-designed load cell from General Measure, with the C3 grade accuracy. GML-DHH3C S type load cell has the material option with alloy steel and stainless ...
General Measure Technology Co., Ltd
Rated load: 10 kg - 1,000 kg
The robust and well-designed load cell from General Measure, with the C2/C3 grade accuracy. GML-DHH5 bending beam load cell has the material option of alloy steel and ...
General Measure Technology Co., Ltd
Rated force: 10 N - 2,000 N
Length: 2 m
... precision loadcells for tension & compression, Recommended for all high precision measurements, test benches, laboratory tests, process control equipments. These loadcells are protected against accidental ...
ACRN
Rated force: 5,000 kgf - 10,000 kgf
Height: 51, 38 mm
... safety FM certified All stainless steel, suitable for harsh industrial applications Interchangeability 0.25% for multiple load cell applications 5-point traceable NIST calibration Technical informations Excitation ...
ACRN
Rated force: 1 N - 5 N
Length: 2 m
... overloads in tension and compression. “S” load cells provide superior performance in compact packaging. Description Benefits Tension & compression Mechanical stop Options Rings and hooks Load ...
ACRN
Rated force: 0 kN - 20 kN
Height: 26 mm
... mm This force transducer of the Press Force series is ideal for measuring both dynamic and quasistatic forces. The factory preloading and adaptability of these practical designs ensure readiness for ...
Kistler
Rated force: 0 kN - 300 kN
Height: 130 mm
... mm This force transducer of the Press Force series is ideal for measuring both dynamic and quasistatic forces. The factory preloading and adaptability of these practical designs ensure readiness for ...
Kistler
Rated force: 0 kN - 5 kN
Height: 10 mm
... miniature compression force sensor is particularly suitable for measuring dynamic forces and also quasistatic forces. Preloaded and provided with practical adaptation options, the sensor is ready for ...
Kistler
Rated load: 300 kg - 7,500 kg
G5i Reliable and accurate weighing Capacities 300-7500 kg IP68 Protection Able to legal metrology
GIROPES
Rated load: 18 t - 50 t
G8R High capacity for weighbridges Capacities 18-50 t IP68 protection Able to legal metrology
GIROPES
Rated load: 50 kg - 1,500 kg
G1i Reliable and accurate weighing Capacities 50-1500 kg IP68 Protection Able for legal metrology
GIROPES
Rated load: 30, 12, 3, 6, 20 kg
The transducers of the BC302 series are miniaturized low-profile load cells, with an alluminium alloy measuring body, for traction / compression loads, with extremely small dimensions ...
S2Tech srl
Rated load: 50 kg - 10,000 kg
The LS is one of the few true low profile shearbeam loadcells. If height is an issue with your application, consider a 1t shearbeam at only 24mm high, similar space savings are seen across the LS series. Known and ...
PT Limited
Rated load: 250 kg - 10,000 kg
... accuracy shearbeam load cell, available in capacities from 250kg to 10t in tool steel electroless nickel plated. A very popular Australasian shearbeam where it has become the industry standard and ...
PT Limited
Rated load: 250 kg - 5,000 kg
... resolution class III L:10,000 and classIII:9500 NTEP device, and similar approvals in other areas. It is insensitive to axial loads, yet super accurate. Constructed in alloy tool steel and electroless nickel plated ...
PT Limited
The tension/compression load cell is compatible with every CENTOR Star and/or Dual force and torque gauge. It is built to complete a set of force measurements in a cost-effective way. The properties of ...
ANDILOG Technologies
Rated force: 20 N - 50,000 N
... SPIP S9 series of S-Block force load cells. The high capacity cells are of external- and detachable type. They are automatically identified by all the Centor Star and ...
ANDILOG Technologies
SPIP L161 series miniature compression load cell with CENTOR Star, dual force guage and torque gauge provides force or torque calibrations at affordable price. It is developed to calculate small forces ...
ANDILOG Technologies
Rated load: 5 kg - 100 kg
... industrial and process weighing. These single point load cells are easy to install and are interchangeable with most other load cells of their type. All critical components ...
Cardinal Scale
Rated load: 20 kg - 200 kg
... TSSP specialty single point series is a high performance and low cost load cell for use in bench scales, medical scales, and a variety of other applications. These low-profile load cells ...
Cardinal Scale
Rated load: 450, 1,100, 1,800 kg
... while remaining flexible over the life of the cell. This special compound protects the load cell strain gages, and over a broad temperature range has no effect on load ...
Cardinal Scale
Rated load: 100 kg - 20,000 kg
... steel AISI 630 (17-4-PH) •Hermetically welded seal (IP67) •Low profile •Spherical loading button for optimum alignment of load •Top plate and base plate included •Double strain gauge bridge available (redundant circuit) •Simple ...
ADOS
Rated load: 30,000 kg - 625,000 kg
•Tanks weighing •Steel manufacture plants •High capacity silos weighing •Stainless steel AISI 630 (17-4-PH) •Hermetically welded seal (IP67) •Wide range of capacities •Individual test report •EX version for hazardous area available ...
ADOS
Rated load: 100 kg - 12,000 kg
... Hermetically welded seal •Low profile for applications with limited space •Spherical loading button for optimum alignment of load •Double strain gauge bridge available (redundant circuit) •Simple installation •Economical ...
ADOS
Rated load: 0.5 kg - 25 kg
... position of the load applied to the upper platform. Model 1660 load cells are designed to this single point type and are manufactured from high quality aluminum alloy of aviation standard. ...
BCM SENSOR TECHNOLOGIES bv
... while the other bearing is left free to float axially into the load cell. This allows for thermal expansion of the machine components. Number of cells It is possible to use only 1 ...
... strain gauged load cells compatible with the floor standing LRPlus Series materials testing machines. The HLC Series load cells have a 15-pin plug and mounting adapter. ...
AMETEK Chatillon
... strain gauged load cells compatible with the LR Plus and EZ Series bench mounted materials testing machines. The XLC Series load cells have a 15-pin plug and mounting ...
AMETEK Chatillon
These load cells are compatible with the LS Series test machines, the TA1 texture analyzer and the FT1 friction tester. These load cells are S-Beam designed with anti-rotation ...
AMETEK Chatillon
Rated load: 5 kg - 50 kg
... single point load cell is manufactured from high quality aluminium alloy and its design provides for high accuracy weight measurement, even with off-centre loads. It is suitable for ...
Thames Side Sensors
Rated load: 300 g - 3,000 g
... single point load cell is manufactured from high quality aluminium alloy and its design provides for high accuracy weight measurement, even with off-centre loads. It is suitable for ...
Thames Side Sensors
Rated load: 3 kg - 100 kg
... single point load cell is manufactured from high quality aluminium alloy and its design provides for high accuracy weight measurement, even with off-centre loads. It is suitable for ...
Thames Side Sensors
Rated load: 5 kg - 50 kg
The AF Series, manufactured by Laumas Elettronica, is a single point load cell that has been constructed out of a special steel structure. It also has a combined error of less than +/- 0.05 % and a protection ...
LAUMAS Elettronica
Rated load: 3 kg - 50 kg
features Off center load cell type SUP1 can be used in small capacity weighing systems. Some applications are: Small weighing platforms Hopper scales, etc Bench scales Price ...
Celmi
Rated load: 7 kg - 40 kg
... Compensated temperature range -10...+40℃ Operating temperature range -35...+70℃ Storage temperature range -40...+80℃ Safe load limit 150% Emax Insulation resistance >5000M Ω Cable length 1m, 5m Applications ...
SENSOCAR
Rated load: 25 kg - 250 kg
... Compensated temperature range -10...+40℃ Operating temperature range -35...+70℃ Storage temperature range -40...+80℃ Safe load limit 150% Emax Insulation resistance >5000M Ω Cable length 5m
SENSOCAR
Rated load: 50 kg - 500 kg
... Compensated temperature range -10...+40℃ Operating temperature range -35...+70℃ Storage temperature range -40...+80℃ Safe load limit 150% Emax Insulation resistance >5000M Ω Cable length 5m
SENSOCAR
Please specify:
Help us improve:
remaining