|
|
Beautiful appearance, excellent processing and stability should be guaranteed by material such as High Intensity ABS, PC, AC, and Polyester assured, Flammibility material and Glass 30% annexing material. The products was recognized by the Public Trust International Mark Germany VDE, TUV European Community CE and USA Underwiters Laboratories. The use is convinient for the installation of Terminal Box, the supply Swithchboard, Apparatus Box, electrical power supply and Control Box etc.
HIBOX has a various kinds of terminal box. The dimension is from 190x190x130 to 380x560x180mm. Also these boxes can be customized by cutomer's order. Also, all of HIBOX's products are waterproof and dust-free. (IP 66~67 NEMA 4X) Refer to the general catalogue of HIBOX on Direct-Industry or www.dsehibox.com
|
|
Desktop housings are available in different sizes and types. They offer designer aesthetics for interior applications.
Your advantages:
- Generously dimensioned, comfortable control and interface panels.
- Ergonomic shape.
- The PCBs can be fitted on both sides with interfaces that project beyond the actual width of the case.
- Non-slip pads for secure table top applications.
- Easy mounting.
- Comprehensive range of accessories.
|
|
The comprehensive range of boxes for potting electronic assemblies. With special cost advantages for series-type production.
Potted assemblies are protected from shock as well as temperature, dampness and chemical influences. The versions made of Duroplast are not highly resistant to fracture.
|
|
-Molded hinge type&latch type
1. Molded hinge&latch design is easy to separate the cover from the base for printing or processing holes&cutting.
2. It protects inner components from dirt, dust, oil, water by roof guard on top&cover gasket.
3. Type 4X&IP67 for indoor&outdoor application by neoprene gasket seal
4. Available 46 kind sizes from 90x120x70 mm to 630x830x285 mm
5. Selectable gray or clear cover
6. Available stainless steel wall mounting bracket
|
|
|
The FAMI polypropylene stacking and storage containers have been designed and produced to offer companies rational solutions to their various material storage and handling requirements. First class raw materials, together with detailed structural research are the basis for this top quality product. The wide range of containers is available in five colours to allow the storage of materials in easily recognisable categories.
|
|
This enclosure is NE-1515: The dimension is 150X150X90 mm.
We have enclosure from 50X65X55 and 80X82X60 mm
We have a various of this kinds of small plastic enclosures.
Just check them out at www.dsehibox.com
IP66-67, UL 5VA 4X type
-1/4 weight of metal box enables easy carriage and efficient work. Corrosion-resistant and superior insulation
-Waterproof and dust-free product which gets through strict quality inspections. Proved quality in many related tests.
-Convenient to use for console-alternative rail and button box, mini terminal, signal box, gauge/meter console, communication connection box and etc.
Refer to the general catalogue of HIBOX on Direct-Industry.
|
|
The OKW small plastic enclosures covers many different fields of application.
OKW products are incomparable in design and, thanks to their high level of technical development, are the ideals solution for comfort-oriented case users who are looking for something special.
Our wide range of services allows us to find fast, cheap, individual solution for you.
|
|
CAB
CAB wall mounting cabinets are manufactured of high impact resistance polycarbonate or ABS withstanding harsh industrial and outdoor environments. These cabinets are produced with hinged covers. Transparent cover options allow easy viewing of installed equipment and indicators. Glass fibre reinforced polyester cabinets are also available.
Dimensions of CAB PC/ABS range from 150*150*110 mm to 600*400*220 mm. Dimensions of CAB P range from 315*215*170 mm to 1030*835*300 mm.
PC: IP 65; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL-94 5V; UL 508
ABS: IP 65; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94 HB
P: IP 66; IK 10, T:IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V
|
|
œMaterial :ABS,PC OR PC+ABS
œTemperature arrange:-20Ž ~ 60Ž
œFlammability rating:UL94HB
œMost of 20 series boxes meet IP65 of IEC 60529 dustproof and waterproof requirement
œA wide range of size
œDesigned for mounting P.C.B.or DIN rail mounted terminal
œThe lid is hinged with the bases, and closed by easy lock
œReplacement of solid lid by transparent lid for 20C series
œCustom material and color available (Bone as standard color)
|
|
EURONORD range is designed to house DIN-rail mounted terminal block and various types of sensors. EURONORD enclosures are available in polycarbonate, ABS, polyester and aluminium. There are more than 170 different off-the-shelf versions available.
Dimensions range from 50*45*32 mm to 360*400*151 mm
PC: IP 66/67; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
PCQ: IP 65; IK 07/08; NEMA Type 1, 12, 13
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94 HB
ABQ: IP 65; IK 07; NEMA Type 1, 12, 13
AL: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 6, 12 and 13
P: IP 66/67; IK 08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
|
|
PICCOLO range is especially designed to house push buttons, terminal blocks, motor starters and electronic devices. They are also ideal for mounting and protecting process control sensors and switches. PICCOLO range is available in polycarbonate and ABS.
Dimensions range from 110*80*65 mm to 230*140*125 mm.
PC: IP 66/67; IK 08; NEMA Type 1, 4X, 6, 6P, 12 and 13; UL 94-5V; UL 508
ABS: IP 66/67; IK 07; NEMA Type 1, 4, 4X, 6, 6P, 12 and 13; UL 94 HB
|
|
Series D standard case
- plastic case constructed from
impact-resistant polystyrene, 3mm
- connected by snap locks; no screws
required
- easy assembly
Specifications
Application:
case for boards or small modules
Material:
polystyrene, 3mm
|
|
Self-extinguishing insulated boxes with double insulation. The bases and opaque lids are in PVC and the transparent lids in polycarbonate. Polished light grey surfaces to RAL 7035.
- Sealing gasket in all models.
- Lid fixing by lodking screws or hinges.
|
|
œ Material :ABS,PC OR PC+ABS
œ Temperature arrange:-20Ž ~ 60Ž
œ Flammability rating:UL94HB
œ Most of 10 series boxes meet IP65 of IEC 60529 dustproof and waterproof requirement
œ A wide range of size
œ Designed for mounting P.C.B. or DIN rail mounted terminal
œ Transparent lid is available for most models.
œ Wall mounting holes and lid attaching screws are outside the sealing area
œ Custom material and color available (Bone as standard color)
œ Standard delivery:1 box,1 lid,4 or 6 screws,1 seal
|
|
|
Made of halogen free, impact resistant, self-extinguishing thermoplastic material. SCABOX junction boxes are designed for power distributionin outdoor installations and for housing relays, timers, connecting strips, etc.
|
|
Thermoplastic enclosures are light, their impact resistance is very high and they are easy to clean. In addition, they are easily mounted and machined.
Polycarbonate is suitable for demanding conditions and also for outdoor use. The temperature resistance of polycarbonate ranges from -50 °C to +120 °C.
ABS is a more cost-effective material than polycarbonate. However, it is only suitable for indoor use. ABS has good resistance to certain chemicals, e.g. strong detergents used in dairies.
The Ensto Cubo M enclosures are made of glass reinforced polyester. Thanks to their sturdy construction, 7 Nm impact strength, corrosion and weather resistance and high tightness, they meet the demands of durability in severe environments.
|
|
PL6 Series GRP
The Ultimate In Robust GRP Construction.
Anti-Static Properties.
External Mounting Feet.
Corrosion Resistant Stainless Steel Lid Fixing Screws With Nylon Retaining Washers.
Durable Captive Moulded Silicone Gasket.
Stainless Steel Rating Label.
PL7 Series GRP
The Ultimate In Robust GRP Construction.
Anti-Static Properties.
External Mounting Feet.
Integral Steel Earth Continuity Plate.
Corrosion Resistant Stainless Steel Lid Fixing Screws With Nylon Retaining Washers.
Durable Captive Moulded Silicone Gasket.
Stainless Steel Rating Label.
|
|
- flexible use in
- advertising technology
- information technology
- sports facilities
- for indoor and outdoor use
- stylish frame design
- with single- or double-side display
field
- can be mounted upright or hanging
- non-glare plexiglass, tempered glass
or laminated safety glass panels
- customized solutions
- standard models are available
- up to IP 54 degree of protection
- corrosion-protected fixtures
|
|
MNX polycarbonate and ABS enclosures utilize world-class injection moulding technology. They are designed to house and protect all kinds of electrical and electronic components in the most demanding applications. The MNX includes more than 260 different variations.
Dimensions range from 100*100*35 mm to 255*180*175 mm.
PC: IP 66/IP 67; IK 08; NEMA 1, 4, 4X, 6, 12 and 13; UL 94-5V; UL 508
ABS: IP 66/IP 67; IK 07; NEMA 1, 4, 4X, 6 (12 and 13); UL94HB
|
|
|
|
|
|
|
Richard Wöhr GmbH does not only have in its program an enormous selection of standard housings, but is also in the situation to supply a customized solution co-ordinated with the respective application. Anywhere, where in the industrial, commercial, public and medical surrounding field one measures, one regulates, one steers, one examines and one seizes, are the housing systems the ideal solution manufactured developed by Richard Wöhr and. Influences like electromagnetic and electrostatic loads/unloadings, temperature differences, heat, cold weather, vibrations, impacts, shock loads, dirt, dust, humidity u.v.m. require everyday life and industrialsuited concepts, in order to thus exclude malfunctionings of controls and the endangerment from humans and machine. For many applications standard designs present themselves for favourable prices. On the basis of the key components ready to be installed customers in the building block principle PCPC PC, display as well as indicating and control stations can manufacture housings/mechanics, keyboard and CONTROLLER as well as further accessories. To the offer furthermore extensive services belong in the range sheet metal working, like consultation and construction (production of production-correct designs and data files), stamping machines and a transforming, milling, thread cut, bend/edge, slam shut, saw, weld, sharpen and deburr, pins press in/pins weld and rivet, bore, turn, to surface technique for optimum, decorative optics and reliable protection (, paint, powder-coat, screen printings, (glass bead) jets brush), complete solutions and system engineering.
|
|
|
Cases plastic: various materials: polystirene, polycarbonate reinforced glass fibers, dimensions of 50x52x35mm with 361x254x165mm, sealing IP66, full or transparent lid, boxes with buttons plastic, cases electric plastic, boxes distribution plastic, joint boxes cable plastic, self-extinguishing, high impact resistance and to the chemicals
|
|
DIN-MODULAR CASES TYPE A:
The DIN-MODULAR CASES TYPE A differ from conventional systems for mounting control panels complying with DIN IEC 61 554 through simple, screwless assembly of all case parts. This reduces production work and ependiture to a minimum. A further advantage of this design principle is the implementation of flexible case lengths to match the application exactly.
DIN-MODULAR CASES TYPE B:
THE DIN-MODULAR CASES TYPE B is available in 3 different case designs.
- For horizontal slide-in mounting of PCBs from the front, there are closed cases with removable front frame and rear panel.
- Versions with separate lids allow vertical and horizontal slide-in PCB assembly.
- A special version for 19" racks rounds off the comprehensive range.
|
|
|
|
|
|
Mobile enclosures are one of the main areas in the developement of new products at OKW. This makes it possible for us to present to you the whole variety of our system.
Depending on the type, the cases are already prepared for the use of standardised LCD and graphics displays, standard batteries and rechargeable batteries, PCMCIA cards, switches and membrane keyboards.
Mobility and ergonomics:
The working world is becoming increasingly mobile. We at OKW have made it our goal to offer you the cases to make this possible, with optimum user-friendliness and functionality. In the development of new solutions, therefore, design and product ergonomics are the main focus.
Design for people:
Attractive, high-quality, up to date. We use design-oriented case technology to create the basis for an increase in the value of your products.
Love to details:
- high-quality surface for the visual and tactile senses
- polished front surface for optimum efficiency level with infrared versions
- combination of different plastic material for improved touch sensation and protective function
- innovative technology
- the same aesthetic standards for cases and accessories for a harmonious whole
|
|
The comprehensive range of wall-mounting cases offers you a wide choice.
Application-specific orientation is typical for each family of cases
Your advantages:
- Ergonomic operating area.
- Practical for service personnel.
- Without/with separate terminal compartment.
- Robust construction.
- Modern design.
- comprehensive range of accessories.
|
|
DIN rail case 420 for PCB size 100mm x 160mm
DIN rail case 420 for PCB size 100mm x 220mm
|
|
The new hand-held enclosure system for data acquisition and instrumentation in mobile applications.
Mountable components:
Chip card/magnetic readers, scanners, PCMCIA-interfaces, displays, membrane keypads, switching mat sets, plug connectors, socket connectors etc.
|
|
A convex design to match the curves of the body is the characteristic feature of the ERGO-CASE range of cases.
As "bodycases" they for the first time make it possible for the user to wear the unit comfortably - whether on their arm, chest or waist.
The innovative design not only makes it easier to operate but also easier to read off.
|
|
A practical range of PLUG CASES for many applications:
- country specific
- conforming to standard
- flame-resistant
- robust and impact-resistant
Simply an extremely functional solution for your electronics.
Live parts and socket versions in flame-resistant material PC/ABS (UL 94 V-0).
|
|
ITW TekFast hole plugs provide a strong, effective seal for gage and drainage holes necessary for assembly-line operations.
Key benefits of our hole plug designs:
- Cost Effective - Replaces typical metal hole plugs with a light-weight, inexpensive part.
- Non - Corrosive
- Ergonomic - Designed to snap into position quickly and easily.
- Superior Sealing - Heat activated adhesives provide high strength and fill any gaps or voids between plug and sheet metal.
- Versatile - Can be designed for any hole configuration.
|
|
|
|
