Vertical machining centers

X travel: 1,100 mm
Y travel: 600 mm
Z travel: 600 mm

• Mitsubishi M80A Controller • 15" LCD Screen Control Panel • 20 bar CTS (Coolant Through Spindle) • Air Gun and Coolant Gun • Rigid Tapping • M30 automatic power off • Full moulding package in controller • Heat exchanger on electrical ...

X travel: 800 mm
Y travel: 550 mm
Z travel: 550 mm

• Mitsubishi M80A Controller • 15" LCD Screen Control Panel • 20 bar CTS (Coolant Through Spindle) • Air Gun and Coolant Gun • Rigid Tapping • M30 automatic power off • Full moulding package in controller • Heat exchanger on electrical ...

X travel: 4,200 mm
Y travel: 2,500 mm
Z travel: 1,000 mm

• Mitsubishi M80A controller with mfr. warranty • 15" LCD screen control panel for all models • 20 bar CTS (Coolant Through Spindle) • Air gun and coolant gun • Rigid tapping • M30 automatic power off • Full moulding package in ...

X travel: 3,300 mm
Y travel: 250 mm
Z travel: 200 mm

Machining center with moving column and vertical spindle with 4 axis controlled by CNC including rotation of the clamp base which allows any angle ranging from -90 ° to + 90 ° in automatic ...

... materials. •Long-life moving parts with automatic lubrication system. •The standard model has 5 chip buckets, 10 clamps and 8 tool holders. •Mitsubishi CNC M720VW control unit, internal HDD, optical communication, ...

... areas where sawdusts and wastes fall provides a long life. • - Standard model has sawdust conveyor, 10 clamps and tool chuck with 16 tool holding capacity. Number of clamps can be increased optionally. • ...

X travel: 4,385 mm
Y travel: 1,250 mm
Z travel: 590 mm

• - Standard model has 6 clamps and tool chuck with 8 tool holding capacity. • - In order to ensure continuous precision, stress relieving method is applied in cast and welded pieces. • - The absence ...

X travel: 3,200, 4,200, 2,200 mm
Y travel: 1,700, 1,900, 2,100 mm
Z travel: 900 mm

... central lubrication system. The tool magazine and tool changer are mounted in parallel in the X-axis and are detached in the work area. Tools are being changed in a fixed X-position in the topmost ...

X travel: 3,000 mm - 12,500 mm
Y travel: 1,630, 1,400, 1,125 mm
Z travel: 1,850, 1,350, 1,800, 1,300 mm

... enclosure with roof Chip conveyor Coolant unit Options for the basic machine Motor spindle ― Torque: up to max. 690 Nm Tool magazine Drive system: ― X-axis with linear drive ― X-axis with rack and pinion drive

X travel: 720, 620 mm
Y travel: 520, 600 mm
Z travel: 460, 520 mm

... working area and compact floor space requirement. Based on the machine design simultaneous 5-axis machining of workpieces as well as 5-sided machining are possible when using the integrated hydraulic ...

X travel: 1,000, 600, 800 mm
Y travel: 600, 700 mm
Z travel: 480, 380 mm

... Innovative spindle design can absolutely eliminate overhanging problems, providing the best Machining & Engraving Solutions. Transmission system Extra Heavy Duty Roller Type Linear Ways on X-Y-Z axes; Class ...

X travel: 750, 650 mm
Y travel: 410, 460 mm
Z travel: 540, 510 mm

Easy chip flow splash guard design. The enhanced ribs in major construction parts provide the super rigidity for heavy duty cutting or for high speed cutting. The heavy-duty linear guide way is applied in X, Y, and ...

X travel: 850, 1,000 mm
Y travel: 560, 600 mm
Z travel: 560, 600 mm

X/Y/Z axes adopt heavy duty linear ways for A type machine. It ensures the characteristics of high rigidity, low noise and low friction. High speed feed-rate and contour cutting accuracy are achieved. A central rod guides ...

X travel: 2,200 mm
Y travel: 2,010 mm
Z travel: 300, 600 mm

... range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm ...

X travel: 3,200 mm
Y travel: 1,510 mm
Z travel: 300, 600 mm

... range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm ...

X travel: 3,000 mm - 5,000 mm
Z travel: 650 mm - 800 mm
Rotational speed: 40 rpm - 400 rpm

X travel: 2,000, 4,000, 6,000 mm
Y travel: 1,650 mm
Z travel: 800 mm

New range of machining centres including 3 or 5 axes. Its structure is compact, powerful, versatile and easy to handle for the machining at high speed of non-ferrous materials (technical plastics, thermoformed ...

X travel: 6,000 mm
Y travel: 3,500 mm
Z travel: 1,200 mm

Rotational speed: 24,000 rpm
Power: 32 kW
Weight: 7,500 kg

... various clamps can be chosen as option, other components are available to be customized according to requirements. • Heavy duty gantry frame structure and machine body and most mechanical machine parts are proceed ...

Rotational speed: 2,400 rpm
Power: 88 kW
Weight: 4,750 kg

... vacuum everywhere. Table size 2800×1230mm×2 Main spindle power 12kw×4 Max rotating speed 24000rpm Vertical drills 8×4 Vacuum pump 7.5kw Suction flow rate 250m3/h×2 Dust ...

X travel: 2,200 mm - 6,200 mm
Y travel: 1,700 mm - 3,600 mm
Z travel: 700, 900, 1,100, 1,300 mm

... machines are designed for use in general machining and tooling, but also for the aviation industry. The structures, extremely rigid, allow both the use of heads with very high torque and 3 axis high speed milling ...

X travel: 3,000 mm
Y travel: 2,000 mm
Z travel: 1,100 mm

The new D321 line is the best solution for mold finishing applications having a compact size with a very large working envelope. The wide opening front door is ideal for loading large and heavy workpieces while offering an unsurpassed ...

X travel: 2,200, 4,500, 6,800 mm
Y travel: 3,500 mm
Z travel: 1,400 mm

The GTF/M machine line features a compact, self-supporting, cast iron base, requiring no special foundations and delivering dynamics, speed and accuracy meeting the requirements of the most demanding applications. It is ideal for plastic ...

X travel: 3,060 mm - 6,000 mm
Y travel: 2,500 mm - 3,900 mm
Z travel: 1,000 mm

HVM-3018 HVM-4018 HVM-4025 X-axis travel 3,060 mm ( 120.5" ) 4,000 mm ( 157.5" ) 4,000 mm ( 157.5" ) Y-axis travel 2,500 mm ( 98.4" ) 2,500 mm ( 98.4" ) 3,200 mm ( 126.0" ) Z-axis travel 1,000 mm ( 39.3" ) 1,000 mm ( 39.3" ...

X travel: 700 mm - 1,000 mm
Y travel: 500 mm - 1,000 mm
Z travel: 350 mm - 500 mm

The brand new high speed series, with AWEA core strengths, possess superb bridge type structure. The series are equipped with advanced FANUC controller and the software of AWEA Optimal Parameter System. F-16 series are particularly suitable ...

X travel: 7,000, 6,000, 5,000, 4,000 mm
Y travel: 4,000, 3,200 mm
Z travel: 1,000 mm

... with AWEA’s industry leading technology and high quality components, the MVP series double column bridge type 5-face machining center gives you automatic multi-face cutting power with maximum working ...

X travel: 1,820 mm
Y travel: 1,000 mm
Z travel: 1,000, 800 mm

... Portal fixed directly to the base-plate like a single monolithic structure suitable for transmitting miximum rigidity to the tool being worked. Supporting bese-plate studied to limit the dispositions for fastening to ...

X travel: 2,400 mm
Y travel: 1,000 mm
Z travel: 1,000 mm

is a high-speed vertical bridge machine center with a sliding rotating table. This machining center is the right combination to satisfy various processes for the following ...

X travel: 2,500, 2,000, 3,000 mm
Y travel: 1,800 mm
Z travel: 1,000 mm

is a high-speed vertical bridge machine center with a sliding table. This machining center is the right combination to satisfy various processes for the following applications: - ...

X travel: 1,000 mm
Y travel: 600 mm
Z travel: 560 mm

... fluid tool cooling through spindle or from flexi-jet nozzles Air gun and water gun chip conveyor, belt type Full protection including sliding front door and safety lock. 4th axis preparation interior lighting OPTIONS: part ...

X travel: 1,200 mm
Y travel: 700 mm
Z travel: 500 mm

X travel: 5,000 mm - 30,000 mm
Y travel: 1,500 mm - 2,500 mm
Z travel: 5,000 mm - 7,600 mm

... . The AERO is the line of medium/large size gantry machines. It is dedicated to 3 – 5 axis high speed machining as well as heavy duty machining on hard materials (steel, inconel, titanium, ...

X travel: 3,000 mm - 30,000 mm
Y travel: 1,500 mm - 2,200 mm
Z travel: 2,700 mm - 4,700 mm

... stability. The result is a machine that guarantees high accuracy and wide flexibility of machining and configuration. The XS high-speed Gantry milling center is the result of over ...

X travel: 2,500 mm - 30,000 mm
Y travel: 1,200 mm - 1,750 mm
Z travel: 1,800 mm - 3,600 mm

... precision and reliable 5-axis gantry machining center ideal for high speed machining. The SPEEDLINER is a 5-axis gantry machining center with very ...

Power: 15 kW
Weight: 13,700 kg
Overall length: 9,000 mm

CNC Working center equipped with 90° positioned working unit to machine welding elbows (facing and external chamfering) and equipped with an automatic loading/unloading system. General features Ø Min. Of Curve ...

X travel: 1,020 mm
Y travel: 700 mm
Z travel: 500 mm

3-Axis-CNC-machine center, for use in constructing and forming tools in aerospace technology or in the pharma industry. Extremely rigid and thermally stable, movable control panel. Ladder design of the bridge provides ...

X travel: 270 mm
Y travel: 120 mm
Z travel: 220 mm

... narrow tolerances and high surface finish requirements can be met are just two of the reasons the 301S2 machining center is the perfect solution for machining workpieces with small dimensions ...

X travel: 270 mm
Y travel: 120 mm
Z travel: 220 mm

... the 308S2, offers maximum functionality whilst remaining highly compact, and enables milling speeds of up to 60,000 rpm to be reached. The 308S2 machining center has proven itself ...

X travel: 250 mm
Y travel: 200 mm
Z travel: 310 mm

The 401s2 is a 3-axis vertical spindle machining center designed for machining high precision main plates and bridges for the watchmaking sector. Generally, its design ...

... working axes, automatically performs angular cutting, drilling and milling on the various sides of the profile. The workpiece is accurately positioned and clamped to ensure maximum machining precision. The ...

X travel: 45 mm
Z travel: 45 mm

... site situation. Both FANUC and SIEMENS can be used. MILLING WITH A TURRET Milling slots and machining cross-bores or key flats on the circumference or on the face are among the many ...

The vertical structure of the V series makes the best use of your resources in terms of production area. Fast, compact, and productive, the V series, with its vertical double spindle units, is outstanding ...

X travel: 1,100 mm
Y travel: 1,300 mm
Z travel: 700 mm

SERVO MOTOR Ail axis are driven by servo motors. It provides précisé accélération with the high speed. STRUCTURE of CHASSIS Reinforced. Vibration-Free. Riaid and Monoblock Châssis CAD CAM Program Wo are providing a program ...

Rotational speed: 24,000 rpm
Power: 5.5 kW

All axes are driven by servo motors. It provides precise acceleration with high speed. High quality and high precision rails, trolleys and ball screws are used to affect the axis movements with minimum vibration.

PROCESSING (SPINDLE) MOTOR High quality spindle motor ensures best quality with high speed and précision for ail applications. Our machine can be offered to our customer with automatic loading, unloading and cleaning System as a production ...

X travel: 520 mm
Y travel: 180 mm
Z travel: 850 mm

• 1 axial turret with 48 tools (fixed or rotating) • 3 hanging chuck with tail stock.

X travel: 300 mm
Y travel: 300 mm
Z travel: 300 mm

Flexible machining center with palettization Equipment • Rotating table NIKKEN CNC 250 • Moduls on turret head type TE 230159

X travel: 600 mm
Y travel: 600 mm
Z travel: 600 mm

Machining center for milling cylinder heads • Deep hole boring with through coolant 100 bars • Milling cylinder head • Milling of camshaft supports ...

X travel: 1,000, 850 mm
Y travel: 450, 500 mm
Z travel: 450, 600 mm

... Spindle T slot (numberxwidth) 3x16 mm Table loading capacity of 400 kg Spindle taper 150-600 (choose 150-750) Spindle center to column front surface 7.5 HP Ram travels 510 millimeters XYZ axis motor 1Kw AC servo XYZ ...

X travel: 610 mm
Y travel: 350 mm
Z travel: 460 mm

... 20.8 inches) mm Spindle center to cylinder 430 (16.9 inches) mm table Table size 710x350 (27.9x13.7 inches) mm T slot (size / number / min) 16x5 mm Feed rate Cutting feed speed 1 ~ 10 M / min Automatic tool ...

X travel: 760 mm
Y travel: 450 mm
Z travel: 460 mm

... Spindle center to cylinder 510 (20 in.) Mm table Table size 900x400 (35.4x15.7 inches) mm T slot (size / number / min) 18x3 mm spindle Transfer belt type Feed rate Cutting feed speed 1 ~ 10 M / min Automatic ...

... Manufacturing System) equipped with horizontal and vertical high speed machining centers (up to 24 tools each). They consist of 5 or 6 precision machining centers ...