Wastewater pumps

Flow: 0 us gal/min - 200 us gal/min
Pressure: 0 psi - 225 psi
Fluid temperature: 14 °F - 350 °F

For nearly 50 years, versatile L-Frame pumps have stood the test of time meeting thousands of application challenges with performance-enhancing, cost-saving features. Features • Low total cost of ownership • Simple ...

Flow: 0 us gal/min - 2,200 us gal/min
Pressure: 0 psi - 5 psi
Power: 1.5 kW - 4 kW

... programmable logic controller (PLC) to protect the machine against damage and overloads Typical Applications • Tanker reception • Pump protection • Fat/sludge conditioning • Abrasive sludge maceration • Screenings ...

Flow: 0 m³/s - 0.00111 m³/s
Pressure: 0 bar - 3 bar

... Mono CP pump, this product is available as a pump unit only or as a packaged pump system. The use of a single motor drive directly coupled to the pump gives lowest possible ...

Flow: 0 l/h - 500 l/h
Pressure: 0 bar - 2 bar
Power: 0.37 kW

... solid-laden, high S.G. media and where the process line requires good suction lift and may run dry intermittently. Typically, ROLLIT pumps would be installed where there is a need for higher flow, medium pressure requirements.The ...

Flow: 0 l/h - 2,200 l/h
Pressure: 0 bar - 2 bar
Power: 0.37 kW

... solid-laden, high S.G. media and where the process line requires good suction lift and may run dry intermittently. Typically, ROLLIT pumps would be installed where there is a need for higher flow, medium pressure requirements.The ...

Flow: 0 l/h - 6,000 l/h
Pressure: 0 bar - 2 bar
Power: 1.5 kW

... solid-laden, high S.G. media and where the process line requires good suction lift and may run dry intermittently. Typically, ROLLIT pumps would be installed where there is a need for higher flow, medium pressure requirements.The ...

Flow: 700, 1,000, 300 l/min
Head: 16 m - 24.5 m
Power: 1.1 W - 4 W

For the drainage of construction sites, trench ducts, and underground passages. Suitable to pump water out from cellars, garages and basements. Disposal of moderately heavy water containing some abrasive material. LIMITS ...

Flow: 400, 350 l/min
Head: 17, 27, 15 m
Power: 1.5, 1.1, 1.85 kW

The Cutty series comprehend electric pump with plunged impeller, this impeller is multi-pipe, open, with a cutting system in the suction. It is particularly suitable in presence of long, filamentous or fibrous fibres, ...

Flow: 400 l/min - 1,600 l/min
Head: 12 m - 30 m
Power: 1.1 kW - 7.5 kW

... - Continuous duty with completely submersed pump - Liquid density 1,2 Kg/dm3 ENGINE - Three-phase 230/400V-50Hz - Insulation Class F - Protection IP 68 MATERIALS - Motor body: Cast iron - Pump ...

Flow: 0.24, 0.16 l/min
Pressure: 0.3, 0.02 MPa
Power: 6 W

... industry: such as use as a pump for liquid monitoring Medical devices: if used as a reagent transfer pump Filling industry: as a transfer pump for filling liquids Coding industry: ...

Flow: 60, 80 l/min
Pressure: 14,700 Pa
Power: 39, 58 W

Pressure type Easy restart by micro swith Two directional control valve No need of grounding Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Air injection for bubble bath • Small ...

Flow: 52, 130, 375, 715 l/min
Pressure: 8 bar
Fluid temperature: -40 °C - 70 °C

ASTRAsolid (DDS) pumps share the same constructive and performing advantages as ASTRAevo pumps: a fast pneumatic exchanger increased unloading systems for performance optimization (without interfering ...

Flow: 0 m³/s - 0.375 m³/s
Pressure: 0 bar - 8 bar
Head: 90, 130 m

... configurations, the fiberglass pumps SATURNevo have superior benefits and are ideal for seawater applications and corrosive liquids and atmospheres. Long-coupled "ZGS" or close-coupled "ZMS" Compact ...

Flow: 0 m³/h - 50 m³/h
Pressure: 8 bar
Head: 48, 65 m

... eliminated while maintaining radial rotation friction. In addition, the pump-motor coupling is carried out without having to dismantle the pump body. Applications Water and wastewater ...

Flow: 90 m³/h - 8,000 m³/h
Head: 10 m - 50 m
Power: 2.5 ch - 13 ch

... building material and other industries. They can be used as Circulating Pump of FGD Absorbing Tower, Limestone Slurry Pump, Gypsum Slurry Pump, Waste Water Pump and Leakaged ...

Flow: 60 l/min - 570 l/min
Pressure: 8 bar
Head: 0 m - 80 m

... required in a pump was to overcome the resistance in the pump. Another major issue was the mid-port scenario when Air pumps were turned down to much lower air pressure in an attempt to ...

Flow: 24 l/min - 125 l/min

The Tapflo drum pump is ideal for mobile use. It is fitted with a drum tube in polypropylene (PP) or PTFE and a handle in stainless steel AISI 316L. The drum tube is delivered in any length up to 2 m. Tapflo diaphragm ...

Flow: 200 m³/h
Head: 30 m

... dredge pumps are mainly used as an excavator attachment taking place of a grab bucket when there is too much water, and mud and are not suitable for digging. It is driven by the excavator hydraulic system or a separate ...

Flow: 400 m³/h
Head: 40 m

The RELONG hydraulic submersible pump with agitator is a highly efficient and modular heavy-duty submersible dredge pump unit. The hydraulic dredge pump is mainly used as an excavator ...

Flow: 600 m³/h
Head: 15 m
Power: 55 kW

... plants, coal slime Product Features 1. It is mainly composed of a motor, pump shell, impeller, guard plate, pump shaft, bearing seals, etc. 2. The material of the pump shell, impeller, ...

Flow: 4, 3.4, 4.5, 3, 2.6 m³/h
Pressure: 7 bar

The C 30 series Neptune pneumatic water pump is an enhanced hose setup that generates 7 bar pressure rating. This system is mounted to a 5-meter hose which delivers the media into the pump. The compressed ...

submersible pump Spec Usage:Sewage Key Features *CV-series are designed for solid handling submersible pumps, enclosed with vortex impeller with spherical clearance 35mm and 56 mm are ideal for ...

Mohno screw pump Key Features Working Principles: Mohno Pump is a container type pump with a single shaft , turning eccentrically; it is composed of a rotor and a stator. The rotor ...

Flow: 0 l/min - 1,450 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m

... drainage. 4. Great suction ability(Max.5M). Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/impeller/shaft are ...

Flow: 0.03 m³/h - 180 m³/h
Pressure: 24 bar

PCM Ecomoineau™ M is the most compact progressing cavity pump (PCP) available on the market today. Its revolutionary design combines the legendary performance and reliability of PCM PCP technology with ...

Flow: 0 m³/h - 315 m³/h
Pressure: 12 bar

... Lagoa series of reciprocating pumps is designed for metering a wide variety of products, including minerals, paper and oil, across a range of industries. Lagoa reciprocating pump principle The Lagoa ...

Flow: 55 m³/h
Pressure: 15 bar

... greater water and associated cost savings by minimizing infrastructures and reducing filtration costs. By nature peristaltic pumps are easy to maintain thanks to their seal-less construction, and as the only wetted ...

Flow: 0 m³/h - 30,000 m³/h
Head: 130 m
Fluid temperature: 80 °C

The ClydeUnion Pumps Swallowglide is a solids handling, end suction pump, specifically designed for sewage, effluent and screened sewage. Robust design and features developed over years of running experience ...

Flow: 0 us gal/min - 4,000 us gal/min
Pressure: 0 psi - 175 psi
Head: 0'00" ft - 560'00"

The Series e-1510 base mounted end suction pumps deliver the highest efficiencies, performance and durability. All pumps feature stainless steel impellers and an expanded efficiency island for efficient ...

Flow: 0 us gal/min - 2,300 us gal/min
Pressure: 175 psi
Head: 0'00" ft - 400'00"

... close-coupled, end suction pump with footless volute has been designed to offer the highest overall efficiencies in the market for HVAC and plumbing applications. With the largest “Efficiency Island” compared to other ...

Flow: 0 us gal/min - 37 us gal/min
Head: 0'00" ft - 145'00"
Power: 0.5 ch

... Motor Shell: Constructed of AISI type 304 series stainless steel Shaft: AISI type 304 stainless steel high strength keyed pump shaft with impeller locking cap screw Discharge: 114″ NPT vertical discharge connection Suction ...

Pressure: 250, 500, 350 bar

Constant displacement pump with positive locking piston control Low noise level 600 - 1800 rpm speed range Incl. connection flange and screws

Flow: 5,000 l/h
Pressure: 2 bar - 2.5 bar
Power: 0.7 kW

... alkaline brass plating. TECHNICAL SPECIFICATIONS PUMP It is made of anticorrosive or highly protected materials to withstand acids and dangerous filtering-liquid components • Polypropylene (Moplen) pump ...

Flow: 2 m³/h - 800 m³/h
Pressure: 0.6 MPa
Head: 3 m - 50 m

... submersible wastewater pump is a newly developed submersible wastewater pump, which is designed based on the combination of the advanced technology from international ...

Flow: 400 m³/h - 8,500 m³/h
Pressure: 4.5 bar
Head: 3.5 m - 32 m

The ST model is a horizontal centrifugal pump with a non-clogging and non-stringing two-channel impeller. It is engineered for dry installation and universal use in the water and wastewater market, suitable ...

Flow: 250 m³/h - 3,000 m³/h
Pressure: 2 bar
Head: 2 m - 20 m

... discharge nozzle heading upward (end/top) and a cleaning opening near the pump discharge Three channel mixed flow closed impeller Bearing bracket DESIGN FEATURES Horizontal pump DN 250 up to DN 500, ...

Flow: 0 m³/s - 0.4 m³/s
Head: 45 m
Fluid temperature: 70 °C

... self-priming pump for solids handling applications. It can handle clear liquids or with solids. Its large volute design allows automatic repriming in a completely open system without the need for suction or discharge ...