ZE-4DI-2AI-2DO is an I/O module with 4 digital inputs, 2 analog inputs, and 2 digital relay outputs, for slave communication over ModbusTCP-IP (Ethernet) and Modbus RTU. The module has server functionality for the Ethernet communication port with Modbus TCP-IP protocol: 100 Mbps Ethernet port, 4 clients, and Embedded Webserver. Parameter setting is possible via Ethernet or serial port. It is also possible to repeat Modbus registers on TCP-IP protocol (nr. 1 Ethernet port) and Modbus RTU (nr. 2 independent slave ports) and the configuration of two analog voltage or current inputs.
Status LED indicators - Power supply/ IP address
Rx/Tx ModBUS
Tx Ethernet
Link Ethernet
Inputs / outputs status
Fail
Operating temperature - -25..+70°C
Storage temperature - -30..+85°C
Connections - Removable screw terminals for conductors up to 2.5 mm2
IDC10 rear connector for DIN rail 46277
RJ45
Mounting - 35 mm DIN rail 46277
Programming - DIP Switch (default configuration)
Web Server
EASY SETUP 2*
Special feature - LAN ModBUS TCP Server
Interfaces - Nr. 1 Ethernet 10/100 Mbps
Nr. 1 RS232/RS485
Nr. 1 RS485
Speed - Up to 115.200 bps / 100 Mbps (TCP-IP)
Supported protocols - ModBUS RTU, ModBUS TCP-IP, http
Digital inputs - Nr. 4
Type of digital inputs - PNP / NPN; Voltage input OFF 8V (max. 30 Vdc)
Max frequency 5 kHz
Power consumption 3mA @ 12Vdc, 10mA @ 24Vdc
Digital counters - Nr. 4 resettable counters @32 bit, max 5 kHz
Analog inputs - Nr. 2
Type of analog inputs - 0-20 mA / 0-30 V
Max resolution 16 bit
Protection 40V / 25mA
Digital outputs - Nr. 2
Type of digital outputs - Relays NA / NC SPDT, max 250Vac - 2A
Humidity - 30..90% non-condensing