... PCE-WSAC 50 Airflow Meter Alarm Controller Pre-alarm and full alarm Optional RS-485 modbus interface Displays current wind speed and average wind speed of last 2 and 5 minutes Power supply115 V AC / 230 V AC / 24 V DC Supply voltage for sensors ...
... Traceability and Quality Control in Pneumatic Conveying Systems At OGA, quality and traceability are key in our pneumatic conveying systems. Before manufacturing, each system undergoes 3D modeling to simulate performance, validate design, and optimize ...
... Sideros Engineering designs and manufactures highly customized automated solutions to be integrated with thermal cutting machines, welding and cutting robots. Due to the careful attention to details, and the wide technological knowledge in software, ...
This product is a powerful embedded computer and interactive touch screen terminal. It supports modular design, allows configuration of a single handle, HD telephone handset, microphone, etc., can be customized and integrated into telephone and communication ...
... - This product is a powerful embedded computer and interactive touch screen terminal. - It supports modular design, allows configuration of a single handle, HD telephone handset, microphone, etc., can be customized and integrated into telephone and communication ...
... Unitized equipment necessary for supplying vacuum and compressed air to the EOAT (End of Arm Tooling). Unitized pneumatic equipment necessary for suction conveyance by Vacuum Pad and grip conveyance by Gripper. Eliminating the need to select the necessary ...
2 tools (TKa Series) can be connected and operated simultaneously. 20 work groups are available per 1 tool. MMI by Touch screen panel 7”. Memory contains up to 100.000 tightening results, can contain up to 50 waveform data and 50 Dynamic torque data. ...
It often makes sense to optimize the workplace design at test stations in the production of electrotechnical / electronic products. In practice, there are two basic types: Consoles for electrical connection via sockets and/or terminals or laboratory sockets ...
It often makes sense to optimize the workplace design at test stations in the production of electrotechnical / electronic products. In practice, there are two basic types: Consoles for electrical connection via sockets and/or terminals or laboratory sockets ...
It often makes sense to optimize the workplace design at test stations in the production of electrotechnical / electronic products. In practice, there are two basic types: Consoles for electrical connection via sockets and/or terminals or laboratory sockets ...
The ECM3 is designed to control multiple SmarAct positioning systems such as SMARPODs and TRIPODs. The ECM3 rack module is compatible with the SmarAct MCS2 rack and can be used in one MCS2 rack housing together with up to four MCS2 driver modules. This ...
... Refractive index compensation for measurements in air is easily achieved with the Environmental Module. The Environmental Module (PS-EM) is an accessory product for the PICOSCALE. It monitors the environmental parameters such as temperature, relative ...
... The controller is required to operate the PICOSCALE Vibrometer and to record vibration data. The PICOSCALE Vibrometer contains two controllers, the system controller and the stage controller: The system controller hosts all the necessary optical components ...
... Self-monitoring and fail-safe burner controls for controlling simple gas burners with electric ignition. FEATURES Compact design Control and monitoring of gas and oil burners as well as gas and oil pilot burners of any capacity Pre-purge of boiler ...
DURAG GROUP
... Control unit for combination with optical flame sensors for monitoring gas, oil and coal flames. Particularly for applications with single burner view. FEATURES Simple adjustment Compact and space-saving design Connection of all DURAG GROUP optical ...
DURAG GROUP
... Control unit for high requirements, for combination with optical flame sensors. For monitoring gas, oil and coal flames, including in complex multi-burner plants. FEATURES Different presettings for FFDT and flame intensity switching threshold Consistent ...
DURAG GROUP
... Empty Control box with 1 to 5 spacers Color: grey ou yellow/orange Hole diameter : 22mm ...
... Automation increases reproducibility of single process steps and the productivity of complete chemical processes by fully automated runs. Buchi adapts and integrates commercially available up-to-date technology of leading suppliers which fulfill current ...
... SEO SEV PCS CENTRAL UNIT The SEV SY1 AA PCS CENTRAL UNIT directs one serial line, the SEV SY2 AA PCS CENTRAL UNIT directs two serial lines (loop 2500 m), up to a maximum of 254 devices (sirens, call points and other accessories) by means of signal concentrators. 1. ...
... The BCP PCS control box together with the SEV SY PCS central unit should be ideally installed in a manned area. The BCP PCS control box allows the activation of the sirens by pressing the specific button: • GENERAL WARNING • GENERAL EVACUATION • ...
Fluid control module that includes a high visibility LED display and the software required for controlling any U·pulser or U·pulser+ and solenoid valve combination with the rest of the NEX·U·® system components. The LED display shows the U·valve number ...
Tank level monitor module to control two tanks. When mounted in a NEX·U·® system it keeps real time inventory and increases operation safety preventing air entering into pumps when the tank is empty and overflow during clean oil delivery and in waste ...
... The IE-GuardFlex serves as the central control unit for 4B’s Distributed Hazard Monitoring Solution (DHMS). Utilizing industrial Ethernet technology, it connects to and monitors multiple machine-mounted sensors through 4B's leading IE-Nodes. The IE-GuardFlex ...
... Overview
Securtank is an advanced system designed to provide total protection for the fuel tank of industrial and commercial vehicles, effectively countering fuel theft. With next-generation digital sensors, the system detects any tampering ...
The control units AQ1 and AQ3 are equipped with 1 and 3 motor connections respectively and are designed for all Assfalg handpiece electric grinders. The control units support infinitely variable speed control and store the set maximum speeds for each ...
... Product name
TANGO 3 Desktop 2HE neo
Key features
- High-resolution stepper motor controller in a desktop chassis
- Control of 3 motor axes (X, Y, Z)
- Position resolution: 819,200 microsteps per revolution
- Up
... Control unit SER 60 With this control unit, the spindle can be operated fully automatically. All spindle functions can be controlled, changed and monitored via corresponding input and output signals. The simple design of the control facilitates integration ...
... Control unit SE 3 for setting the speed range 200 - 100.000 rpm by turning of a rotary knob and Switching the direction of rotation from clockwise to anti-clockwise Rotation for handpieces ESB 3-50 (Basic), ESS 3-50 (Slim), ESW 3-50 (90° angle), ...
... Control unit SE 1 for setting the speed range 200 - 100.000 rpm by turning of a rotary knob and Switching the direction of rotation from clockwise to anti-clockwise Rotation for handpieces ESB 3-50 (Basic), ESS 3-50 (Slim), ESW 3-50 (90° angle), ...
... ● Convenient installation Easy to use: reduce the installation wiring and control trouble of the client. ● Simplification of electrical layout: highly integrated hardware layout to simplify cumbersome wiring. ● Stable production capacity Intelligent ...
... The BPM 300-F0 is a compact, industrial quality battery presence monitor which indicates whether the battery is connected to a back-up system. This unit is designed for a small battery back-up system with 3A max battery current. It continuously monitors ...
... The electrical control boxes are designed to control the operation of electric wire-rope winches for lifting people from Fixator. They can control one or more winches. They are available in single-phase or three-phase version EN 1808. The boxes also ...
... Overview
Electronic drive for two synchronized linear actuators. Designed to drive two actuators in parallel using synchronization based on actuator pulse feedback. Synchronization is maintained by automatic speed adjustment during movement; ...
... For the electronic control of package leak detector LEAK-MASTER® EASY makes the operation of LEAK-MASTER® EASY even easier for user independent, fast, standardised test procedures complete documentation easy to retrofit Controler ...
... • Adjustable Startup Pressure • Dry Running Cut Out • Pressure Gauge for Setup • Status indication and reset The FCHM Series is a compact pump control modlue that combines a pressure switch, Dry-running cut-out, control panel, pressure reservoir ...
Sensata Technologies
The K610 is a next-generation scissor lift controller featuring the CoDeSys platform. CoDeSys programming framework is integrated directly into the ECU, which enables manufacturers to create their own customized functionality. The K610 is committed to ...
Sensata Technologies
The K600 Platform Control System provides the reliability required in demanding applications such as Mobile Elevating Work Platforms; K600 is committed to the full control of slab self-propelled scissor lift. The key parts of the K600 Kit are the P610 ...
Sensata Technologies
... Product description
The Angle Control is an electronic angle programmer designed to optimize stirrup production and improve precision in rebar bending. It is intended for bending machines and combined machines and ensures repeatable angular ...
... Description
The Basic Angle Control is an electronic system that stores up to 6 consecutive bending angles to optimize cyclic stirrup and bracket production. With a simple gesture you can recall desired settings, manage end stops and monitor ...
... Reliable and safe Telecontrol including PLC-Function for Measurement and Control Tasks Reliable and safe Telecontrol including PLC-Function for Measurement and Control Tasks -Control function for telecontrol systems -Signal inputs via ...
... Presentation
ThermalCore™ is a regulation and supervision cabinet dedicated to industrial infrared thermal processes. It pilots, controls and secures installations in real time, zone by zone, with degree‑level accuracy. ThermalCore™ also serves ...
Pressure: 0 bar - 230 bar
The 8030 is an advanced pressure controller/calibrator suitable for wide workload calibration of pressure devices such as transmitters, sensors and gauges. The standard unit can be configured for multiple ranges from vacuum to 100 bar (1500 psi), integrating ...
... With DESMI Automation you get a solution that increases efficiency, competitiveness and enables you to meet future challenges with a green and sustainable profile. With continuous development of our range of automation solutions, when installing pumps ...
Pressure: 2 bar - 10 bar
... Product Details
The QKL-B1HF is an ultra-high resolution proportional control valve. This series is an electronically controlled closed loop pressure regulator. The device converts a command signal to customers' specified pressure range. The ...
... The unit is microprocessor-controlled. Really simple to set-up and operate, has 2,5” TFT LCD The unit is controlled by a microprocessor. Simple to set up and use, it has a 2.5″ TFT LCD display. All settings can be easily set through the controller using ...
DAV TECH Srl
The DA valve controller is based on a 4.3-inch operator panel/PLC, multilingual, with an intuitive graphical interface. The controller enables rapid setup and system commissioning, managing up to two valves (operating simultaneously) and allowing the ...
DAV TECH Srl
The DAS valve controller is based on a 4.3-inch operator panel/PLC, multilingual, with an intuitive graphical interface. The controller enables rapid setup and system commissioning and is specifically designed for spray applications using a spray valve. ...
DAV TECH Srl
... (CNC control units) GENERAL The CNC control units iOP-19 are a revised version of the previous isel control panels iBP. All experiences have been incorporated into the new development of the iOP-19. They have an integrated 19" touch screen monitor, ...
In the case of an explosion, the EXKOP® controllers receive a trigger signal (e.g. from the signalling unit of the Q-Rohr®, an explosion vent, from a pressure sensor or IR-Flame detecor) and activate the connected isolation systems which prevents an explosion ...
... • The SDT340 and its associated sensors offer this measuring instrument unequalled sensitivity. The unit detects even the smallest perforations or “mini defects” not yet generating a significant degree of pollution. • Testing of the tank and associated ...
... Price-optimized control unit for small medium volumes and the connection of 1 stirring drive 2mag MIXdrive. Control unit with 10 watts stirring power, speed range from 120 up to 1,200 rpm, SoftStart for reliable catching/centering and safe accelerating ...
2mag AG
... 2mag control unit for DIN installation (electrical cabinets). Price-optimized control unit for DIN rail installation (electrical cabinets) for small to medium volumes and the connection of 1 stirring drive MIXdrive, with analog interface 0-10 volts ...
2mag AG
... Universal control unit for the connection of 1 stirring drive 2mag MIXdrive. Control unit with 20 watts power, speed range from 100 up to 1,600 rpm, jerk-free stirring also at low speeds, power setting (4-steps) for high power with regard to large ...
2mag AG
... Controlriv Gen3 is a process control for blind rivets, rivet nuts and lockbolts. It’is an essential tool for monitoring process quality, as it provides crucial information on successful clamping and stores detailed information in a log file.
Controlriv ...
The ePACT Controller gas detection alarm system is based on the RevPi Core 3+ platform including New Cosmos embedded HTML alarm handling software and alarm configuration software ePact. The alarm system is very flexible in design and easily configured ...
The gas detection indicator and alarm unit can monitor a variety of gas detector models for monitoring toxic and combustible gases and oxygen. Each gas detector is connected to an individual indicator unit. Indicator units can work stand alone with their ...
Designed for situations where the system control is to be managed mobile, the cabin systems stand out with their features such as modern appearance, modular structure and high stability. Kiosk tables are designed for limited areas where operator arm applications ...
Designed for situations where the system control is to be managed mobile, the cabin systems stand out with their features such as modern appearance, modular structure and high stability. Kiosk tables are designed for limited areas where operator arm applications ...