... DESCRIPTION innoCUFFis a heat protecting custom shaped cover cutted by a digital cutting machine. The basic material is glass fibre in combination with aluminium foil or a metalized polyester foil. The size of the innoCUFF-heat protecting shield will ...
IPROTEX
The unit is manufactured by Meca, and is a modular safety enclosure that has been specifically developed to provide a protected site within the operating area with automated installations, production robots, and as well as storage areas. The system also ...
... Customized Rectangle Reflective Aluminum Warning Sign Roadside Safety Caution This type of customs printed reflective/non reflective warning site safety sign made of 7 years vinyl board or aluminum board, thickness range from 1 mm to 5 mm. Description: 1. ...
Wuhan Jackwin Industrial Co., Ltd.
... Medium and high-voltage equipment Gas density monitoring of closed SF6 gas tanks Raising an alarm when defined limit values have been reached Special Features Local indication with switch contacts Temperature-compensated and ...
... Medium-voltage equipment Gas density monitoring of closed SF6 gas tanks Raising an alarm when defined limit values have been reached Special Features Case and wetted parts from stainless steel On-site display with switch contact ...
... Monitoring of the concentration of SF6 gas in the ambient air for guaranteeing operational safety in enclosed spaces Special Features Responds only to SF6 gas and is not sensitive to humidity and the usual volatile organic compounds (VOC) Fast response ...
... Description
WS-M stainless steel weather shield adaptable to Max actuators size M. Provides corrosion-resistant protection for actuator enclosures in outdoor environments. Designed to fit Max actuator size M configurations.
Brand
Schischek
Range
Max
Compatibility
- Compatible
... Product overview
WS-S stainless steel weather shield adaptable to Rotork Max actuators (size S). Schischek accessory designed for use with the Rotork Max actuator range; intended to protect actuator components from weather exposure and to facilitate ...
... • Easy-to-install protective shield with integrated fan • Special white coating (RAL 9010) minimizes solar heating • Simple probe mounting • Suitable for various probes Applications Snow guns, weather stations, agricultural meteorology, building management ...
Naturally ventilated shields are used where the natural ventilation (wind) suffices, e.g. measurement stations in the mountains.
... Anti-collapse mesh attaches to the backend of your warehouse's pallet racking and shelving to provide your operatives protection against any falling objects. It's also great as fencing to warn and protect your teams against machinery or hazardous materials. Anti-collapse ...
... Product Details
Hutchinson has developed high performance conductive rings to divert bearing electric currents and avoid electronic disturbances. One of the causes of failure of electric motor bearings is due to parasitic currents generated ...
Hi-Target Ground-based InSAR monitoring system, based on the principles of Synthetic Aperture Radar (SAR) and Interferometric Radar, is capable of extracting minute deformation and displacement information across large observation areas. This advanced ...
Cylindrical flange face protector designed to protect the raised face of a flange from dirt, moisture, paint and sandblasting during production, handling and transport. Provides a tight fit for secure temporary protection, with easy installation and removal. ...
... InfoAir - remote monitoring system for mobile air heaters InfoAir is a versatile remote monitoring system designed to enhance the use of portable heaters which have long been a versatile and cost-effective choice for various industrial and commercial ...
Air~Alert is ELGi’s own IoT-enabling device that upgrades your compressors to Industry 4.0. Air~Alert allows users to track their air compressor’s performance 24/7, remotely, from anywhere in the world. Air~Alert’s intelligent algorithm can also analyse ...
... Particle Measuring Systems FacilityPro® Processor provides a central hub for cleanroom environmental monitoring systems. The Processor communicates with cleanroom sensors, including particle counters and microbial monitors, while buffering data and checking ...
... Multi-Point Compression Latch Actuator, Key-Locking, 0 - 5mm ( 0 - .20 in) Door thickness, Zinc alloy, Powder Coated, Black The M3 system uses multiple over-center latch mechanisms to provide the ultimate in consistent compression along the entire ...
SOUTHCO
... Multi-Point Compression Latch Actuator, Locking Handle Style, Zinc alloy, Black Access Restriction - Pad Lockable Actuator Type - Paddle (includes bracket and screws) Compliance Specification - UL FTTA2 / FTTA8 Type 1 The M3 system uses multiple ...
SOUTHCO
... Multi-Point Compression Latch Actuator, Non-Locking, 0 - 5mm ( 0 - .20 in) Door thickness, Zinc alloy, Powder Coated, Black Actuator Type - Push Button Handle The M3 system uses multiple over-center latch mechanisms to provide the ultimate in consistent ...
SOUTHCO
... Integrated collision warning for industrial trucks The Drive Assist System driver assistance system can be used to implement integrated warning strategies for collision avoidance and to support the driver. The system offers an environment perception ...
... Level up your compressed air management • Save energy and improve sustainability – Programmable automatic pressure reduction and shut-off times • Enhance your maintenance capabilities – Measurement and follow-up of flow, pressure and temperature • ...
As a simple, economical add-on option for many Southco single-point latches, these fixed-rod latching systems can be included in your original cabinet design or retrofit as needed. The added latching points at the extreme edges of door panels provide ...
The Batch Monitoring System from the MMM Group has been tested according to the requirements of DIN EN 867-5 and was specially developed for the cycle control of sterilization. The test items (Process Challenge Devices) made from aluminum simulate the ...
... Product overview
Automotive manufacturers face capacitive interference currents originating from rotor shafts in electric drives. These currents can cause bearing and gear damage as well as broadband radio interference. This shaft grounding ...
Schunk Transit Systems GmbH
Description Unperforated cover with chequer plate for add-on tee fitting for BKRS walkable cable tray system. Suitable for indoor installation. Protects cables against damage and soiling. Pre-marked break-out openings for fastening with turn buckles. ...
Description The flexible grounding system combines resonance grounding and low-resistance grounding technologies to allow seamless switching between grounding modes depending on fault conditions. It protects personnel and equipment by limiting ...
... The PAX Advanced automated screening lane guarantees an excellent passenger experience throughout the checkpoint process. This pays dividends by helping your airport make security less stressful, more straightforward and comfortable for travellers. This ...
VANDERLANDE
... Early warnings from changes in current, temperature, leakage and vibration to reduce premature shutdowns 10 separate warning parameters identify part wear and tear Color HMI touchscreen ranging from 7” to 15” with up to 10 pumps side-by-side for quick ...
... The right solution for preventing structure deformations Exposure of a section of the machine or the entire machine to thermal shock can greatly impair its performance. Breton devised the patented Thermal Shield system, which makes it possible to protect ...
The Facility Monitoring Systems (FMS) for remote system monitoring can be configured to meet a wide spectrum of cleanroom management needs for various industries—including pharmaceutical production. The FMS can monitor non-viable air particle counts, ...
... SATO’s direct thermal wristband does not require ink ribbon for printing and is affordably priced to provide optimal cost-effectiveness. An easy and economical way to achieve patient identification and tracking, it is suitable for short-term usage ...
... FTMU is suitable for measuring airflow and temperature. Communication is established via analog and/or digital signal using Modbus. FTMU can also be commissioned via Bluetooth. The OneLink app is the perfect tool to monitor the airflow directly ...
... M&R’s Qwik-Klamp modular squeegee clamping system makes it a snap to assemble and disassemble squeegee holders and blades up to 56 cm (22"). And the modular base unit can be joined with one or more expansion units to enable clamping squeegee holders and ...
... Mobile online gas measurement system for breathing air and Nitrox applications up to 420 bar The B-DETECTION PLUS m is the compact portable solution from BAUER KOMPRESSOREN for reliable breathing air analysis – fully independent of location. Measures ...
Overview High-temperature furnaces can reach temperatures of up to 2800°C. Plansee offers shield packs made of refractory metals to reduce heat loss and protect furnace internals. Side, top and bottom shieldings are available and can be manufactured ...
... Product Overview
Lightweight caution sign is 2-sided for effective multilingual safety communication and utilizes ANSI/OSHA-compliant color and graphics.
Features and Benefits
- Light weight, versatile sign for effective
... Strong rare earth magnets keep small parts close at hand Breathable mesh interior for comfort Made of durable 1680d ballistic material Fits most wrist sizes Secure adjustable hook and loop closure Contoured for a comfortable fit around ...
Your patients are individuals. We understand that there is no one-size-fits all solution to ensuring their comfort and safety and that’s why we’ve developed five patient ID wristband solutions for optimum flexibility delivering error-free, accurate identification ...
This “shower cap style” protective cover is made from worldwide patented VpCI-126 4 mil film, and designed to protect exposed bare metal parts from corrosion during domestic and export shipments. VpCI CorrCaps are used by placing on the ends of electrical ...
... Features Packing rings (self-adjusting) with permanent spring-action for optimal, continuous contact with the seal disc, optical wear indicator Can be pressurized with buffer gas Optional dust extraction at the expansion joint Optional ...
... Description
Protective dustproof blind covers designed for USB female ports.
Available in pull-tab and no pull-tab variants to suit frequent or infrequent mating cycles.
Compatible with USB Type-A, Type-B, Type-C, Mini-USB, ...
... Product overview
The WS 01 warning sign indicates high-voltage hazards and the associated danger to life. Intended for safety marking in test and inspection environments.
Features
- Warning text: 'High voltage - Caution
Product description The contact protection prevents accidental contact with live connections. This safety-mandated accessory is plug-on mountable on existing relays and removable as needed. The transparent material permits visual inspection of ...
... Refractive index compensation for measurements in air is easily achieved with the Environmental Module. The Environmental Module (PS-EM) is an accessory product for the PICOSCALE. It monitors the environmental parameters such as temperature, relative ...
... Electromagnetic safety lock control with 936 N force and 100% stainless steel No power or under-voltage locking on machine casings Machine protection closing control for harsh environments Antimicrobial handle available Level of performance ...