Other connectors and accessories

The C.A 753 measurement adapter can be used for measurements in total safety on European 2P+E and Schuko sockets. Its design guarantees mechanical and electrical contact with all test probes (Ø 2 mm, Ø 4 mm, IP2x, etc.). The presence ...

All the connection accessories required for your oscilloscope in the field BNC (Bayonnet Nut Connect) connection technology is used for oscilloscope measurement inputs. Chauvin Arnoux and Metrix propose a wide range of BNC accessories. BNC/banana ...

The CA 6651 test adapter for electric vehicle charging stations is simple to use. It can be interfaced in series on the output of a charging station and allows you to access the various measurement points on a type-2 socket to perform ...

The NIVUS WebPortal is a comprehensive data management system for storage and provision of measured data. Thanks to storage on the web portal there are versatile options available to analyse readings, for system verification, data forwarding ...

The Car Measuring Device is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This adapter can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to ...

Electromobility is playing an increasingly important role. An important point here are the charging stations for electric vehicles. Special measuring devices are needed to check the function, protective devices and insulation of permanently ...

Sensata Technologies provides circuit-on-demand from a pre-wired power bus. The Airpax™ modular distribution system utilizes "plug 'n play" capabilities to simplify the design of your power bus system. The module design simplifies ...

The CPL1 and CPL2 external quadripoles are designed to connect the MPD 800 partial discharge measurement device to a capacitance (coupling capacitor or test object), which generates a reactive current larger than the current that can ...

Precision shunts for current measurements C-Shunt 1 and C-Shunt 10 are precision shunts for current measurements. They can be directly inserted into the binary/analog inputs of OMICRON test sets such as CMCs or COMPANO 100.

The LUMIMAX® Mounting Systems allow the direct mounting of the LED light to the camera serie SIMATIC MV440 and MV5x. The mounting variations can be individually adapted and expanded flexibly, so that exact matching of the lighting angle ...

The LUMIMAX® Mounting Systems allow the direct mounting of the LED light to the camera series Cognex InSight 5xxx, SIMATIC MV440 and Baumer Verisens XC. The mounting variations can be individually adapted and expanded flexibly, so that ...

COIL Adapter XTRA for Inter-Turn Short Circuit Test Adapter for inter-turn short circuit detection at inductances ranging from 10 µH to 5 H The coil adapter XTRA permits semi-automatic inter-turn short circuit measurements in combination ...

Test adapter for electric charging stations (single-phase, type 1) for PROFITEST Single-phase test adapter with type 1 plug for testing the effectiveness of protective measures at electric charging stations with the PROFITEST Master, ...

Single and 3-phase test adapter with type 2 plug for testing the effectiveness of protective measures at electric charging points with the Profitest Master. Simulation of fictitiously connected electric vehicles and simulation of current-carrying ...

The SC2/4/6 wireless communication module is a LoRa/GPRS/NB-IoT and RS485 transparent transmissin module, which supports 850/900/1800/1900MHz frequency band. It supports domain name acess, and automaticly reconnect when dropped. SC2/4/6 ...

EC2 (LoRa), EC4 (GPRS), EC6 (NB-IoT) modules can be used in combination with the multifunctional power meter PD194Z-E14 or PD194Z-E20 series to realize wireless transmission of grid data.

The BinCloud Gateway is used to flow data quickly and seamlessly in and out of a network. In an inventory management system, the BinCloud Gateway receives measurement data from level sensors and sends it to a control room, BinView, or ...

Rubber rings for GP coupling. Made in Italy rubber elements.

Specific rubber elements for centrifugal coupling. Made in Italy

The A 1722 PRCD Adapter is a multi-function test adapter intended for safety and functional testing of different types of 1-phase and 3-phase PRCDs. KEY FEATURES • Simulation of errors on input mains • Accessible Inputs/Outputs for ...

The A 1532 EVSE XA adapter is used for verification of electrical safety and functional testing of EVSE together with supported METREL installation testers. KEY FEATURES • Banana socket outputs for connection to a 3-phase installation ...

The A 1507 3-Phase Active Switch is an accessory intended for automating the process of electrical safety testing of three phase circuits. KEY FEATURES • Banana socket outputs for connection to a 3-phase system • Motor driven through ...

Length: 91, 105 mm

Most AvaSpec spectrometers are USB powered, but some users prefer to power their instrument externally. Avantes PS-12V and PS-24V can be used to connect your AvaSpec spectrometer and AvaLight light sources to any 100-240V power connection. The ...

Depending on the application field you can choose from different switching contacts: - tungsten-copper (WCu) contacts for arcing contacts in SF6 circuit breakers - copper-chromium (CuCr) for vacuum interrupters - tungsten carbide-silver ...

Customized spring contact piece - for battery contact and conduction HLC, a manufacturing enterprise specializing in the design, development and production of precision metal parts. Customizable assembly parts •Material: Steel •Process: ...

20+ years experience in metal parts field manufacturing,we are qualified with IATF16949, which is higher quality managerment system. The accessories we produced are widely used in the fields of electronics, electric device, communication ...

In this OEM electrical contacts project, we place great importance on quality management processes and strictly adhere to ISO13485 and IATF16949 quality management system standards to ensure accurate control at every step of the process.

Primary current: 70 A
Voltage: 1,500 V
Operating temperature: -40 °C - 125 °C

Orange plug: B-E57-P01-25-N01 Orange socket: B-E57-S01-00-NXX Black plug: B-E57-P01-25-A01 Black socket: B-E57-S01-00-NXX Rated Voltage: 1000V Rated Current: 80A，100A，125A Adaptor diameter：10mm2，16mm2，25mm2 Insert at any angle ...

Primary current: 130 A
Voltage: 1,500 V
Operating temperature: -40 °C - 125 °C

Orange plug: B-E57-P01-25-N01 Orange socket: B-E57-S01-00-NXX Black plug: B-E57-P01-25-A01 Black socket: B-E57-S01-00-NXX Rated Voltage: 1000V Rated Current: 80A，100A，125A Adaptor diameter：10mm2，16mm2，25mm2 Insert at any ...

Primary current: 210 A
Voltage: 1,500 V
Operating temperature: -40 °C - 125 °C

Orange plug: B-E80-P01-50-N01 Orange socket: B-E80-S01-00-NXX Black plug: B-E80-P01-50-A01 Black socket: B-E80-S01-00-NXX Rated Voltage: 1500V Rated Current: 120A，150A，250A Adaptor diameter：25mm2，35mm2，50mm2 Insert at any ...

The shunt is a passive component allowing DC current to be measured. When the shunt is calibrated with precision within a 0.2% accuracy class, measuring the voltage drop between its two terminals enables to calculate the exact current ...

1. Applicable standards: GB / T 7676.1 ~ 9-1998 "Direct acting indicating analogue electrical measuring instruments and their accessories" GB/T5729-94 "Fixed resistors for use in electronic equipment" GJB/T360A-96 "electronics and electronic ...

Dual-Camera Coupler optimized for VIS splitting ratio 50/50. • Magnification: 1x • Adjustment range: ± 2 mm • Aperture diameter: 18 mm • Camera interface: C-mount • Sensor size: max. 1"

PG13.5 to PG13.5 adapter Material: 316L stainless steel