... Synchronize 1 to 96 guns (Bolt, Sleeve, G, or GI) with 0.1 msec resolution Simultaneous graphic display of all gun signatures Summed Sensor Timebreak detection Automatic Continuity and Leakage Testing on Solenoid and Sensor Lines The BigShot ...
... Trimble Earthworks Grade Control Platform for Dozers Helps new and veteran operators do things right the first time, and in less time, than ever before. Cutting Confusion. And the Costs That Come with It. The Trimble Earthworks Grade Control ...
Trimble Navigation - Construction Division
... The Signal & Power Transfer System is part of the wind turbine's electrical pitch drive system. Also referred to as "pitch rings", or "pitch control slip rings" or "hub slip rings", their purpose is to transfer power and signals to the wind turbine ...
... LTE Cat 1/2G Battery Mounted Tracker for UBI/Insurance Telematics 1.LTE Cat1 with 2G fallback 2.IP67 Waterproof 3.2-wire harness for ultra easy installation 4.Built in 6-axis motion sensor for driver behaviour monitoring and crash reconstruction 5.Supports ...
Queclink
The T80 Series Universal Turbine Controller is compact and powerful. It is specially designed for turbine generator sets and industrial trailer generator sets up to 15MW. Crafted with top-tier industrial-grade components and built to rigorous military ...
Hollysys
... Overview
The FRS-A automatic pre-moisturising unit is designed for used foundry sand immediately after sand/casting separation to prevent drying of the moulding material and to improve subsequent processing.
Operation and design notes
Water ...
... The optimized industrial module in a modern design for intuitive control of 6 degrees of freedom (6 DOF) by pushing, pulling, rotating and tilting the ergonomic handle. The SpaceMouse® Module is the ideal human-machine interface for controlling 3D motion ...
MEGATRON Elektronik GmbH & Co. KG
... Unbeatable small installation depth and the highest stability in its class The 844 series joysticks offer features normally only found in heavy-duty products, despite being a very compact finger joystick. For example, with handle "T" the 844 becomes ...
MEGATRON Elektronik GmbH & Co. KG
... Inherently RFI/EMC immune and most flexible in its class The 842 series joysticks offer features normally found only in larger joystick models, despite being a very compact finger joystick. Of particular note is the ability to configure the axes independently ...
MEGATRON Elektronik GmbH & Co. KG
... Overview
- The QY410 Plus is a marine automated steering system (electronic autopilot) designed for precise course keeping and integration with vessel navigation systems.
Key features
- Adaptive steering
... Overview
- The QYX GNSS Agricultural Machinery Automatic Driving System provides automated guidance and steering control for tractors and field implements, enabling precise path following and headland management.
Key ...
... Product name
- MX01 3D Machine Control System
Manufacturer
- Spatix
Technical specifications
- Model: MX01
- Main content language: English
- Function: real-time
Our ink control system (I-ICS) controls the concentration of color in the entire print run with a revolutionary system that goes beyond a simple viscometer. The result is a totally equal print run and when memorizing the working conditions it eliminates ...
... Eltex ACT-R The ELTEX ACT-R (Automatic Control of Tension for Rapier machines) is a stand-alone device designed to regulate the weft yarn tension to a constant and required value on a Rapier weaving machine. It is designed to be fitted after the ...
... Eltex ACT-G The ELTEX ACT-G (Automatic Control of Tension) is a stand-alone device. It will continuously monitor and control the yarn tension according to a reference setting tension point. The ACT-G is designed to be used on for example air jet ...
... Product Details
Tailored programming for each solid waste processing line enables one-touch startup, automatic fault alarm triggering, autonomous system operation, and real-time failure localization.
Characteristics / Technical Specifications
- Tailored
... AirLoc Wedgmount® accurate Levelers are a space saving device consisting of vault tensioning of the top and the end piece for a special lateral and longitudinal solidity. It offers quick and smooth setting within 1/100 mm precision with the help of ...
AirLoc AG
... AirLoc Wedgmount® accurate Levelers are a space saving device consisting of vault tensioning of the top and the end piece for a special lateral and longitudinal solidity. It offers quick and smooth setting within 1/100 mm precision with the help of ...
AirLoc AG
... AirLoc Wedgmount® accurate Levelers are a space saving device consisting of vault tensioning of the top and the end piece for a special lateral and longitudinal solidity. It offers quick and smooth setting within 1/100 mm precision with the help of ...
AirLoc AG
Rated power: 4,000 W
... METALIKA designed concrete block splitter which would be available to all manufacturers of concrete products. S-550 Concrete block splitter does not require big space, compact construction enables easy moving of the equipment. After the process ...
... METALIKA designed automatic equipment, complete automatic line for concrete block splitting. S-610-4-A is automatic line for splitting blocks and cubing station, on request cubing station can be automatic or semi-automatic Block splitter can split ...
... METALIKA designed concrete block splitter which would be available to all manufacturers of concrete products. S-610-D Automatic concrete block splitter does not require big space, compact construction enables easy moving of the equipment. After ...
Power: 0.1 kW - 10,000 kW
Operating pressure: 0 bar - 1,000 bar
Temperature: -100 °C - 400 °C
The design of the mixer / heat exchanger equates to a combination of a static mixer and a multitube heat exchanger in which a highly viscous product on the shell side flows through the static mixer. The advantages of these two distinct systems are aggregated ...
Power: 0 kW - 1,000 kW
Operating pressure: 0 bar - 100 bar
Temperature: -100 °C - 400 °C
Fluitec sterile equipment is specially constructed for the greatest possible separation between the primary and secondary media, with practically total dranage on the product side. Fluitec sterile shell and tube heat exchangers are therefore ideally suited ...
... • 7" colour touch display with simple user interface • Clear input and display of process parameters • Alarm display in plain text • Password protection • Statistics functions with operating hours counter and consumption counter • Language switching • ...
The KST32 is an ergonomically designed swiveling control chair which provides a high degree of comfort. The seating system ensures a comfortable posture and a healthy working position. The control stand is equipped with a memory system. Three seat positions ...
W. GESSMANN GmbH
... The Crane Driver`s Seat KFS14 is a static seat with ergonomically designed and provides a high grade of comfort. The Driver`s seat is equipped with roller-bearing swivel system. All adjustment controls are positioned ergonomically within easy access. The ...
W. GESSMANN GmbH
... The KST31 is an ergonomically designed swiveling crane control chair which provides a high degree of comfort. The consoles, mounted to the driver’s seat, swing with the seat. The consoles can be positioned to perfectly match any person by means of length, ...
W. GESSMANN GmbH
... PMW Series flat sheet netting provides excellent protection from impact or abrasion damage. Use as a separator for stacked parts during storage, handling and shipment Ideal as protective wrap for bulky items Unlike wood, styrofoam or cardboard, PMW ...
The Standard Line Plus series consists of a large selection of mobile and stationary wheel washing systems that are particularly suitable for use with high truck drive-through frequencies. These modern drive-through systems are based on more than 30 years ...
FRUTIGER Company AG
... The Standard Line Plus series consists of a large selection of mobile and stationary wheel washing systems that are particularly suitable for use with high truck drive-through frequencies. These modern drive-through systems are based on more than 30 ...
FRUTIGER Company AG
... The Standard Line Plus series consists of a large selection of mobile and stationary wheel washing systems that are particularly suitable for use with high truck drive-through frequencies. These modern drive-through systems are based on more than 30 ...
FRUTIGER Company AG
... FOR APPLICATIONS FROM 1.5 TO 120 t The undercarriages with steel tracks, designed for earthmoving equipment, are ideal for heavy vehicles and difficult terrain. They can be equipped with rubber track pads for even the most delicate surfaces, lifting ...
Gemmo Group s.r.l.
... FOR APPLICATIONS FROM 1.5 TO 120 t The undercarriages with steel tracks, designed for earthmoving equipment, are ideal for heavy vehicles and difficult terrain. They can be equipped with rubber track pads for even the most delicate surfaces, lifting ...
Gemmo Group s.r.l.
... FOR APPLICATIONS FROM 1.5 TO 120 t The undercarriages with steel tracks, designed for earthmoving equipment, are ideal for heavy vehicles and difficult terrain. They can be equipped with rubber track pads for even the most delicate surfaces, lifting ...
Gemmo Group s.r.l.
API Heat Transfer's line of Airtech and Covrad air cooled all-aluminum brazed bar and plate heat exchangers are supplied as a vital component to our mobile and industrial OEMs' products. Our flexible bar and plate construction allows countless core combinations ...
... CHARACTERISTIC - Weight UNITS METRIC - 1.0 kg ...
DELEKS
... Lombarda Ingranaggi® GR10 Hydraulic Rotator 1Ton. Lightweight cost-effective solution suitable for ATV (All Terrain, small agricultural and forestry Vehicles). ROTATION Unlimited MAX. AXIAL LOAD STATIC 10 kN (2250 lbf) MAX. AXIAL LOAD DYNAMIC ...
DELEKS
... Lombarda Ingranaggi® GR-30 Hydraulic Rotator 3Ton. Lightweight cost-effective solution suitable for ATV (All Terrain, small agricultural and forestry Vehicles). ROTATION Unlimited MAX. AXIAL LOAD STATIC 30 kN (6744 lbf) MAX. AXIAL LOAD DYNAMIC ...
DELEKS
... is a Power shuttle transmission specifically designed for industrial applications requiring quick directional reversing and smooth clutch engagement. The powershift transmission consists of a hydraulically activated gear unit, the forward and reverse ...
Transfluid
... is a multi-speed power shift transmission available in one, two or three speeds forward and one or two speeds reverse. Designed for industrial applications it provides quick and smooth reversing and easy gear selection on the go. Consisting of a double ...
Transfluid
... industrial hybrid system by TRANSFLUID is made up of the following TRANSFLUID products: SAE multi-disc clutch system, to connect and disconnect the internal combustion engine Solenoid clutch-control valve Power shift with SAE B power take-off Electric ...
Transfluid
Dawson Construction Plant has developed an industry leading, robust and simple, electroniccontrol system that constantly monitors the drop weight position. This constant monitoring allows the switching timing on the main hydraulic spool to be trended ...
The PRIMIX spiral shaped mixer element is the basis of the heat exchangers which can be used for the inline heating and cooling of products. Because of the sophisticated construction, the PRIMIX heat exchanger takes a unique position between the current ...