Available for M04-M36 It is advisable to use a stop sleeve for optimal damping stroke adjustment. In this process, the end stop and the damping stroke can be adjusted individually by screwing the sleeve on the shock absorber external ...
The Styrocut C250 Electronic is perfectly suitable for cutting polystyrene hard foam plates with a thickness of 250 mm. Order No. 5201260 Scope of delivery: 1x blade 200mm length 1x blade 250mm length 1x cutting guide incl. stop 1x ...
M12x14, complete with M12 mounting. Body is made of case-hardened steel and blued. Clamping hook is made of case-hardened steel and blued. Tightening torque 75 Nm. Mounted using strength grade 10.9 screws. The mechanical side clamp ...
OML
Made in Italy Simex consistently meets users’ demands, delivering them the best solutions to solve even the most complex application challenges. The PL SG planers for working under guard rails and PL RAIL planers for rail tracks are ...
Made in Italy Simex consistently meets users’ demands, delivering them the best solutions to solve even the most complex application challenges. The PL SG planers for working under guard rails and PL RAIL planers for rail tracks are ...
Plate Bevelers, Self Propelled, Portable - KBM-18® produce clean machined bevels with no thermal distortion on mild steel, stainless steel and aluminum plate from 1/4" (6.0 mm) to 1 1/2" (38.1 mm) thick. Thinner material can be beveled... ...
Length: 150 mm - 3,000 mm
Manufactured to DIN 866/2 these round ended steel rules start their graduations on the left edge. The top of the rule is graduated in inch readings 1/16", 1/32" and 1/64". The bottom is graduated in metric readings of 1/2mm and 1/1mm. Features • ...
Manufactured to DIN 866/1 the gauging surfaces have been precision ground. The clear and easy to read metric graduations start 5mm in from the ends. Features • Manufactured to DIN 866/1 • Manufactured out of spring steel.
OPTIMAL ON-SITE STORAGE CNC bench stands from LISTA are available either as preconfigured models or as custom configurations. They can be supplied with screwed-in insert frames or supplied for tool-free mounting of tool cradles. ...
The skiving machine type CSM07-S processes paper and cloth narrow belts. Even though ideal for narrow belts, the machine can be equipped to work also wide belts. CSM07-S is indicated for converters with medium-high productions. Technical ...
Biko Mecchanica Srl
The skiving machine type CSM07-L processes paper and cloth narrow belts. Even though ideal for narrow belts, the machine can be equipped to work with wide belts. The CSM07-L is indicated for converters with medium-high productions. Technical ...
Biko Mecchanica Srl
The skiving machine type TWIN is manufactured to process simultaneously both laps of paper and cloth wide belts. There is practically no limit to the joint length, therefore the twin line is the best solution for segmented belts processing. ...
Biko Mecchanica Srl
DESCRIPTION Zinc coated wall mounted hose holder for a proper suction-hose storage including wand and accessories holder. Weigth: 340g
Power: 40, 8, 25, 3, 5 W
Applications: Explosion protection to CENELEC、IEC、NEC. Can be used in Zone 1 and Zone 2 Can be used in Class l, Zone 1 and Zone 2 Can be used in Class l, Division 2, Groups A, B, C, D Incandescent lamps: Max.60W; LED: Max. 8W Handle ...
SDDJ provides One-Stop CNC Solutions: Precision, Efficiency, Trust! ★High-Strength Material ★Ergonomic Design ★Strong Durability
SDDJ provides One-Stop CNC Solutions: Precision, Efficiency, Trust! ★High-Strength Material ★Ergonomic Design ★Strong Durability Wrench for standard ER Collect Nut
LC-1 Tensile Test Sample Cutter LC-i Tensile Test sample Cutter cuts samples of plastic film, paper and so on in préparation for other tests, such as tensile. peeling, tearing and heat sealing etc. It is compactty structured and easy ...
Sample Cutter for Tensile Tester to cut samples of various plastic films, papers and other materials LC-1S sample cutter specially used for tensile machine testing is used to cut samples of various plastic films, papers and other materials ...
MFA1T is designed to lift, lower and re-alignment of misaligned flanges with aligning force of 1.0t ( 10kN). It is mechanically operated using crank handle. These tools are often used alongside spreading wedges in common installation, ...
MATCH s.r.o Flange Service Tools
MFA4T is designed to lift, lower and re-alignment of misaligned flanges with aligning force of 4.0t ( 40 kN). It is mechanically operated using the supplied torque wrench. These tools are often used alongside spreading wedges in common ...
MATCH s.r.o Flange Service Tools
Designed for lifting, lowering and realigning misaligned flanges with an alignment force of 9.0t (90kN). The HFA9T is driven by an external hydraulic pump. Please note that the HFA9T does not include a hydraulic pump nor hydraulic hose. ...
MATCH s.r.o Flange Service Tools
EXTRACTION TOOLS FOR O-RINGS It is sometimes difficult to remove the seal, especially if it has suffered from chemical attack and has adhered to its housing. In order to facilitate its replacement, extraction tools can be used. The ...
A simple device that cuts quickly, cleanly and quietly, avoiding stress for the cattle (chainsaw, saw, etc.). Hydraulic dehorner operating with a double-acting cylinder controlled by a distributor. Extremely safe to use. Fast, efficient ...
Fiber segmented cutter is an auxiliary equipment in fiber laser, optical device and fiber sensing industry, which is mainly used to cut fiber with fixed length. Product Characteristics 1.It has the function of fixed length truncation ...
Pigtail Fixed-length Cutter is the supporting equipment of fiber laser, optical device and fiber sensing industry, which is mainly used for fiber pigtail fixed-length cutting equipment after fiber splitting. Product Characteristics 1.It ...
This metal pipe beveler machine is especially suitable for cutting thin-wall stainless steel pipe and pipe elbow. • Beveling machine adopts high-power motor, strong power, can be able to cold cutting and beveling of various diameters ...
DESCRIPTION The manual edge honing device can be used to put the final finish on the cutting bevels of paper knives and veneer blades. The honing action is performed by 4 rotating Arkansas stones (a natural material). The device ...
Easy to use, it sucks through a blower, coupled to the machine, which creates the vacuum inside the aspirator and sucks the liquid outwards and perfectly dries the treated surfaces. The machine is entirely built in stainless steel ...
The cutters are designed to precisely cut samples out of various materials such as fabrics, fleece, knitted fabric , foil or paper. For determination of weight in g/m². The max. cutting thickness of the circular cutters correspond ...
Circular saw blade diameter: 100, 200 mm
The edge of the saw blade is made of diamond material, which has high precision and long life. Special for precision cutting of carbide, ceramic materials, optical glass and other brittle Metal Materials Diamond blade (edge plating) The ...
Die Head for Water Cooling Strand Pelletizing Extrusion Line We have different types of die head in strand pelletizing line, also, we can customize special die head according to your drawings. 1. Duxplex working position non-stop ...
Power: 10 W
LED work lamp ideal for professional vehicle lighting applications. The super bright Epistar LEDs allow using the device LWL 10W 5LED for over 30000 hours drastically reducing maintenance costs and enhancing energy savings. KEY CHARACTERISTICS VOLTAGE 10/30V ...
SIRENA S.p.A.
Power: 18 W
LED work lamp ideal for professional vehicle lighting applications. The super bright LEDs allow using the device LWL 18W 9LED for over 20000 hours drastically reducing maintenance costs and enhancing energy savings. Voltage 9/60V DC ...
SIRENA S.p.A.
Power: 18 W
LED work lamp ideal for professional vehicle lighting applications. The super bright Epistar LEDs allow using the device LWL 18W 6LED for over 30000 hours drastically reducing maintenance costs and enhancing energy savings. KEY CHARACTERISTICS VOLTAGE 10/30V ...
SIRENA S.p.A.
Hydraulic light alloy sleeve cutter Hydraulic press for cutting anchoring and junction sleeves in less than 10 minutes. Delivered with a carrying case, a replacement knife, 1 operating and maintenance, a test certificate in conformity ...
Please specify:
Help us improve:
remaining