Modular structure fittings

Connecting clamps, technopolymer Standard components • MSX-B base: glass-fibre reinforced polyamide based (PA) technopolymer, black colour, matte finish. Fitting by means of a stainless steel M5 cylindrical-head screw with hexagon ...

CONNECTOR It consists of two parts made out of polyamide (PA) based tecnopolymer, black or grey colour, matte finish. REINFORCEMENT Zinc-plated steel or stainless steel (STC-SST). COLOUR Black or grey, matte finish. STANDARD ...

Diameter: 10 mm - 18 mm

MATERIAL Aluminium, matte finish. AISI 304 stainless steel screws and nuts. STANDARD EXECUTIONS - GN 131-BL: natural aluminium. - GN 131-SW: aluminium, epoxy resin coating, RAL 9005 black colour. FEATURES AND APPLICATIONS The ...

Diameter: 10 mm - 18 mm

Ganter from Furtwangen provides a wide assortment of tube clamp connectors, clamp mountings and linear actuators. These tools are all mainly built out of stainless steel and aluminum. Its tube clamp connectors provides a solution for ...

Diameter: 20 mm - 50 mm

The clamping bores of the two-way connector clamps GN 133 are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The standard clamping screws are socket cap screws DIN ...

Diameter: 30 mm - 40 mm

The clamping bores of the two-way connector clamps GN 135 are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The square designs are also suitable for use in profile ...

Benefits Fast assembly Easy to disassemble High tensile strength Conduit retained by rib No loose parts Application range In combination with protective conduit SILVYN® RILL PA 6 SILVYN® RILL ...

Benefits Fast assembly Easy to disassemble High mechanical strength Conduit retained by rib No loose parts Application range In combination with protective conduit: SILVYN® FPAS Fastening of ...

Material: Cast aluminium. DIN 7984 screws and DIN 985 nuts, steel. Version: Vibratory ground. Screws and nuts electro zinc-plated. On request: Clamping levers for tightening.Accessory:- Round and square tubes K0493

Material: Thermoplastic. DIN 7984 screws and DIN 985 nuts steel. Version: Black. Screws and nuts electro zinc-plated.Note:The standard size for round tubes is Ø18 mm or Ø30 mm. Use reducer sleeves K0492 if smaller tubes are to ...

Diameter: 30 mm - 40 mm

Material: Stainless steel, investment cast 1.4308. Screws, stainless steel A2. Version: Electropolished. On request: Clamping levers for tightening.

Diameter: 40 mm

The RV-BR tube connectors in this product series can be used for various applications in the industry and come with a design that adds durability. In terms of the material, the chill casting is made of a high-quality aluminum alloy, which ...

Diameter: 30 mm

Tubular connectorss RV Material: Chill casting of high-grade aluminium alloy in accordance with DIN 1725. Surface treatment: - Rough state - Drum polished - High-gloss polished - Vibratory ground, dull finished and technically ...

Diameter: 30 mm

Tubular connectors RV are made up of chill casting high-grade aluminium alloy that passed the DIN 1725 requirement. It has a rough state, drum and high-gloss polished. Furthermore being powder-coated, it also has vibratory ground, dull ...

Diameter: 30 mm

Ball connector Ø30 type I with rotation lock Material: Die-cast aluminium. Mounting parts steel. Version: Bright. Mounting parts electro zinc-plated. Note: Suitable for round tubes and profile tubes with 30 mm OD. For ...

Diameter: 12 mm - 50 mm

Tube clamps T-angle, aluminium Material: Cast aluminium. DIN 7984 screws and DIN 985 nuts steel. Version: Vibratory ground. Screws and nuts galvanized. On request: Levers for locking and other diameters. Accessory: - Round and square tubes 29050

Diameter: 12 mm - 20 mm

Tube clamps base, stainless steel Material: Investment cast 1.4308 stainless steel. Socket head screw ISO 4762 and hexagon nut ISO 4032, stainless steel. From ø30 mm hexagon head bolt ISO 4017, stainless steel. Version: Electropolished. Note: The ...

Flag holders / jointing sleeves Malleable cast iron EN-6JMB-350-10 with or without lug

Milling connector set ; for quick and stable connection of two aluminium profiles without profile machining. different sizes: - Profile 30, 40, 45 - profile groove 8 or 10 material: - Steel, zinc plated Set contents: 1 milling ...

Automatic connector with self-cutting thread; profile slot 5, 6, 8, 10, 12 for fast and solid connection of two aluminium profiles, assembly without machining Different versions - Cutting sleeve with assembly set for profile with ...

Plate connector (set); To tee and Length-connect two aluminum profiles different sizes: - Profile 30, 40, 45, 80 - profile groove 8 or 10 Material selection: - Die-cast aluminium blank or aluminium-color - Zinc die-cast blank ...

Diameter: 40 mm

Stainless steel mounting system - the alternative to welding! - Simple - assembly without special knowledge with only one tool - Fast - significant time saving due to assembly of prefabricated components - Flexible - easy to assemble ...

Diameter: 40 mm

Innovative connection technology for stainless steel tube connectors! A clever stainless steel assembly system (EMS) for rack constructions in the food industry and in clean rooms Stainless steel is the standard material for installations ...

Diameter: 40 mm

Sleeves with adjustable joints make for maximum construction freedom With ITAS, the system for industrial stairs and working platforms, RK Rose+Krieger facilitates the assembly of everything from simple railings right through to complex ...

MayTec universal-connector Ther MayTec universal-connector allows: any desired position of profiles only one type for 0° and 90° position of cross bushing simple determination of the connector type minimisation of stock keeping

MayTec standard-connector The MayTec standard-connector allows subsequent front-sided mounting or dismounting in any location.

Diameter: 20 mm - 200 mm

Structure: Rubber body with fully embedded steel flanges Damping, movement compensation: Rubber-metal pipe connectors dampen noise and vibration caused by appli- ances, motors or pumps. Movement cannot be absorbed by these rubber- metal ...

MCN Series Y-connectors are designed to meet all connector needs with a variety of applications. Various sizes and materials are available from flexible PVC to more rigid polycarbonate. Popular tubing ID's are accommodated from 3/6" ...

Leveling on each side of stand Capacity: 2.000 kg Handles large enough to grip with a gloved hand Brake to lock loads for lay-out or fit-up Even pipe rotation through smooth roller wheels With the adjustable height from 80 cm to ...

Diameter: 20 mm - 60 mm

Use: orthogonal connection between two round bars. State of supply connector in aluminium alloy UNI 5076; 2 UNI 5931 socket head screws, 2 DIN 985 self-locking hexagon nuts in galvanised steel and 2 torque limiter spacers. Standard ...

Diameter: 20 mm - 30 mm

Use: connection of round bars parallel to the fastening plane. State of supply aluminium connector; 1 UNI 5931 socket head screw, 1 DIN 985 self-locking hexagon nut in galvanised steel and torque limiter spacer. Standard pack: 2 pieces. Tightening ...

Diameter: 10 mm - 60 mm

Use: connection of round bars at 90° with respect to the fastening plane. State of supply connector in aluminium alloy 5076; 1 UNI 5931 socket head screw and 1 DIN 985 self-locking hexagon nut in galvanised steel. Standard pack: see ...

► Spe­cial fea­tures In­te­grated vac­uum con­nec­tion Vac­uum (bar) -0.8 Com­pressed air con­nec­tion

Diameter: 8 mm - 10 mm

Diameter: 12 mm - 18 mm

Diameter: 20 mm - 50 mm

Diameter: 8, 12, 16 mm

Adjustable parallel clamp mountings VGP are made of drawn aluminum profiles and have a slitted clamping point machined by cutting methods. Adjustable parallel clamp mountings are used for fine adjustments of measuring or test setups. ...

Diameter: 20, 16, 15, 10, 12 mm

Swivel ball joint clamp mountings TGK are made of drawn aluminum profiles and have a clamping point machined by cutting methods. Swivel ball joint clamp mountings allow precise and stepless adjustment of the ball pivot within the swivel ...

Diameter: 10 mm - 18 mm

Cross clamps KK of die-cast aluminum or precision-cast stainless steel have slitted clamping points machined by cutting methods. The bores of the clamping points are offset in the plane and arranged at an angle of 90°. They receive typically ...

Diameter: 8 mm

PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the hydraulic field, pipe end closures, flange protectors, ...

Diameter: 30, 32, 20, 25 mm

PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the hydraulic field, pipe end closures, flange protectors, ...

PANOZZO SRL produces pvc and pipe fittings. Our catalogue in fact ranges from thread protection devices to plastic tube plugs and plastic tube caps, also including sealing plug for the hydraulic field, pipe end closures, flange protectors, ...

Cross Clamper - Set Screw Type The clamper joints 2 shafts with cross. Fix the shafts by hex socket set screws. It is superior in cost effectiveness. Convenient for adjustment of side guide and sensors of the conveyance line. Light aluminum ...

A clamper that joints 2 shafts at any angle. Clamping type for one side. Mounting shaft, removing shaft and angle adjustment are easy. Moreover this does not scratch the shaft. Convenient for fixing of side guide and sensors of the conveyance ...

The clamper joints 2 shafts with T-shaped cross. Clamping Type. Mounting shaft and removing shaft are easy. Moreover this does not scratch the shaft. Space-saving layout is possible. Convenient for fixing of side guide and sensors of ...

Diameter: 10 mm - 54.5 mm

Connectors FLEXAquick for ROHRflex corrugated plastic tubings Plastic connector, quick-type, straight, metric outer thread, integrated snap-in sleeve with sealing, high density Material PA plastics Temperature -40°C ... +120°C Protection ...

Diameter: 10 mm - 54.5 mm

Connectors FLEXAquick for ROHRflex corrugated plastic tubings Plastic connector, quick-type, straight, metric nickel-plated brass outer thread, integrated snap-in sleeve with sealing, high density, EN 45545-2 (HL3) Material PA plastics ...

Diameter: 13 mm - 54.5 mm

Connectors FLEXAquick for ROHRflex corrugated plastic tubings Plastic connector, quick-type, straight, metric nickel-plated brass outer thread, integrated snap-in sleeve with sealing, strain relief, high density, EN 45545-2 (HL3) Material ...

Diameter: 3 mm - 15 mm

X tubing connector, four-way connector to connect hoses. - PP, Temperature resistant up to +135°C max. - PVDF, Temperature resistant up to +160°C max., highly resistant to chemicals - Sterilisable