Accelerometers with built-in electronics

Frequency: 10 Hz - 4,000 Hz

The Banner wireless vibration and temperature sensor measures RMS velocity, in inches per second or millimeters per second, and temperature. Mount it as close as possible to the bearings, using the standard bracket or the magnetic bracket, ...

Acceleration range: 20 m/s² - 98 m/s²
Frequency: 0 Hz - 800 Hz

Available in four versions (measurement range: ±2g or ±10g, mounting process: screw or magnetic), the BeanDevice® 2.4GHz AX-3D XRange is a wireless vibration sensor with built-in data logger. Characterized by a waterproof (IP67/Nema ...

Acceleration range: -40 m/s² - 40 m/s²
Frequency: 2.4 kHz - 5.5 kHz

MEMS DIGITAL ACCELEROMETER Three axes (X, Y, Z) Output signal: RS232; RS485; TTL Power supply voltage: 9~36V Impact resistance: 2000G Working temperature: -40°C ~ +85°C Storage temperature: -40°C ~ +85°C Excellent deviation stability, ...

Acceleration range: 2 m/s² - 40 m/s²
Frequency: 2.4 kHz - 5.5 kHz

MEMS Digital Accelerometer Three axes (X, Y, Z) Output signal: RS232; RS485; TTL Power supply voltage: 9~36V Shock resistance: 2000G Operating temperature: -40℃~ +85℃ Storage temperature: -40℃ ~ +85℃ Excellent deviation stability, ...

Frequency: 0 Hz - 40,000 Hz

Industrial accelerometers The RECOVIB® industrial accelerometers bridge the gap between the performance of laboratory accelerometers (which are often expensive, fragile and offer low protection) and the robustness of industrial accelerometers ...

Acceleration range: 245 m/s² - 981 m/s²
Frequency: 0 Hz - 10,000 Hz

Industrial Accelerometer (4-20 mA) The RECOVIB® industrial accelerometers bridge the gap between the performance of laboratory accelerometers (which are often expensive, fragile and offer low protection) and the robustness of industrial ...

Acceleration range: 19 m/s² - 58 m/s²
Frequency: 0 Hz - 1,000 Hz

Industrial Accelerometer (0...3V) The RECOVIB® industrial accelerometers bridge the gap between the performance of laboratory accelerometers (which are often expensive, fragile and offer low protection) and the robustness of industrial ...

Acceleration range: 49,033 m/s²
Frequency: 50 kHz

Accelerometers with KONIC sensing element, welded construction, miniature side or top entry coaxial connector and titanium case are available in three variants. Bonded isolation discs are included in the two adhesive mount variants (A/124/E, ...

Acceleration range: 9,807 m/s²
Frequency: 50 kHz

Features • Lightweight Design • Microdot Connector • Available from 1 to 250mV/g output. Applications •Modal Analysis of lightweight structures •Automotive •Aerospace •Impact Testing •Vibration Shaker Testing •Structural Testing •Auto/Aero ...

Acceleration range: 9,807 m/s²
Frequency: 28 kHz

Features • Microdot or TNC Connector • Lightweight Design Applications •Modal Analysis of lightweight structures •Automotive •Aerospace •High Temperature •Impact Testing •Industrial •Exhaust Testing •Turbo Charger Testing •Vibration ...

Acceleration range: 4,903 m/s²
Frequency: 1 Hz - 10,000 Hz

Frequency: 0 Hz - 1,000 Hz

Frequency: 0 Hz - 1,000 Hz

Acceleration range: 0 m/s² - 6,000 m/s²
Frequency: 0.2 Hz - 23,000 Hz

General Purpose Accelerometers Properties • Low-cost accelerometer • IEPE output • Includes electronic data sheet (TEDS) • For light test objects • Insulated case • M5 base thread • UNF 10-32 socket (Microdot) Sensitivity ...

Acceleration range: 0 m/s² - 60 m/s²
Frequency: 0.1 Hz - 4,000 Hz

High Sensitivity Accelerometers Properties • Suited for seismic measurement and building vibration, particularly at low frequencies • Extremely sensitive piezo system provides excellent resolution and lowest noise • KS48C with IEPE ...

Acceleration range: 0 m/s² - 6,000 m/s²
Frequency: 0.12 Hz - 33,000 Hz

General Purpose Accelerometers Properties • General purpose shear-type accelerometer • Two sensitivity versions • Low sensitivity to temperature transients • Low influence of base bending effects • IEPE compatible output allows ...