Articulated manipulators

Carrying capacity: 125 kg
Working radius: 2,800 mm
Maximale stroke: 1,400 mm

... constant 360° on the column and tooling axis – 300° on the intermediate axis Description of the Manipulator MANIPULATOR MICROPARTNER WITH ARTICULATED ARMS Thanks to the reduced ...

Carrying capacity: 250 kg
Working radius: 2,900 mm
Maximale stroke: 1,900 mm

... the column and tooling axis – 300° on the intermediate axis Description of the Manipulator INDUSTRIAL MANIPULATOR PARTNER PS WITH ARTICULATED ARMS The Manipulator ...

Carrying capacity: 500 kg
Working radius: 4,000 mm
Maximale stroke: 2,450 mm

... tooling axis – 300° on the intermediate axis Description of the Manipulator INDUSTRIAL MANIPULATOR PARTNER EQUO WITH ARTICULATED ARMS Pneumatic Manipulator PARTNER ...

Carrying capacity: 5 kg - 250 kg
Working radius: 2,500 mm - 4,000 mm

... system does not allow the load to be lifted if the required vacuum level is not reached (vacuum switch interfaced with the manipulator) • The correct vacuum level is also monitored by an on-board vacuum gauge (green ...

Carrying capacity: 80 kg - 320 kg

Liftronic® Pro Column Mounted with Articulated Arm Liftronic® Pro version Column + Arm is available in different configurations depending from the max load capacity, arm length and column height required for each ...

Carrying capacity: 80 kg - 320 kg

Liftronic® Pro can be supplied with an articulated arm fixed to the ceiling or to overhead rails. Overhead rail or ceiling mounted INDEVA® Liftronic® Pro with articulated arm. This solution is suitable ...

Carrying capacity: 65, 90, 155, 225 kg

The 700C Arm is a “banjo" arm consisting of three connecting linkages which allows the boom/balancer combination to cover a large area. The arm can fold into itself and articulate 270 degrees to reach around columns, posts or other interference ...

Carrying capacity: 65, 90, 155, 225 kg

The 713 arm is very useful in areas with limited space. It incorporates an over-under boom design with two linkages and two pivots. One pivot is between the mounting point and main boom and the other is between the two booms. Each pivot ...

Carrying capacity: 65 kg

Ideal for lightweight parts that require the operator to work directly under the arm, the 720 arm incorporates an over-under boom design with two linkages and two pivots. One pivot is between the mounting point and main boom and the other ...

Carrying capacity: 1 kg - 100 kg

ROVER MANIPULATOR allow to lift, move and rotate your particulars with weight from 1 to 100 kg with the utmost simplicity thanking to an ergonomic system, easy to be used. In order to the type of handling, rover manipulator ...

Carrying capacity: 1 kg - 50 kg

ROVER MANIPULATOR allow to lift, move and rotate your particulars with weight from 1 to 50 kg with the utmost sempliciity thanking to an ergonomic system, easy to be used. In order to the type of handling, rover manipulator ...

Carrying capacity: 1 kg - 46 kg
Working radius: 100 mm - 1,942 mm
Pressure: 5 bar - 8 bar

Easyarm manipulator EAM02 is a double articulated arm system that allows to move / rotate parts of various types, shapes and materials

Carrying capacity: 100 kg
Working radius: 500 mm - 2,700 mm
Maximale stroke: 2,700 mm

Intelligent lifting device which meets the highest standards of ergonomics, working environment, safety and efficiency. Unique integrated mechanical, electric, pneumatic swivel simplifies use and minimizes maintenance. Easy to use ...

Carrying capacity: 200 kg
Working radius: 500 mm - 2,700 mm
Maximale stroke: 2,700 mm

... is stopped immediately. Power supply 230V, 50-60 Hz, 1-phase with ground protection, 10A Stroke length 2,7 meter Hinged arm Arm profiles in Ultra High Strength Steel (UHSS) Standard lengths: 3, 4 and 5 m. Other ...

Carrying capacity: 75 kg
Maximale stroke: 2,700 mm

Intelligent lifting device which meets the highest standards of ergonomics, working environment, safety, and efficiency. Optimized to use in an industrial environment with high sanitary requirements and daily cleaning procedures, e.g. ...

Carrying capacity: 55 kg

... rope guided vertical stroke • appropriately sized according to the load • each machine is unique Like all ATISACER manipulators, ATISACER 55 is equipped with a double wire rope transmission system combined with ...

Carrying capacity: 60 kg

Suction cup manipulator for gripping and handling cartons With this manipulator even the most bulky cartons will no longer be a problem. Lift them up and move them with just one operator without ...

Carrying capacity: 260 kg

•swivel rigid arms •equipped with additional pneumatic cylinder •completed with custom gripping system Pneumatic manipulator with swivel rigid arms, is the higher capacity model of ATISMIRUS 100. Developed with the ...

Carrying capacity: 5 kg - 70 kg

Manibo pneumatic balancers are mainly used for rapid and frequent handling of loads in the production lines, in the loading and unloading of pieces from machine tools and the assembly of mechanical parts. The ability to handle loads in ...

Carrying capacity: 5 kg - 45 kg

Manibo pneumatic balancers are mainly used for rapid and frequent handling of loads in the production lines, in the loading and unloading of pieces from machine tools and in the assembly of mechanical parts. The possibility of handling ...

Carrying capacity: 5 kg - 70 kg

... without operating on the control levers. Better than any other pneumatic control during the movements of translation of the articulated arm thanks to its ability to transmit acceleration through the lateral traction of ...

Carrying capacity: 0 kg - 100 kg

Manipulator Arm is designed to facilitate relocation of loads from one place to another, which are too heavy for the worker or unsuitable for capture. Likewise, the Manipulator Arm can be used to carry ...

Carrying capacity: 0 kg - 150 kg

mobile with articulated arm • Mobile manipulator, similar to LiftCENT S, but it allows easy movement through the plant and between multiple operating points where the same or similar procedures are performed ...

Carrying capacity: 10 kg - 60 kg
Working radius: 2,500 mm - 3,000 mm
Maximale stroke: 1,600 mm

Supporter, generally utilized with a hook, can be equipped with simple gripping tools to allow the handling of lightloads in a weightless condition in any direction. The particular double arm structure and medium joint makes it easy to ...

Carrying capacity: 10 kg - 120 kg
Working radius: 3,000 mm - 4,500 mm
Maximale stroke: 1,800 mm

Transporter, generally utilized with a hook, can be equipped with simple gripping tools to allow the handling of lightloads in a weightless condition in any direction. The particular double arm structure and medium joint makes it easy ...

Carrying capacity: 10 kg - 180 kg
Working radius: 4,000 mm - 6,000 mm
Maximale stroke: 1,600 mm

Helpful generally utilized with a hook, can be equipped with simple and tailor made gripping tools to allow the handling of loads in a weightless condition in any direction. EEPOS aluminium rails makes easy to handle and gives precision ...

Carrying capacity: 0 kg - 2 kg

For precise, secure positioning of cameras, light sources or any other optical accessory in any environment, Opto jointed couplers are the ideal solution. Precision manufactured in Germany from high grade steel and aluminium, jointed ...

Carrying capacity: 0.3 kg - 5 kg

For precise, secure positioning of cameras, light sources or any other optical accessory in any environment, Opto jointed couplers are the ideal solution. Precision manufactured in Germany from high grade steel and aluminium, jointed ...

Carrying capacity: 5 kg - 800 kg

... manufactured by Famatec, is a manipulator equipped with self standing base. It has a loading capacity of 150 kg and radius of 3,000 mm. This is used to pick, move and place the wheels quickly and safely. Additionally, ...

Carrying capacity: 5 kg - 800 kg

Companies that process MDF-panels, faced chipboards or insulated sandwich panels need high efficiency and high speed in the movement of products that often have large sizes and weights. Thanks to the manoeuvrability and flexibility of ...

Carrying capacity: 5 kg - 800 kg

... production, the processes on the line are performed without breaks because the operator can work autonomously and safely. The manipulator has a sensible and careful reaction to the movements in the different situations ...

Carrying capacity: 1 kg - 1,000 kg
Working radius: 3 m - 7 m

Our Flexi range of lift assists are a cost-effective alternative to a pneumatic or electric balancer. There are two product variants, pneumatic or electric. Both versions feature single hand operation with infinity variable speed control. ...

Carrying capacity: 50 kg

... correctional up / down movements. If you are looking for a solution to your handling needs, our ‘The Solution’ electronic manipulator is ideal for a range of industries – including, automotive, aerospace, pharmaceutical, ...

Carrying capacity: 1 kg - 1,500 kg

... simply float up and down using gentle hand pressure. This manipulator can be column mounted or overhead mounted onto a tracking system. Benefits: • Reduce labour costs as these manipulators can carry ...

Carrying capacity: 80 kg

COBOT 1A100 HANDLE EASILY Cobot 1A100 is the ideal system for handling loads. It’s a new generation collaborative robot, which offers exceptional fluidness and maneuverability features. Cobot 1A100 is strenght driven, by sensing the ...

Carrying capacity: 0 kg - 7 kg

COBOT 1A20 EASY AND INTUITIVE START-UP The 1A20 cobot is a vertical pusher assistant that facilitates insertion of pieces for clipsing operations or tool pushing tasks like drilling, screwing, tapping, deburring operations. In particular ...