Force: 5 tf - 35 tf
Opening: 520 mm
Stroke: 520 mm
E-FORM X2 is the most flexible of the range. As compact as a single automation allows you to deal with large and small production series. Each working station is independent, but supervised by a single controller. The use of electric ...
Meccatronica Automazioni S.r.l.
Force: 5 tf - 35 tf
Opening: 0 mm - 520 mm
Table width: 500 mm - 500 mm
E-FORM X1 is an agile solution with a compact design for forming small series, excellent for prototyping. Its dimensions allow for easy placement within the production area. The silence, derived from the exclusive use of the electric ...
Meccatronica Automazioni S.r.l.
Force: 196.1, 20, 40, 50, 80 kN
Opening: 0 mm - 550 mm
Stroke: 0 mm - 500 mm
E-FORM XL1, with a solid design and a large working area, allows for better ergonomics thanks to the generous dimensions of the plates that facilitate loading/unloading and cleaning of the moulds. Each plate houses n. 5 resistances for ...
Meccatronica Automazioni S.r.l.
Force: 490.3 kN
... produce atmosphère controlled automatic hot press according to customers requirements with different force capacity, measure and température. PRODUCT INFORMATION MSE Furnace is produced atmosphère ...
MSE TEKNOLOJİ LTD. ŞTİ.
Force: 294.2 kN
Opening: 150 mm
... ° C •*** Maximum press area diameter: 250 mm •*** Stroke distance: 150 mm •*** Adjustable pressing force of 0-30 tons, •± 30 kg force accuracy, •Temperature accuracy ± 2 ° C, •Ability to read continuously applied ...
MSE TEKNOLOJİ LTD. ŞTİ.
... are capable of operating at pressures up to 700 MPa. With controlled pressurization and decompression (either manual or automatic), products with uniform density and reduced internal stresses can be produced. Common ...
MSE TEKNOLOJİ LTD. ŞTİ.
Force: 250 tf
Type C Special Dimensions and Features Production Hydraulic Press PRODUCT EXPLANATION Standart Equipments Chrome Plated Cylinder Steel Welded Frame Automatic Control Unit Safety Cover and ...
Faruk Usta Hidrolik Pres Makina Sanayi Ltd. Şti
Force: 60 tf
Type Special Purpose Light Barrier Press PRODUCT EXPLANATION Standart Equipments Chrome Plated Cylinder Steel Welded Frame Automatic Control Unit Safety Cover and Light Barrier Two Hand ...
Faruk Usta Hidrolik Pres Makina Sanayi Ltd. Şti
Force: 100 tf
PLC Control Type C Special Production Hydraulic Press PRODUCT EXPLANATION Standart Equipments Chrome Plated Cylinder Steel Welded Frame Automatic Control Unit Safety Cover and Light Barrier ...
Faruk Usta Hidrolik Pres Makina Sanayi Ltd. Şti
Force: 880 kN
Opening: 196 mm
Max. pressure: 250 bar
The V1.32, also known as R32, it’s the first model produced by Neotecman. The innovative design and forging system creates a new tendency in the forging industry. Today, this model still offers a very especial and innovative solutions ...
Neotecman
Force: 980 kN
Opening: 200 mm
Max. pressure: 250 bar
PRESS PUNCHES - 3 horizontal PRODUCTION (empty) - From 500 to 3.600 parts/hour BAR DIAMETER - From 12 to 32 mm (From 0.47 to 1,26 in) BAR LENGTH - To 4.000 mm (To 2.65 lb) DIE DIMENSONS 205 x 205 mm This system ...
Neotecman
Force: 980 kN
Opening: 500 mm
Max. pressure: 250 bar
... weight. Moreover, Neotecman’s design is based in a double structure for press and furnace, that includes the assembly of a robot to offer a multiple billet positioning in the press, simetric billets, ...
Neotecman
Force: 50 tf
Stroke: 500 mm
Table width: 800 mm
Press technologies: electrical axis with high efficiency, speed, accuracy and dynamic movement Compact and easy integration into automatic cell Multilingual dialog and programming interface on a ...
Force: 8,000 kN
Stroke: 800 mm
Working speed: 5 mm/s
... big SMC parts requires automatic loading and unloading by robot. The cell composed by this press, robot and fence is a proper automatic line which allows a very good production rate. Characteristics • ...
Force: 200, 100, 150 kN
... that can be adjusted throughout the cycle. The press can be used alone, also communicating with other devices on the line via common data bus systems. in this way it is possible to control more than one press ...
Force: 100, 30, 60 kN
... that can be adjusted throughout the cycle. The press can be used alone, also communicating with other devices on the line via common data bus systems. in this way it is possible to control more than one press ...
... Our optional patented Floating Anvil Automatic System incorporates automatic standoff height control measuring the height of every part run in the system. A typical system consists of a Flex tool, Floating ...
Fancort Industries, inc.
Overall width: 890, 1,070 mm
Overall height: 1,600, 1,670 mm
... functions of pressing time,pre-steam,steam and vacuum result in high quality and consistent finishing. Revolutionary ergonomic automatic system requires no hand iron for seam opening.Perfect results on difficult fabrics. Tandem ...
Force: 50 tf
Opening: 136 mm - 1,000 mm
Stroke: 250 mm
Pressure regulator - • Two-speed hydraulic unit - - Maneuver by means of electric pedals - • Maneuver by means of two-hand controls - • Limit switches and anti-spinning system - • Motorised bedplate - - Special front opening 1500mm. ...
MECAMAQ, SL
Force: 300 tf
Opening: 300 mm - 1,500 mm
Stroke: 300 mm
Pressure regulator - • Two-speed hydraulic unit - • Maneuver by means of electric pedals - S Maneuver by means of two-hand controls - • Limit switches and anti-spinning system - • Motorised bedplate - S Special front opening 1500mm. ...
MECAMAQ, SL
Force: 100 tf
Opening: 1,200 mm
- Machines equipped with detachable folding tools to be used on other applications. - Said accessory can be installed on all machines with a double-acting cylinder. - Machines that include a folding accessory must have ...
MECAMAQ, SL
... centre: Prevents displacement of the garment on the machine (optional) Unloading device for left and/or right jacket front: Automatic unloading after pressing / Increases productivity (optional) Blowing device for lapel ...
VEIT
Force: 25 tf
Opening: 200 mm
Max. pressure: 0 bar - 250 bar
Press for the vulcanization of silicone rubber moulds with maximum diameter of 400 mm, automatic hydraulic pump and pressure stabilizer. This machine is equipped with a timer for the programming of ...
Force: 4.5 tf
Opening: 220 mm
Max. pressure: 10 bar - 220 bar
... innovative characteristics that ensure absolute precision, such as the dual digital thermoregulator, the digital gauge and the automatic recovery and pressure stabilizing system. Moreover, it is provided with a tempered ...
Rate (strokes/min): 210 p/min
... market needs. Our fully automatic sheet feed press includes sheet de-stacking, alignment table with safer and more accurate sheet feeding, higher outputs and an optional zero idle strokes version. ...
Rate (strokes/min): 140 p/min - 220 p/min
Stroke: 8 mm - 100 mm
Table width: 425 mm - 560 mm
... main and auxiliary feeding bars guides the strips into the press, without causing idle strokes. A roller ejector transports the skeleton-strip out of the press. A sensor automatically stops the press ...
Force: 300, 600, 1,000 kN
Opening: 200, 300, 400 mm
Stroke: 200 mm - 400 mm
... LabEcon series 300/600/1000 are especially designed for demanding applications and automated use. •2 column press frame: extraordinarily high parallelism and easy access to press area •extremely ...
Force: 50 kN - 5,000 kN
Opening: 100 mm - 1,000 mm
Stroke: 100 mm - 1,000 mm
... , platen sizes, heating sources, automatic venting cycle, cooling, condensor, chiller, control systems, vacuum chamber for preparation of samples in vacuum conditions (30-40 mbar), floating upper platen for lower press ...
Force: 150, 300 kN
Opening: 175 mm
Table width: 250, 200 mm
... Presses’ benchtop LabTop series – available with a press range is an automated hydraulic laboratory press, which combines the modest footprint of our manually operated LabManual machines ...
Two independently operating production units serving a common press station. Output at a 5-second press-cycle results in more than 500 pads per hour. Automatic short-cycle press, ...
Force: 3 kgf
... suitable for the transmission of multiple sets of single-process molds in the step-by-step molding process under the same press. Hydraulic streching + single-arm multi-station robot production line The UL 2-in-1 ...
Force: 3 kgf
... is from several servo motors . The encoder connected to the crankshaft of the press transmit angle signals to the control system to achieve synchronous movement with the press . 2. It has a misfeed ...
Force: 0.5 tf - 0.5 tf
Fully Configurable Servo-Electric Presses Available in 9 Standard Models. Standard Features: - Positional repeatability within +/-0.0005” - Force & positional feedback - Data acquisition measuring torque, force, position, & time ...
Beckwood Press
Force: 0.5 tf - 1 tf
Fully Configurable Servo-Electric Presses Available in 9 Standard Models. Standard Features: - Positional repeatability within +/-0.0005” - Force & positional feedback - Data acquisition measuring torque, force, position, & time ...
Beckwood Press
Force: 0.5 tf - 2 tf
Fully Configurable Servo-Electric Presses Available in 9 Standard Models. Standard Features: - Positional repeatability within +/-0.0005” - Force & positional feedback - Data acquisition measuring torque, force, position, & time ...
Beckwood Press
Servo Technology helps save energy and increase productivity
Roof Panel Crimp Curving Rollforming Machine is able to turn vertically automatically. Pressing system is designed meticulously to create steps which have high tensility and intact paint. Servo transmission for getting speed up to ...
YS51-Frame Type Punch Press This machine is suitable for molding of automotive interior parts and also can be used for cutting foam packaging. Large working table and excellent forming ability are the main characters ...
Force: 996.4 kN
Opening: 250 mm
... time: 1,4 sec. - Ø between pieces: 700 mm - Ø aluminium outer disc: 1.000 mm - The lower table has an automatic tumbling by the globoidal cam with cycles of 1,4 seconds.
Force: 6,000 kN - 40,000 kN
Stroke: 400 mm - 900 mm
Table width: 1,200 mm - 2,600 mm
... Over 1,000 recipes can be stored Configuration and monitoring of the press and automation (transfer and destacker) on the HMI itself Accessibility to automation and press maintenance displays Synoptic ...
Fagor Arrasate S.Coop.
Force: 5,000 kN - 32,000 kN
... switching of hydraulic cylinders. The press force ranges from 5.000 kN up to 32.000kN for either single or multiple slide presses (optionally with one or more bed cushion/s- and/or slide cushion/s). Larger press ...
SCHULER - MÜLLER WEINGARTEN
Force: 400 kN
Max. pressure: 30 MPa
Weight: 17,000 kg
Automatic Isostatic Press KDR400 is used for ceramic tray pressing; it is a KEDA self-dependent invention with internationally advanced technology based on experience of ceramics press ...
Max. pressure: 207 MPa
The Hiperbaric 20 HIP press is our smallest press for Hot Isostatic Pressing (HIP), a technology dedicated to processing and post-processing metals and other materials. It has been designed to combine ...
Hiperbaric S.A.
Force: 3,000 kN
Opening: 1,900 mm
Technical Data: Pressing area 3000 x 2000 mm Pressing Force 3000 kN Opening 1900 mm Max. temperature 200 °C Cooling no Mode of operation Downstroke
Langzauner
Force: 98.1 kN - 6,178.2 kN
HIDRALMAC is successfully producing c-frame presses since more than 22 years. Some of our customers have more than 200 HIDRALMAC presses of that type in use. C-presses can be manufactured depending on customers’ requests. Tailor-made ...
Please specify:
Help us improve:
remaining