Benchtop testing devices

... including torsion testing, creep under dynamic loading and special environments (hot/cold chambers). Key Features Compact and portable Monotonic to 300 Hz frequency response Simple test space adjustment Optional saline bath for ...

... ISO standards for materials and biomaterials characterization and long-term durability tests of materials, components and devices. The ElectroForce 3300 family includes two models; the ElectroForce 3310 provides 1000 N of maximum force ...

... to a minimum. With the quick test mode, all relevant settings are on one screen, ready to select and begin testing. Ideally suited for testing high and medium voltage circuit breakers in substation and industrial ...

... • Suitable for testing timing and travel on all circuit breakers with single interrupter per phase • Extremely easy-to-use and reliable • Two separate timing channels for measurement of auxiliary contacts • Analogue ...

... voltage and current output along with precision instrumentation for automatically testing single and multi-ratio CTs and VTs. When it comes to CTs, this instrument makes testing easy. It will directly connect to ...

... The PullTester 20 is an economical motorized benchtop device for measuring pull forces of crimp connections as well as ultrasonic metal welding connections. - Speed controlled motor for consistent pull rates - Simple ...

... PullTester 25 is a dual-range, motorized benchtop device for measuring pull forces of crimp connections as well as ultrasonic metal welding connections on a broader range of wires than single-range pull test devices. - ...

... PullTester 27 is a dual-range, motorized benchtop device designed to measure pull forces of wire crimp connections as well as ultrasonic metal welding connections on a wider range of wire than single-range pull test devices. ...

... BeDensi AR is meticulously crafted for precision in powder angle of repose testing. This measurement refers to the angle created by the sloping side of a powder cone under specific conditions and is a pivotal indicator of powder flowability. ...

... bonding agents, pigments, plastics, cosmetics, pharmaceuticals and many other products

... Application
This instrument is designed for testing the through-dry (surface-dry) state of paints, lacquers and similar coatings in accordance with ISO 9117 and EN 29117.

Principle of test
A ...

... acid tester is a fully automatic measuring instrument which adopts the extraction method to accurately detect the insulating oil acid value. This instrument can improve the working efficiency and test accuracy, and at ...

... the tester into an AC220V outlet. If using an external computer, connect the serial communication line properly. - Check all wires and connections, then switch on the tester and any external computer. The software interface ...

... test methods and can conveniently perform differential tests of three-phase transformers. Device Features And Technical Parameters - Operation mode: The device can be directly connected to a computer or desktop, offering ...

... mounting unit for laboratory or workshop use. It is ideal for integration with ATE systems, or simply for use as a convenient bench top tool. Pneumatic connections are available via either the front or rear panel to suit specific applications. ...

... aircraft to wide body passenger and freight aircraft. Provides pitot static air data validation, leak testing, fault-finding and avionics instrumentation testing. ...

... Portable three-channel flightline Air Data Test Set. Provides pitot static air data validation leak testing, fault-finding and avionics instrumentation testing. The two static channels in addition to a pitot channel make ...

... current sources for testing even high-burden electromechanical relays - High current amplitudes for 5 A relay testing - High accuracy and versatility for testing static and numerical relays of all types - ...

... production and type testing. Key features - Protection test set and universal calibrator in one device - Testing of all relay generations – electromechanical, static, numerical, IEC 61850 - Highly ...

... kinds of measurement devices, such as energy meters, transducers, PQ meters, and PMUs. Key features - Lightest multiple phase secondary test set in the world (8.7 kg/ 19.2 lbs) - Precise test signals for protection testing ...

... Device for an impact test at low temperature Device details: ■ Device and operation are according to the standard IEC 60811-506 (IEC 60811-1-4) point 8.5 ■ Case set offers all required weights for the ...

... Device for Cold Bend Test at low temperature Device details: ■ Device and operation according to the standard IEC 60811-504 ■ The complete set offers various spindles and cable guides with many diameters: Winding ...

... Hot Set Test and Heat Pressure Test ■ 2 in 1: device contains the Hot Set Test as well as the Heat Pressure Test ■ Robust and compact set including the device and an equipment case ■ Possibility to attach a thermometer ...

... 115,200 baud. Automatic output available up to 250 Hz. Includes Gauge Control Language 2 for full computer control. Mitutoyo (Digimatic): Serial BCD suitable for all Mitutoyo SPC-compatible devices. Analog: ±1 VDC, ...

... products, the ZT 120 Light series is 100% USP/EP/JP compliant. Compact entry-level device The ZT 120 Light series is the perfect entry-level disintegration tester with one or two motor-driven USP / EP / JP compliant ...

... On the ZT 320 disintegration testers series, the test stations (one to four) are driven individually. In order to guarantee outstanding quality and the highest ease of use each test station is controlled by its own keypad. After programming ...

... and is equipped with an integrated flow-through heater. Its newly designed, cable-free AirBasket makes disintegration testing with automatic determination of the disintegration time as easy and fast as possible. Its electronics compartment ...

... Composite Film Heat Sealing Analyzer With ASTM F2029 Testing Standard GBB-A Heat Sealing Analyzer is to test the température, pressure, and time for heat sealing of various film materials. widely used in industries of plastic films, ...

... International Packaging Test Equipment Tearing Tester international packaging test equipment tearing tester used to test the tear résistance of paper. ...

... Melt flow index measuring instrument / MFI / Material flow index tester Melt Flow Indexer (MFI) GBB-R The melt index tester GBB-R is a precision packaging material testing instrument ...

... stops prevents repeated adjustments of the measuring instrument at the work piece. The gages are available in various sizes and designs to fit diameters from 0.8 till 240 mm. Concentricity gage RPG ...

... of relay templates for various automatic testings. It integrated the unique functional testing of optical digital protection including the abnormal SV simulation, virtual terminal test, the optical power testing ...

... software has more than 30 testing modules for all kinds of relay testings, and besides, it can offer library for users to use different relay templates for fully-automatic testings. ...

... power to optical scanning head; 2. Change the pulse signal into different amplitude pulse signal to provide for other test equipment such as PW460 and PW336i, etc. 3. Convert pulse output method: single 5m pulse ...

... seeking a straightforward, efficient, and economical solution for their vacuum testing needs. Whether you're a small food producer or a lab needing occasional vacuum testing, the Model S Control System provides the reliability ...

... adjust vacuum level and testing duration. * Measurement units: mmHg, mbar. -> Customizable Recipes: * Capacity to store up to 16 personalized recipes for specific products. * Includes settings for vacuum level and testing ...

... flame height of the upper and lower burners, equipped with a flame height gauge. • Ignition device for convenient ignition of upper and lower burners prior to testing. • Standard copper disc calorimeter for calibration ...

... of materials which is possible to make an essential contribution to preventative fire safety and reduce the risk of fire in buildings. Electrical Burner Test Device consists of • France original electrical burner, ...

... The Speed of Spread of Flame Test Device, in accordance with NF P 92-504, is used to determine the reaction to fire behavior and speed of spread of flame for flexible and rigid building materials when exposed to a defined flame. The NF ...

... chemicals. To increase safety and reduce costs, we offer you our test kit series. Inside a sturdy plastic case are the reagents, accessories and instructions for use in different languages. The briefcase ...

... Features of DX-3000 Hall Effect Device: - Using plug-sample cards, easy to install; - One standard configuration can simultaneously measure two samples, and 4 samples can be measured simultaneously by adding optional devices; ...

... rare earth permanent magnet material quality test device uses a fluxmeter to configure a one-dimensional Helmholtz coil, which is mainly used to measure the magnetic flux of the permanent magnet device under the condition ...

... Core Loss Tester


DX-30SST core loss tester is used to measure the mass specific total loss Ps and magnetic induction Bm of oriented and non-oriented silicon steel sheets.
It adopts a small-scale magnetic ...

... with traditional testing methods while facilitating specialized tests such as three-phase transformer differential testing and fast bus transfer / automatic transfer tests for auxiliary power systems.

... affect the experimental results.

... convenient for users to quickly and intuitively view the inspection data and results -Support multi-method testing to achieve multiple testing requirements Test Principles The preconditioned specimen is heated and ...

... Coefficient of Friction Tester is applicable to determination of static and kinetic coefficient of friction of plastic films, sheeting, aluminum foils, paper, paper-plastic composite films, paper board, wooden material, brake pads, windshield ...

... integrated testing, no external accessories required -Equipped with pressure sensors for higher accuracy -High-speed and high-precision sampling chip to ensure test accuracy and effectiveness -Safety design such as over-voltage ...

... Thermal Deformation Vicat Tester Microcomputer-controlled thermal deformation and Vicat tester is designed to adapt to the rapid development of the plastics industry and to improve the research and testing ...

... Adhesive tape tester is used to test the tape adhesion time of the tape test piece in a hot and warm environment. It is suitable for the initial adhesion test of pressure-sensitive tapes, medical patches, self-adhesive labels, protective ...

It is suitable for the stickiness test of various tapes, adhesives, medical tapes, sealing tapes, labels, plasters and other products. Hang the test plate with the sample attached vertically on the test frame, hang the weight of the specified weight at ...

... TLC-200T Ferrite Steels Falling Sample Gap Sampling Machine This machine is a specialized equipment with the advanced domestic technology level, which was based on the actual needs of customers in accordance with the GB/T8363-2007 of the gap. Usage ...

... CMT-H series Pipe Ring Stiffness Testing Machine This machine is used for determination circular cross section stiffness of plastic and composite pipe, equipment with a special ring stiffness deformation measuring device, ...