... ESPEC offers two types of standard models: the space-saving PV vertical ovens and the PH horizontal ovens. Both provide horizontal airflow for even exposure to all samples. Control constancy as low as ...
Maximum temperature: 200 °C - 300 °C
This service-friendly capacitive humidity measurement system has features like 32Bit multicolor panel controller, a single hand operated lockable door with RS232 interface for data transfer. It works on low-power and complies with CE/EMC regulations. ...
CTS
Maximum temperature: 0 °C - 1,315 °C
... Batch furnaces are fired with either gaseous or liquid fuel, with preheated or cold air for combustion. The air may be preheated by either regenerators or recuperators. When the air is preheated by regenerators, the furnace ...
Maximum temperature: 104, 116 °C
... The BT Oven F21 is designed for determining the moisture content in tobacco and other materials. The device applies the drying cabinet method and is therefore a direct measurement method based on the weight difference between a wet ...
... and are available in boosters, ovens or combination systems. We use infrared solutions to cure powder and liquid coatings, and several other types of finishes and adhesives. Infrared Booster Ovens- These versatile ...
... in the intuitive controller software. Fully Modular System Configure the IR1 as a standalone curing oven, booster oven, or drying oven Supports Powder & Liquid Coatings Compatible with all ...
Maximum temperature: 5 °C - 250 °C
Capacity: 125 l
Width: 700 mm
... Universal oven for tempering, drying, aging and heating application in the laboratory. The IKA OVEN 125 basic dry covers applications in industry, schools / universities, research, quality control and science. Fast ...
IKA
Maximum temperature: 5 °C - 250 °C
Capacity: 125 l
Width: 700 mm
... Universal oven for tempering, drying, aging and heating application in the laboratory. The IKA OVEN 125 basic dry covers applications in industry, schools / universities, research, quality control and science. Fast ...
IKA
Maximum temperature: 50 °C - 320 °C
Capacity: 125 l
Width: 700 mm
... interior The generously dimensioned interior of the Oven 125 control dry is comfortably illuminated. A practical cable bushing at the rear of the device is provided as standard for measurements in the oven or in the ...
IKA
Maximum temperature: 50 °C - 250 °C
Capacity: 179, 66, 104 l
... throughout the chamber - ideal conditions for material testing and heat treatments. Control and display; the PID control is easy to use, and has a large display for optimal feedback to the operator. Timer function allows to turn oven ...
VWR
Maximum temperature: 0 °C - 300 °C
Capacity: 5 ml - 250 ml
Width: 400, 750 mm
... Overview
Introducing the Glass
Oven G-300, BUCHI’s all-in-one instrument for small samples. With interchangeable accessories, the Glass
Oven G-300 can perform distillation, drying, sublimation, and freeze-drying, ...
... AUTEFA Solutions HiPerTherm double belt oven system comprises of a modular design, adaptable to all drying and thermobonding needs. In the standard version the machine is equipped with the Bernoulli nozzle, a drawer nozzle system made ...
Maximum temperature: 20 °C - 1,000 °C
... Muffle Furnace up to 1000°C (1832°F) / Chamber size: 100 x 100 x 100 mm (3.9 x 3.9 x 3.9 in) / Built-in temperature controller / Acoustic alarm / PID control This compact Muffle Furnace is ideal for ...
Maximum temperature: 20 °C - 1,700 °C
... Muffle Furnace / High operating temperature up to 1700°C (3092°F) / High-quality MoSi₂ heating elements / Sintering, annealing, material tests / Programmable controller with up to 30 heating profiles The high-temperature Muffle Furnace ...
... General Information The VMK high temperature chamber furnace are classified into the three range of 1400°C, 1600°C and 1800°C models Types of Temperature : The three models in each temperature are bench mounted ...
TEMPSENS
Maximum temperature: 1,400, 1,600, 1,800 °C
... The VMK high temperature chamber furnace are classified into the three range of 1400°C, 1600°C and 1800°C models The three models in each temperature are bench mounted with side ways sliding door. The combination ...
TEMPSENS
Maximum temperature: 500 °C - 1,200 °C
... Muffle Furnace is box type heat treatment equipment used to change physical properties of samples at very high temperature. These laboratory furnaces are widely used in scientific experiments in the physics lab, rice ...
TEMPSENS
Maximum temperature: 5 °C - 300 °C
Capacity: 140 l
Width: 45 cm
... Overview
The LABWIT Back Heating
Oven ZXRD-A7140 is a 140 L forced-air drying
oven engineered for routine laboratory and industrial thermal processes. It supports glassware drying and sterilisation up to 300°C ...
Labwit Scientific
Maximum temperature: 5 °C - 300 °C
Capacity: 230 l
Width: 72 cm
... Product overview
LABWIT forced-air drying
oven model ZXRD-A7230, 230 L capacity. Designed for routine glassware drying, sterilisation and controlled heating processes including aging, bonding, curing, annealing, stress relieving, ...
Labwit Scientific
Maximum temperature: 5 °C - 200 °C
Capacity: 210 l
Width: 69 cm
... Overview
The LABWIT forced-air drying
ovens are designed for routine laboratory tasks from glassware drying and sterilization up to 200°C to controlled heating applications such as aging, bonding, curing, annealing, stress relief ...
Labwit Scientific
Maximum temperature: 300 °C - 1,200 °C
Width: 342 mm
Height: 424 mm
AOIP
Maximum temperature: 18 °C - 28 °C
Width: 60 cm
Height: 56 cm
... Overview
The ITL-M-17725 maintenance
oven is designed for use with large mercury fixed-point cells. Easy to operate, it provides plateaus of 8 to 12 hours and includes two auxiliary wells for thermometer pre-conditioning. The ...
AOIP
Maximum temperature: 45 °C - 140 °C
Width: 43 cm
Height: 30 cm
... Overview
The Oceanus 6 POTTS 580 calibration
furnace is a multifunctional temperature calibration unit covering from 45°C below ambient up to 140°C. It supports direct fixed-point calibration (ITS-90 fixed points) and comparison ...
AOIP
... The HS1 drying oven from FARRAÚS is an essential component within plasterboard production lines. It is crucial in environments where climatic conditions or manufacturing rhythms require artificial and controlled drying. Thanks to its ...
Maximum temperature: 1,000 °C
... 3117-200 | 1000°C Three-Zone Split Furnace for Low Cycle Fatigue Testing Features: 90mm bore diameter, 358mm overall height (furnace only) Three-zone split furnace configuration with durable embedded heating ...
Maximum temperature: 30 °C - 300 °C
... Heating ovens are heating devices of varying dimensions depending on the needs of a project. A thermal fluid boiler heats the radiators arranged inside the oven. The thermal insulation system of high density rockwool ...
... so-called heating loops in compartments arranged on top of each other. Depending on the required capacity and temperature, the kiln may consist of 1 - 7 heating compartments. To improve the shelf life, the fat-splitting enzymes are inactivated ...
Maximum temperature: 1,000 °C
Width: 40 mm
... smaller benchtop horizontal tube furnace of non-split-type uses multiple zone metal coil elements for heating. The furnace has a removable tube-shaped and vacuum-sealed temperature chamber of inner diameter ...
Maximum temperature: 1,000 °C
Width: 80 mm
... tube furnace of split-type uses multiple zone metal coil elements for heating. The furnace has a removable tube-shaped and vacuum-sealed temperature chamber of inner diameter 100 mm. The split-type design ...
Maximum temperature: 10 °C - 200 °C
Width: 300 mm
Height: 350 mm
... DHG-9030A drying oven is used for drying, baking, wax melting and sterilization in industrial and mining enterprises, laboratories, scientific research institutions, testing institutions, colleges and universities, etc. The inner ...
Maximum temperature: 600 °C
Capacity: 20 ml - 2,000 ml
Width: 1.5 m - 4.8 m
... High Quality Electric LPG Furnace Tempering Furnace Casting Annealing Furnace for Glass bottles glassware
Annealing
Furnace for Glassware
Customizable ...
Maximum temperature: 0 °C - 300 °C
Width: 85 cm - 155 cm
Height: 52 cm - 120 cm
... Industrial Oven for Silicone Rubber Post-Curing & Drying
Overview
This industrial
oven is designed for the precise post-curing, drying, and shape-setting of various silicone ...
Maximum temperature: 10 °C - 250 °C
Width: 120 cm - 150 cm
Height: 600 cm - 850 cm
... Precision Industrial Drying & Sterilization Oven
Product Overview
This precision industrial
oven is engineered for demanding thermal processing applications across multiple ...
Maximum temperature: 0 °C - 120 °C
Capacity: 7 l
Width: 620 mm
... Dental articulators or several flasks in a flask press can be polymerised simultanteously. Pressure, time and curing temperature are adjustible. The heating outside the stainless steel tank is free from wear and grants durability, facilitating cleaning ...
Maximum temperature: 0 °C - 1,150 °C
Capacity: 3.2, 5.2, 9.2 l
Width: 165 cm - 450 cm
... The laboratory furnaces of the RETOMAT series are specially designed for the precious metal and model casting technique. The RETOMAT MINI has a chamber size of 3.2 l. With the controller, you make the decision between ...
Maximum temperature: 1,150 °C
Capacity: 5.2, 9.2, 3.2 l
Width: 165 mm - 450 mm
... Description
The RETOMAT series laboratory
furnaces are engineered for precious metal and model casting applications. The RETOMAT MINI is offered with
chamber volumes of 3.2 l or 4.5 l. Users can choose between ...
Maximum temperature: 10 °C - 300 °C
Width: 45 cm
Height: 50 cm
... Application
This
oven is designed to evaluate thermal behaviour and pre/post-heating characteristics of wire and cable insulations and coated rubber specimens. Suitable for testing wire, leather, plastics, rubber, textiles and ...
Maximum temperature: 200 °C
Capacity: 90 l
Width: 61 cm
... Features
- Resistance-type silicon-tube pressure sensor; vacuum degree adjustable from 100 Pa to atmospheric pressure.
- Vacuum sensor provides direct vacuum measurement with stable performance.
- Power supply: AC 220V ±10% 50Hz.
Maximum temperature: 100 °C - 1,100 °C
Width: 30 cm
Depth: 45 cm
... 3. Electric furnace with special heat insulation measures, the external surface of the furnace temperature rise is small, energy saving and safe. Main technical parameter about the high temperature part: Installation ...
Maximum temperature: 1,400 °C
... machinery, refractory materials, new materials development, special materials, building materials. Technology parameter: Furnace size: 300*200*200mm Power: 9KW/380V Temperature: 1400 °C Temperature control accuracy: ±1 ...
Maximum temperature: 800, 1,000 °C
... Vacuum Annealing Furnace is suitable for heating and annealing soft magnetic materials in high temperature, high vacuum and strong magnetic field environments. The vacuum annealing furnace is a feedback-regulated heating ...
... The Drying oven is specially designed for your manufacturing process. These ovens are suitable for the production of automotive engineering, aerospace and electronic products, as well as the processing of various materials ...
SONACME Technology
... The Battery Lab Oven is specially designed for your manufacturing process. These ovens are suitable for the production of automotive engineering, aerospace and electronic products, as well as the processing of various ...
SONACME Technology
... The Drying oven is specially designed for your manufacturing process. These ovens are suitable for the production of automotive engineering, aerospace and electronic products, as well as the processing of various materials ...
SONACME Technology
the best suppliers