Speed: 30 m/s - 800 m/s
... Temperature: -5-70℃ Characteristic: 1) This series of stainless steel cylinder conforms to:Airtac standard 2) There is an adjustable buffers at the terminals of the cylinder except for mounted cushion. 3) ...
Ningbo Hi-Tech Smart Machinery Co., Ltd.
Stroke : 57 mm - 1,219 mm
... Double-acting Cylinders. Collor threads,plunger threads and base mounting holes for easy fixture (on most models). Baked enamel finish for increased corrosion resistance. Removable hardened saddles protect plunger during ...
GRIPHOLD ENGINEERING
Stroke : 500 mm
Speed: 0.18 m/s - 0.24 m/s
... motion with a high degree of safety are perfect for these drives. Typical applications include sheet metal bending, hydraulic cylinder replacements, conveyor tensioning, and scissor-lift table drives. Industries served include Material ...
Stroke : 8 m
... and improve the safety and performance of hydraulic systems with Eaton’s comprehensive line of NFPA-compliant industrial tie rod cylinders. With hydraulic, pneumatic and electrohydraulic types, these cylinders ...
SMS Hydraulic Ltd.Co.
Stroke : 50 mm
... Capacity: 5 ton Piston stroke mm: 50 Length mm: 0 Width mm: 0 Height mm: 0 Intrastat: 84678900 Weight kg: 1.35 Warranty: 0 Months ...
... TOP COVER & BASE PLATE: Steel, Painted ENCLOSURE & SHEET: Rubber FOR STANDARD LOADS OF: 80 to 300 kgf (176 to 660 lb.) APPLICATIONS: • INSPECTION EQUIPMENT • BUILDING FLOORS ...
Stroke : 50 mm - 1,500 mm
Force: 60 kN
Torque: 35 Nm - 45 Nm
... This is a new revolutionary product for high precision linear motion series. The best substitute for pneumatic cylinder and hydraulic cylinder. Application： Dynamic 3D 4D entertainment facilities ...
Suzhou Fengda Automoation Equipment Co., Ltd
... single acting bar cylinders with spring return. They have a maximum operating pressure of up to 700 bars, and can be mounted in any mounting positions. A wiper ring is integrated which helps to avoid corrosion, and pollution. These cylinders ...
Werner Weitner GmbH
... Cylinder tube, Hydraulic cylinder barrel, Hydraulic pipe (ID Honed & OD Chromed) For Telescopic Hydraulic/Pneumatic cylinder is used for Telescopic Hydraulic Cylinder, ...
Stroke : 31 mm
Force: 490 N
... workpieces.Value short cycle times through fast moving cylinders flexible use by a large number of available indexing bolts and optional configuration of sensors to detect the upper and lower position of the cylinder ...
Wörner
Stroke : 0.25 in - 1.25 in
... basic hydraulic cylinders in SAE ported styles Adjustable force ranging from "negligible" to maximum cylinder capacity, by adjusting the input pressure Designed for long life in high production applications. ...
Vektek
Stroke : 0.75 in - 3.75 in
... These 1 inch square cylinders are available with a standard inch bore size(s) of 3/4" to 3" bore. They are available in stocked lengths ranging from 3/4" to 3-3/4". Longer or shorter strokes are available by contacting Compact Automation ...
Compact Automation Products
Stroke : 8 mm - 200 mm
Force: 1.2 kN - 392 kN
... operating pressures. Various versions of hydraulic oil feed cover the whole range of applications. The HYDROKOMP block cylinders offer technical advantages in the area of the seal at the piston-rod end. A double hydraulic ...
HYDROKOMP
Stroke : 0 mm - 250 mm
Bore: 25, 32 mm
Pressure: 5 bar
... The hydraulic locking units type HLU have been designed specifically for amusement rides and temporary structures and can be tailored to the customer’s specific needs. They offer maximum safety for the shoulder bar, lap bar and abdominal ...
Stroke : 10 mm - 200 mm
Pressure: 1 bar - 10 bar
Rod diameter: 8 mm - 25 mm
... The pneumatic cylinders feature magnetic pistons and are available in the following versions: double-acting with fixed end position damping, double-acting with adjustable end position damping According to DIN 6432 ...
... Simply put, the master cylinder generates hydraulic pressure that is transmitted via the brake fluid to either the wheel cylinder, in drum brakes, or the brake caliper, in disc brakes. These cylinders ...
Rod diameter: 20 mm - 26 mm
Force: 4,000 N - 6,300 N
... locating cylinders to be ideally adjusted to suit the clamping task. Due to the small diameters, the spacing between the locating cylinders can also be reduced. The 3 clamping balls are mechanically released through ...
Stroke : 1 in - 2 in
Pressure: 0 psi - 250 psi
Force: 0.71 N - 0.79 N
... stress reversals and thus minimize stress raisers, a major source of early failure in cylinders. Dynamic lip seals have a U-shaped cross section. These Beswick cylinders are rebuildable, fit most standard mountings, are ...
Stroke : 0.15 in
Pressure: 0 psi - 250 psi
Force: 0.14 N - 0.15 N
... The 7/16″ bore air cylinder is available with 5/32″ stroke and features a spring return option. Force Factor: 0.150 in extension, 0.138 in retraction. Approximate Weight: 31g in brass. Weight will vary slightly, depending on configuration. Porting ...
Pressure: 7 bar
Force: 0.23, 0.37, 0.56, 0.76, 1.35 kN
... Link clamp pneumatic screw-on with flange Material: Body aluminum. Piston steel. Version: Body black anodised. Piston hard chrome-plated Note: Screw-in pneumatic link clamps with flange find use where low clamping forces suffice and where the ...
norelem - Éléments standard mécaniques
... Pneumatic cylinder DIN ISO 15552 standard cylinder Description Material: Cylinder tube: aluminium. Endcap: die-cast aluminium. Piston rod: carbon steel 1.0503. Piston and piston rod seal: polyurethane. Version: Cylinder ...
norelem - Éléments standard mécaniques
... DIN ISO 21287 pneumatic compact cylinder double-acting with magnetic piston Description Material: Cylinder tube: aluminium. End cover: die-cast aluminium. Piston rod: stainless steel 1.4301 (from cylinder ...
norelem - Éléments standard mécaniques
... The SKP-1 is our hydraulic cylinder with a quick coupling for up to 11 tons and 2,5 kg deadweight. We recommend operation with our ALFRA pump AHP-S or with our foot pump. Furthermore the pump is applicable with the AHP-M1, with the DSP ...
Stroke : 0 mm - 40 mm
Force: 4.5 kN
... Øxdepth [mm]: - 20H7 x 25 Ram Ø [mm] / Surface F [mm²]: - 50 DAF press cylinders are ready-to-use building blocks for plant and special machine construction. DAF press cylinders have a modular design and can be ...
Stroke : 30 mm
Bore: 150 mm
Pressure: 4.5 MPa
... Product overview
Hydraulic
cylinder 1305-150-67-SDC with through-hole for integration into industrial
hydraulic systems. Size: 150 mm (metric). The through-hole enables the internal passage of components or ...
Stroke : 25 mm
Bore: 130 mm
Pressure: 4.5 MPa
... Overview
Hydraulic through-bore
cylinder, model 1305-130-52-SDC, bore size 130 mm (metric). Designed for industrial
hydraulic systems requiring a through-bore configuration.
Key specifications
- SKU:
Stroke : 25 mm
Bore: 102 mm
Pressure: 4.5 MPa
... Overview
Hydraulic
cylinder with through-hole, model 1305-102-46-SDC. Nominal size: 102. Measurement unit: metric.
Availability & price
Out of stock
Price: $5,319.00 (USD)
Product attachments
- Catalogue
... pneumatic cylinder as the basic type BF cylinder, the cylinder diameter ψ40 ~ 200mm range, complete specifications. The BF separator cylinder is completely sealed, almost no air leaks, ...
Stroke : 25 mm - 3,000 mm
Force: 160 N - 12,270 N
ALPHA AUTOMATISMES Sarl
Stroke : 50 mm - 1,000 mm
Force: 150 N - 80,000 N
Speed: 0 m/s - 1 m/s
ALPHA AUTOMATISMES Sarl
Stroke : 50 mm - 1,000 mm
Force: 200 N - 7,900 N
Speed: 0 m/s - 1 m/s
ALPHA AUTOMATISMES Sarl
the best suppliers