Hydraulic pumps

Pressure: 280 bar

... reliability and reduced noise. The range of hydraulic gear pumps is available in single or multiple pump format and can be supplied with integral relief valve. These hydraulic gear ...

Speed: 6,000 rpm
Power: 2.2 kW - 30 kW

... Built to optimise the efficiency of hydraulic systems and minimise the footprint, the PMAC synchronous surface permanent magnet SPM or internal permanent magnet IPM motors with standard or silenced hydraulic pumps ...

... cu. In. (.32 gal) usable limit and weighs 82 lbs. The normal pump output volume is 31.3 cu. In. and the decibel rating 72dba running at 5,000 PSI at a separation of 2 ft. .This pump has a dump emphasize that permits ...

Pressure: 0 bar - 380 bar

... lowering knobs and levers control the release of fluid from hydraulic cylinders. A 600 mm steel handle with hand grip comes as standard so your pump is ready for immediate use. Interchangeable ...

Pressure: 0 psi - 2,600 psi

... Our range of solids-handling pumps is extensive. From our very portable 2” vortex flow pump to the big 12” high performance model, we have a pump to cover just about every job. These versatile ...

Pressure: 700 bar

... Momento offers two different sizes of electrical driven pumps and one model driven by compressed air. The pumps can be used with all torque tools in this catalouge. All pumps are delivered ...

... senses rupture in diagram is integrated in the pump. Whenever these pumps are to be used in hazardous areas, then it is possible to place the liquid head at a distance away from the drive side. Hydraulic ...

Pressure: 2,000 psi - 6,000 psi

... to travel to tank and relieves pressure on the outlet line. - EVERY HP IS TESTED for outlet check leakage, double or single pump action and relief setting. - OPTIONAL HORIZONTAL MOUNTING BRACKETS allows for horizontal handle actuation. SPECIFICATIONS ...

Pressure: 2 bar

... Specifications Driving : diesel or hydraulic or electric Suction height : 3 m Outlet presure : 2 b PDM1 : 300 l/mn PDM2 : 600 l/mn PDM3 : 1200 l/mn Description For desanding or for mud return during ...

... follows: up to 25MPa for gear pumps, 16MPa for vane pumps and 28MPa for piston pumps. The capacity for the gear pumps is up to 60cm3/rev and up to 100cm3/rev for the vane and piston pumps. ...

Pressure: 2,500, 3,000 psi

... properties. This new thrust block design also incorporâtes advanced bearings designed specifically for high pressure hydraulic pumps. This new bearing features a robust fluoropolymer PTFE wear surface that yields unsurpassed ...

Power: 28 kW - 118 kW

... level of the hydraulic fluid and the longer the service life of the axial piston unit.In order to guarantee the functional reliability of the axial piston unit it is necessary to carry out a gravimetric evaluation of ...

Pressure: 0 bar - 460 bar

... The Variable Displacement Pump with the highest pressure on the market From 40 cc/rot to 120cc/rot First of all, Variable displacement pump – VDP series from ABER is the right fit for the hydraulic ...

Pressure: 20, 700 bar
Weight: 2.3, 3.5, 6, 7 kg

... Automatic 10,000 psi overload-relief valve protects components in hydraulic systems and ensures safe operation. Also available as HAND PUMP SETS, which are supplied complete with: • Pump ...

... range you will find: •Gear pumps, •Oleodynamic vane pumps both with frontal coupling or with dragging belt, •Elettropumps. The wide range of displacements and capacities grants to provide the system with the right ...

Pressure: 160, 200 bar

... ultrahigh pressure pump, Carter series shaped gear pump, chopping machine pump, PTO pump, spiral geared pump, bidirectional geared pump, and multi-stage ...

Pressure: 10,000 psi
Flow rate: 3.52 l/min
Weight: 15 lb

... Air Hydraulic Single Speed Pump. When connected to your shop air lines, Zinko Hydraulic versatile air pumps can safely deliver up to 10,000 psi (700 bar) of hydraulic ...

... Description A range of gear pumps with aluminium body with flows from 0,5 to 2 L/min. at 1500 rpm. More information in the attached catalogue ...

Pressure: 700 bar
Flow rate: 0.7 l/min

... Air inlet pressure (bar*): - 7 ÷ 8 Maximum working pressure (bar*): - 700 Maximum rated flow (l/min)*: - 0,7 Air connection (standard): - 1/4″ GAS Oil connection (standard): - 3/8″ – 18 NPTF Max. weight without oil (kg): - 5,3 Reservoir capacity/usable ...

Pressure: 10,000 psi

... heavy duty pump made for multiple applications with full control over advance, hold and retract operations. The electric pump features a 10’ remote motor control with a low voltage starting potential ...

Pressure: 300 bar - 320 bar
Speed: 400 rpm - 4,000 rpm
Fluid temperature: -40 °C - 120 °C

... Application NEW DEVElOPMENT Pumps for mobile applications Electric-powered forklifts Diesel-powered forklifts Gas-powered forklifts 2Q-operation pump/hydro motor Decentralized high-efficiency low-voltage- hydraulic ...

Pressure: 310 bar
Weight: 6.9 kg

... application. Gear pumps All our standard gear pumps are BI-ROTATIONAL to optimize to stock levels and installation time, as standard they also feature leakage indicator system in line with leading gearbox manufacturers, ...

Pressure: 700 bar

... antislip pads which can be removed if the pump is mounted onto to a flat surface ; – 1/4” NPT gauge port for direct installation of a pressure gauge on the pump head. OPERATIONAL AREAS This pump ...

Pressure: 0 bar - 410 bar

... The PF 140 series horizontal triplex plunger pumps, are designed for pumping high pressure water, water emulsion and other fluids.* Thanks to their high reliability, PF 140 have applications in industrial areas demanding continuous ...

Pressure: 900 bar

... single pump head Pressure up to 900 bar Metering accuracy reaches 1% Full API 675 compliant Integrated “Oude” Worm gear pair, low noise, high transmission efficiency, large torque Low maintenance, long service life Plunger and ...