I/O

Application range (zones): 1, 2 Ex interface zone: 0, 1, 2, 20, 21, 22 Max. voltage Uo: 24.40 V AT_ST00589: no Highlights - Eight channels can be used individually as inputs or outputs Intrinsically safe Ex ia IIC inputs/outputs ...

... communication offering for H Series ISO and H Series Micro valves and is suitable for use with many PLC's. I/O options are digital and analog I/O, 16 / 32 solenoid control, short circuit protection on ...

Get multivariable outputs and a powerful configuration and maintenance interface in a convenient, easy-to-install package. This smart module provides fast access to flow, density, temperature and many other parameters. Features ...

... For use with Net2 triggers and actions feature About - The Net2 I/O board consists of 4 inputs and 4 outputs. It connects directly to a LAN/WAN via an onboard RJ45 connector. I/O boards can be distributed ...

... large number of serial I/O ports. Each channel supports RS-232, RS-485, and RS-422 electrical levels to interface to a wide variety of serial communications devices such as modems, data collection equipment, and distributed ...

The Eckelmann I/O system adapts to your application. From simple digital input, to analog modules, to special and safety modules for high-end applications, the UBM I/O system offers everything needed ...

Dedicated I/O expansion modules Various models available to I/O requirements Communications via CAN with Centurion™ controller Type J or K Thermocouples or 100Ω Pt 3-wire RTD temperature measurement ...

The Ixxat Safe T100/CS offers device manufacturers an easy way to control safe I/O signals using a safe fieldbus protocol. The module meets the SIL3 safety requirement level as defined by IEC 61508 and Performance Level ...

... • CANopen DS-301 V4.01 application layer A PC board-mounting card for adding I/O to a CAN distributed control network. The CAN-IPM-01 combines configurable digital I/O points with dedicated analog ...

... non-glass break). • LED indicator. • Full soft addressing, and rewriting through CODER-9001 encoder in site. The A9056T I/O module (A9056T for short) is used with SEC3002 fire alarm control panel. It is mainly used ...

-8 Inputs individually isolated to 500Vrms -Field to Logic Isolation of 1500Vrms -Plug-in Terminals for easy maintenance -Wide 90-150Vac/dc input operating range Omni8/16C 8 Channel Isolated Input Board. Inputs from 90 to 150V ac/dc. ...

Analogue signals are transmitted to the controller or supplied to the peripherals with the highest accuracy and interference immunity. A microcontroller converts the measured values of the analog inputs and outputs with the calibration ...

SimpleHome module with 5 optically coupled inputs (4 normal + 1 scenario), for connection of buttons in the vicinity of the electrical panel and 4 relay outputs with N.C./N.O. switching contact to control resistive electrical loads up ...

The Produal MIO 12-PT is an I/O module that is used for temperature measurement. It has the ability to read 4 Pt1000 or digital inputs and uses 4 analog outputs that ranges from 0V up to 10V. Each individual triac output ...

Kuhnke's FIO is a system of I/O modules for interconnecting the process signals in an EtherCAT network. It consists of the bus coupler and a range of I/O modules. The bus coupler converts the physical ...

... Remote I/O Module The SEL-2506 Rack-Mount Remote I/O Module has eight digital inputs, eight digital outputs, and a fiber-optic communications port. Connect an SEL-2506 to a fiber-optic port or transceiver ...

I/O-junction 8-way, with Connecting plug, M23x1 I/O-slot female, M12x1 Number of pins 4+PE Coding A Rated voltage 30V Current load (at 40°C) 2 A Total current load 12 A Insulation resistance ≥108 Ω Resistance 5 mΩ Ambient ...

The system comprises of 12 relay containing make and brake contacts. It also has 8 transistors for outputs and provides over voltage protection. It has a output current of 24V/2A or 48V/1A with a galvanic isolation of 1500Vrms. The ...

The 8012e Low Profile PCI Express digital interface provides eight optically isolated inputs and eight Reed relay outputs (SPST). The isolated inputs are non-polarized and rated for 3-30 VDC. Optical isolation protects the PC and other ...

... effective method of controlling up to 6 proportional hydraulic valves, or can be used to connect additional digital and analog I/O to a CANbus system.

Features DIN Rail or Panel mounted compact I/O modules Indication for Diagnostics, Power and Communication Adds I/O capability to your PLC, SCADA and Modbus networked devices Programmable inputs allow ...

The IA-2116-U is a tiny and intelligent 16 Relays module, powered and controlled by any USB port. The IA-2116-U provides both NO and NC (Normally Open and Normally Close) channels, while the relays common line is shared between 8 or 16 ...

... Together with I/O modules and a brain or rack-mounted controller, this rack forms an I/O unit that provides distributed control in a SNAP PAC System. The I/O unit can also be used ...

High-density isolated digital output card ●80-Ch. Digital Output ●PCI Express x1 compliant ●Keep digital outputs status after warm reboot ●Readable digital output signals ●Unique Board ID

... of the Z32 FlorenZ Series CNC and the peripherals (drives and I/O). Its connections are: RTE (Real Time Ethernet): connection to the central unit of the CNC Z-Link: optical fiber bus for I/O, analog ...