Lubrication pumps

Flow: 3 l/min
Pressure: 1.8 bar
Weight: 150 g

... series diaphragm pumps provide an unrestricted oil free flow of 3 l/min (0.1 cfm) for air and gas with maximum vacuum levels of 350 mbar abs (-650 mbar or 500 mmHg). Manufactured in the UK by Charles Austen Pumps ...

Flow: 15 l/min
Pressure: 0.15 MPa
Power: 150 W

... We are expanding our hydraulic pump portfolio to include electric pumps for cooling, lubrication and ventilation systems. This new pump family will employ a modular design with pumping ...

Pressure: 5 bar

... Positioned in the center of the installation compared to the two lines it allows to improve the length of the facility. It can be used with a single exit, another exit is closed by a special flip. Key features: - Output : 2 cm³ per full operation - ...

Pressure: 31 bar
Fluid temperature: 5 °C - 40 °C

... Lubricator is an automatic, robust and durable pump. Its compact size is designed to fit your space requirements and lubrication demands. The SureFire II Lubricator is a self-contained electric motor-driven ...

Flow: 1,500 m³/h
Pressure: 16, 35 bar
Head: 160 m

... A sump pump designed to EN 733 (DIN 24255), ISO 5199 - ISO 2858 / EN 22858, API 610 / API 682. Standardized and modular design Magnetic driven option Customized sump depths up to 10 m Re-producible optimized hydraulics ...

Flow: 170 l/min
Pressure: 8 bar
Weight: 12 kg

... Diaphragm pump in aluminum with cataphoresis treatment series AAB-1 with membranes in EPDM, balls and seats in acetal ...

Pressure: 0 psi - 2,321 psi
Fluid temperature: 5 °C - 40 °C

... The GPO Lubricator is a motor-driven gear pump that is designed for use with single line centralized lubricating systems utilizing progressive distributors or injectors. Standard features include: liquid level indicator, ...

Flow: 9.5 us gal/h - 114.3 us gal/h
Pressure: 45 bar - 225 bar

... The LK Series metering pump is the largest in the high performance line of pumps from Walchem. The LK is a motor-driven, mechanically actuated diaphragm metering pump with a maximum capacity of 114 GPH ...

Flow: 0 l/h - 2,700 l/h
Pressure: 0.3 MPa - 1.5 MPa
Power: 0.25 kW - 1.5 kW

... The result is the employed compact and rigid mechanism. An outdoor installation is due to the fully enclosed oil bath lubrication possible. Various Typs and material Fitting for nearly any application a various number ...

Flow: 9 m³/h - 11,356 m³/h
Head: 3 m - 609 m

... Pentair Fairbanks Nijhuis 7000 & 7100 Series Vertical Turbine Pumps Rugged and heavy duty, the Fairbanks Nijhuis vertical turbine pump is designed to successfully operate in a multitude of water sources from wells ...

Flow: 8,438 l/h

... series can be combined for process and metering pumps to achieve the required flow rate and pressure parameters. Features The NOVADOS Family comprises leak-free diaphragm pumps as well as plunger pumps. ...

Flow: 0 us gal/min - 12 us gal/min
Pressure: 0 bar - 7 bar
Weight: 3.9 kg

... double-diaphragm (AODD) pump for reliable use in lubrication, tire filling, adhesive dispensing, OEM systems and many more industrial applications. Featuring a patented non-stalling, lubrication-free ...

Flow: 0.02 l/min - 10.8 l/min
Pressure: 0.3 MPa - 1 MPa
Power: 0.2 kW - 0.75 kW

... resistance The pump liquid ends are made from high grade materials such as polyvinylidene fluoride (PVDF), carbon fiber reinforced polyvinylidene fluoride (CFRPVDF), ceramic, PTFE, and FKM. These chemical resistant components create ...

Flow: 0 m³/h - 80 m³/h
Power: 0 W - 3,000 W

... The FTP gear pump from Marzocchi is an ideal solution for low-pressure lubrication applications where low-viscosity fluids are required, such as fire-resistant ones. Typical applications include large lubrication ...

Flow: 7 l/min - 564 l/min
Pressure: 1 bar - 40 bar
Weight: 22 kg

... pow­er­ful - this is our new screw pump in­no­va­tion FLEXCORE. Not only can it be in­stalled in var­i­ous ex­ist­ing pip­ing sys­tem, it also im­presses with a broad ap­pli­ca­tion range. For the start of the new pump ...

Flow: 10 l/min - 180 l/min
Pressure: 0 bar - 16 bar

... Circulation, lubrication and transfer The Std Line (standard) LPE pump comes in two executions; Lube Line and Fuel Line. The main difference is the shaft seal design; (V-Seal) - optimized for light duty and (T-Seal) - ...

Flow: 0 m³/h - 2,000 m³/h
Head: 0 m - 400 m

... extreme conditions) • Reduced maintenance due to balanced axial thrust from impeller wear-ring and balance holes • Bearing lubrication by oil flinger as standard. Oil mist retrofit option available ...

Flow: 1.8 m³/h - 91 m³/h
Pressure: 14 bar
Fluid temperature: -15 °C - 175 °C

... The 1124A Series™ internal gear pump with O-Pro® Seal technology is the perfect solution for adhesives, starch, polymers, and more due to it's reliable sealing as well as easy maintenance. Features & Benefits Rugged design provides ...

Flow: 65 m³/h
Head: 10.9 m

... Transformer Oil Pump Product Overview The shell of hydraulic suspension pump is composed of motor shell, pump body, components of junction box and sealing ring.The protection class of the whole pump ...

Flow: 30 m³/h - 5,000 m³/h
Head: 10 m - 400 m
Power: 4 kW - 710 kW

... efficiency, energy saving, reliable and good suction performance. Guide vane type pump body, compared with pump casing type pump body, the radial force is eliminated to ensure that pump ...

Flow: 0.03333 m³/s
Head: 2 m - 42.5 m
Power: 1.1 kW - 12.5 kW

... Submersible pump, with oil bath motor, for cooling and lubrication of the bearings and a double mechanical seal, oil bath (motor side) and water bath ( pump side). Suitable for construction site drainage ...

Flow: 140 us gal/min
Head: 16.8 m

... KEY FEATURES Space-Saving Pump Design. No Maintenance with Enlarged Motor Bearings with High Temperature Lubrication. Universal Flange to Flange Dimensions Makes Replacement Faster and Cost Less. Quieter Operation ...

Flow: 0 m³/h - 400,000 m³/h

... applications
Lubretec pneumatic oil pumps are selected where safe, efficient lubricant handling is required:

• Automotive workshops – rapid dispensing of fresh oil
• Heavy industry – lubricant

Flow: 8 m³/h - 37 m³/h
Head: 7 m - 40 m
Power: 0.75 kW - 7.5 kW

... operation, the pump is refluxed and stirred, and mechanically crushed to prevent blockage. The YW pump is a single-stage single-suction, submersible centrifugal pump. The hydraulic components, bearing ...

Flow: 1 m³/h - 150 m³/h
Pressure: 1 bar - 20 bar
Power: 3 kW - 90 kW

... Gear pumps offer high durability and efficiency for transporting viscous materials, providing a reliable solution for various industrial applications. Below are the specific features and application areas of these pumps: Features: Inlet/Outlet ...