... The high-precision multi-parameter probes of the 36XW-CTD series measure the conductivity, temperature as well as the depth (pressure) of water bodies. Temperature dependencies and non-linearity are precisely compensated for by means ...
... The high precision 36XiW-CTD series multi-parameter probes measure the conductivity, temperature and depth (pressure) of water bodies. Temperature dependencies and nonlinearity are precisely compensated by means of a mathematical model ...
... Temperature PT100 probes are devices supplying, through a physical process, temperature measurement to the instruments to which they are connected. These products can be used also in particularly heavy industrial application. Head: ...
... Reduce the amount of manipulators • Select only the L- or X-Extension • Equip only a single manipulator with an Advanced Probe Holder • Temperature stage for the sample holder (-25°C to +160°C) • Add an optical microscope to obtain ...
SmarAct GmbH
... Benefits: Semi-blind operation in the SEM. Thanks to active position holding, low thermal drift and Point&Click functionality, probe positioning can be performed with minimal electron beam exposure, ...
SmarAct GmbH
... degrees of freedom. The system has the same robust design as the standard SMARPROBE and is fully compatible with the Advanced Probe Holder. The L-Extension is a closed-loop temperature control with multiple sensors. By adding this ...
SmarAct GmbH
... Mounting in zone 0 (gas) Mounting in partition wall zone 0 / zone 1 (gas) Compact design ...
... interval 1 year
Probe power: unregulated DC 10–25 V — first
probe approx. 850 mW @15 V; each additional
probe approx. 550 mW
Power supply: 110 VAC (US) or 230 VAC VDE-approved adapter
Measurement ...
... overview
Ami Polymer Pvt Ltd bellow
probe assembly is designed to address the needs of the single-use disposable and biopharmaceutical industries. The bellow
probe enables insertion of pH and DO
probes ...
... Robust and virtually maintenance-free single-parameter sensor (SPS) for measuring nitrate (NO3-, NO3-N) Slim design (Ø 48.3 mm) for observation wells with minimum 3“diameter High measuring accuracy, drift-free Available in different measuring ranges ...
... arrangement of one one-dimensional 1/2" sound intensity probe and one one-dimensional 1/4" sound intensity probe is formed. Due to its two-channel technology each individual Sound Intensity Probe makes ...
Microtech Gefell GmbH
... The sound intensity probe SIS 194 3D 1/4" allows a simultaneous sound intensity measurement at one point of a room in all three dimensions. For this purpose an arrangement of three one-dimensional sound intensity probes ...
Microtech Gefell GmbH
... The sound intensity probe SIS 194 3D 1/2" allows a simultaneous sound intensity measurement at one point of a room in all three dimensions. For this purpose an arrangement of three one-dimensional sound intensity probes ...
Microtech Gefell GmbH
... solution for creating depth profiles of soil moisture and temperature. Designed for use in combination with TRIME PICO and SONO
probes; provides RS485 output for integration with data loggers and control systems.
Application
Mobile ...
... high-performance AC/DC current probe belonging to the Micsig CP2100 series AC DC current probe family. This CP2100B current probe features an impressive bandwidth of DC~2.5MHz, making it a powerful 2.5MHz ...
... high-performance high frequency AC DC current probe designed for precise current signal analysis across a wide range of applications. As part of the Micsig precision current probe lineup, this 50MHz current probe ...
... is compatible with other models like DP700 differential probe, DP1500 high-voltage probe, DP3000 differential probe, and DP7000 100MHz probe, each tailored for specific applications. ...
The measurement principle of the SOMQUALITY-NTU turbidity sensor is based on infrared light scatter at an angle of 90°. Thanks to the measurementat a wavelength of 880 nm and the wide detection range of 0 to 4'000 NTU, the sensor can be used in varous ...
... Laser sensor is designed for non-contact measurement of geometric parameters of holes (diameter, ovality, roundness). • Diameter of the laser sensor body, mm: 8.5; 15 • Range of controlled diameters, mm: 9.2...19; 16...48 • Laser sensor linearity, ...
... 3 Channel, 1000:1 High Precision Voltage Attenuators - Input: 3x 4mm Safety plug, touch protected along IEC/EN 61010-1, - 1x 4 mm plug protective GND - Attenuation: 1000 : 1 - Zin: 20 MOhm, 12 pF - Vmax: 1000V Cat. III - 5kV test voltage - Accuracy ...
... housing of the 3D measuring probe is made of stainless steel and shows a lasered logo of the manufacturer. A plastic ring is embedded in the housing of the 3D-finder, which is equipped with RGB light. When you put the probe ...
... Inside Diameter Air Probe Mainly used for through hole measurements, the PA is a non-contact style sensor which shoots air through its orifices against a work object. The nozzle is at 8 to 20 mm from the tip of the probe. ...
SEALS USA
... Inside Diameter Air Probe Mainly used for through hole measurements, the PB is a non-contact style sensor which shoots air through its orifices against a work object. The nozzle is at 3 to 4 mm from the tip of the probe. ...
SEALS USA
... Inside Diameter Air Probe Mainly used for through hole measurements, the PC is a non-contact style sensor which shoots air through its orifices against a work object. The nozzle is at 2 mm from the tip of the probe. It ...
SEALS USA
... DESIN Instruments manufactures Thermocouples and RTDs since 1950. Until today we have manufactured more than 450.000 units of different types. We export to 21 countries-suppling products with very high standard of quality, to comply with their specifications. We ...
Desin Instruments
... With this reference temperature sensors you can increase significant the measurement accuracy of the above mentioned LR-Cal temperature calibrators (-2I versions). The measuring range is 0°C...+1400°C. This makes this external sensor ...
... rotating parts inside the rotary field probe. SCHLEICH delivers rotary field probes for rotating and linear drives. No matter if internal or external rotor – we have the corresponding solution. We also offer special ...
... The ADCATrol SPS33 conductivity probe is typically used in steam applications to measure the conductivity of superheated boiler water, condensate or feedwater. The probe is used in conjunction with an ADCATrol BCS controller ...
... The future of pH measurement is here with the robust ISFET technology. The Sentron sensor transcends conventional limitations, bringing together ISFET pH sensing, 4-electrode conductivity measurement, and ORP analysis in a single device. Aimed at practiced ...
... Near-field probes are without a doubt the most effective tool for debugging EMC issues. Near-field probes are used to locate the source of RF emissions as well as circuitry susceptible to RF. Near-field probes ...
TEKBOX
... Accuracy ±1.0%RH; 0.6℃ Range 0…100%RH, -40℃…+180℃ The BL798 is a rugged, accurate temperature and relative humidity probe. It measures relative humidity over the range of 0 to 100% RH and temperature over the range of -40°C to ...
... Probe photoelectric probe or for probe integration. Up to five photoelectric probes can be connected. For OM5 control unit. 10m cable. PRODUCT FEATURES Decription - Spare photoelectric ...
... meat, cheese or similar. The knife probe can also be used in a variety of applications in the food processing and agricultural sector. Probe dimensions are Ø15 x 150mm. One of a range of pH electrodes and probes ...
... Shipping Weight: 1 lbs. Stock: In stock The Passive Probe - Probe only is an affordable probe for locating and digitizing, suitable for hobbyist/occasional use Our passive probe ...
the best suppliers