- Hydraulics - Pneumatics >
- Pump >
- Under load pump
Under load pumps
Flow: 1, 1.5 l/min
Pressure: 100 bar
The MIXTRON high-pressure pumps represent a true revolution in the field. Our exclusive and patented technology combines the highest quality components to offer a complete solution in terms of efficiency, durability, and versatility. If ...
MIXTRON S.R.L.
Flow: 2, 2.2 l/min
Pressure: 100 bar
The MIXTRON high-pressure pumps represent a true revolution in the field. Our exclusive and patented technology combines the highest quality components to offer a complete solution in terms of efficiency, durability, and versatility. If ...
MIXTRON S.R.L.
Flow: 4, 5 l/min
The MIXTRON high-pressure pumps represent a true revolution in the field. Our exclusive and patented technology combines the highest quality components to offer a complete solution in terms of efficiency, durability, and versatility. If ...
MIXTRON S.R.L.
Flow: 6, 1, 15 l/min
Length: 180, 165 mm
Width: 230, 160 mm
Electric gear pump for an intermittent use, for the transfer of low viscosity oil, antifreeze (A), diesel (D), water (W). Protection category IP55. Pump body in brass, gears in bronze and pump shaft in stainless steel. Electric cable ...
Flexbimec
Flow: 15, 6 l/min
Length: 165, 185 mm
Width: 160, 240 mm
Electric gear pump for an intermittent use, for the transfer of low viscosity oil, antifreeze (A), diesel (D), water (W). Pump body in brass, gears in bronze and pump shaft in stainless steel. With metal cover, ON-/OFF switch and 1 m ...
Flexbimec
Flow: 25, 23, 13.5, 9, 12 l/min
Length: 100, 120, 300 mm
Width: 120, 220, 100 mm
Manual lever action and rotary drum pumps, made of carbon steel with components in aluminium. Main fields of application: transfers and dispenses of small quantities of oil or diesel from drums. Suitable especially for use with gear ...
Flexbimec
Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW
Model CESE 5 The OMG filter pumps produced in the series CESE are designed to be introduced in the surface treatment process called “electroplating”. According to such technique, metallic objects to be plated for decoration or protection ...
Flow: 60,000 l/h
Pressure: 2.5, 2 bar
Model TE 30 The OMG filter pumps produced in the series TE are designed to be introduced in the surface treatment process called “electroplating”. According to such technique, metallic objects to be plated for decoration or protection ...
Flow: 0.5 m³/h - 3.5 m³/h
Pressure: 0 bar - 10 bar
Head: 9 m - 54 m
Horizontal low pressure multistage pumps can be used in numerous installations where the pump features and materials require specific conditions, such as: Air-conditioning Cooling Water treatment Fertilisation Environment applications PUMPED ...
Flow: 100, 120 l/min
Pressure: 8 bar
Power: 0.35 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their unique crankcase, ...
NARDI COMPRESSORI
Flow: 115, 145 l/min
Pressure: 15 bar
Power: 1.1 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their unique crankcase, ...
NARDI COMPRESSORI
Flow: 36, 43, 29, 35 m³/h
Pressure: 10 bar
Power: 1.9, 2.2 kW
The OIL-LESS pump units range completely manufactured in Italy by NARDI COMPRESSORI stand out for their high quality, the prime materials and components installed ensure their long life and top performance. With their unique crankcase, ...
NARDI COMPRESSORI
Flow: 3,200 m³/h
Pressure: 90 bar
Head: 480 m
The SCE is a heavy-duty, single stage, overhung process pump, designed and built in accordance with the latest edition of API 610 (OH2 type), and with over 130 hydraulic combinations available. Overview Designed for all fluids and process ...
RUHRPUMPEN
Flow: 366.5 m³/h
Pressure: 1,100 bar
Fluid temperature: -40 °C - 200 °C
The RDP range is a series of Reciprocating Plunger Pumps in a variety of sizes in Triplex and Quintuplex formats and designed in accordance with the latest edition of API 674 and ISO 13710 for high pressure applications. Applications ...
RUHRPUMPEN
Flow: 2,886 m³/h
Pressure: 26 bar
Head: 235 m
Designed to exceed the ANSI / ASME B73.1 specification, the CPP is a horizontal, single stage, end suction, centrifugal pump that works around a basic hydraulic and mechanical concept to guarantee its efficiency across a broad range of ...
RUHRPUMPEN
Flow: 0.7 m³/h - 9,370 m³/h
Pressure: 20 bar - 450 bar
Fluid temperature: -40 °C - 120 °C
A trustworthy solution for applications requiring the highest levels of operational accuracy and reliability. The features include: Hydraulic oil-operated diaphragms Double oil for hydraulics and mechanism lubrication ensuring 100% ...
Seko S.p.a.
Flow: 11.3 l/h - 2,400 l/h
Pressure: 200, 95, 90 bar
Fluid temperature: -20 °C - 150 °C
Exakta’s broad experience in supporting customers throughout the most challenging projects has led to the development of Nexa XP, a special version of Nexa able to cope with extreme suction conditions and a wide range of chemicals. Nexa ...
Seko S.p.a.
Flow: 3.4 l/h - 660 l/h
Pressure: 124 bar
Power: 1.1, 1.5, 0.18, 0.25, 0.75 kW
Delivering a high level of precision and repeatability in the metering of chemicals across a broad range of industrial processes, Nyva is the professional’s choice for applications requiring reliability in even the most challenging environments. Mechanisms Positive ...
Seko S.p.a.
Flow: 4.4 l/min - 66 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors due to their design and configuration. ...
Anglada Pumps
Flow: 6.6 l/min - 100 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors due to their design and configuration. ...
Anglada Pumps
Flow: 8.8 l/min - 130 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors due to their design and configuration. ...
Anglada Pumps
Flow: 2,000 m³/h - 50,000 m³/h
Head: 3 m - 175 m
PRODUCT FEATURES Flows from 10,000 to 220,000 gpm (2,000 to 50,000 m3/h) Heads from 10 to 600' (3 to 175 m) 24 to 66 inch Discharge (610 to 1676 mm) 245 to 880 RPM PROVEN PERFORMANCE WITH OVER 130 YEARS OF EXPERIENCE: HIGH EFFIENCIES, ...
FLYGT
Flow: 0 us gal/min - 63 us gal/min
Length: 442, 397 mm
Width: 311, 352 mm
Effortless to maintain. Flexible by design. Built robustly for reliable performance. Versamatic’s Valor AODD pump, patent pending. This new 1” pump with an innovative center section makes conquering pumping challenges easier than ever. ...
Flow: 0 us gal/min - 123 us gal/min
Length: 471 mm
Width: 310.29 mm
Versamatic’s 1 ½" (38mm) air-operated double-diaphragm (AODD) pump uses a patented air valve system to deliver consistent on/off reliability while maintaining superior air efficiency. Available with several extended-life diaphragm ...
Pressure: 63 bar
Power: 0.18, 0.12 kW
Fluid temperature: -10 °C - 60 °C
The pump is designed for the lubrication with plastic grease or oil of machines and equipment requiring continuous lubrication in small quantities. The lubricant is fed to each receiving point via a separate line, directly from the ...
Zaklady Automatyki POLNA S.A.
Flow: 0.15, 0.25 l/min
Pressure: 400, 200 bar
Power: 0.75 kW
The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication points located ...
Zaklady Automatyki POLNA S.A.
Flow: 0.4, 0.2, 0.1 l/min
Pressure: 200, 320, 400 bar
Power: 1.1 kW
The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number of lubrication points located ...
Zaklady Automatyki POLNA S.A.
Flow: 10 m³/h - 1,400 m³/h
Weight: 142 kg - 1,956 kg
The Linatex pump, type III R, belongs to the latest generation of successful wear-resistant and corrosion resistant slurry pumps and has an improved efficiency. It has in practice proven durable Linatex rubber lining and a rubber impeller ...
Pressure: 51.7, 34.3 MPa
Power: 596, 373, 969, 745, 1,193 kW
Length: 3,639 mm - 5,475 mm
Mud pump is used to circulate drilling fluid while drilling, it is the core part of drilling fluid circulation system, and it is composed of power end and fluid end. The products conform to API Spec 7k standards, and have obtained ...
Output diameter: 60.3 mm - 88.9 mm
The Sucker rod Pump is an important equipment of rod pump production system. The oil well pump pumps off oil well fluid by the power, which is transmitted by the pumping unit and sucker rod. The products conform to API Spec 11AX &GB/T18607 ...
Flow: 20 l/min
Pressure: 20 bar
Fluid temperature: 60 °C
Three-diaphragm pump with reinforced Polypropylene circuit, Kynar/AISI 316 valves (LFP version), AISI 316 diaphragm mounting components, Viton seals. Version: SP (cylindrical with shaft key), CR (reduction gearbox for internal combustion ...
Annovi Reverberi
Flow: 220 m³/h
Pressure: 16 bar
Head: 140 m
PROLAC HCP is a range of close-coupled centrifugal pumps with hygienic design, compact and highly efficient. It is made of a cold-formed stainless steel casing, impeller, mechanical seal, pump cover, lantern and shaft, connected to the ...
Flow: 180 m³/h
Pressure: 10 bar
Head: 72'00"
The RV centrifugal pump with helicoidal impeller is the best solution for the transfer of liquids with solid particles or medium viscosity products that cannot be pumped with an ordinary centrifugal pump. Due to the helicoidal shape of ...
Flow: 1,000 m³/h
Pressure: 10 bar
Head: 295'00"
The DIN-FOOD pump is a hygienic high capacity centrifugal pump (up to 1000 m³/h) designed to cater for an unfulfilled need in the food-processing and chemical and pharmaceutical industries. The applications of the high-flow centrifugal ...
Flow: 18, 33, 42 l/min
Pressure: 6 bar
Head: 5, 6, 8 m
The drive JP-AIR 1 is a compactly built, elegant designed air operated motor with an aluminium housing. The lightweight, handy and powerful device can be used as drive for the laboratory and drum pump tubes and is suitable in this ...
Dr. Jessberger GmbH
Flow: 0.6 l/h - 1,200 l/h
Pressure: 6, 12, 18, 24 bar
Power: 0.37 kW - 1.1 kW
for thin fluid to high viscous media Type JP-7032 up to JP-7120.2. Almost pulsation free transport and small quantity dosing of thin to high viscous, thixotropic, gaseous, solids and fibres containing, aggressive and neutral media ...
Dr. Jessberger GmbH
Flow: 0 l/min - 100 l/min
Pressure: 7 bar
Head: 70 m
The curves and performances refer to pumps with submerged suction line and resistance-free discharge side outlet with water at 20 ° C and vary depending on the material.
Dr. Jessberger GmbH
Power: 17.6 kW
Length: 1,130 mm
Width: 740 mm
Endress PTO shaft generators produce a cost-effective power supply. These are simply mounted on existing agricultural tractors - with no investment in an additional drive motor needed. Naturally, ENDRESS PTO generators meet the requirements ...
Flow: max 1200.0 us gal/min
Pressure: max 8.0 bar
Head: 310'00"
QC Series Centrifugal pumps are built and designed in compliance with 3A Standards, with the following characteristics: Open Impeller Volute casing with central suction Fittings: Clamp (standard), Flange, NPT thread, Weld, Bevel Seat ...
Q-Pumps
Flow: 1.2 l/h - 35 l/h
Pressure: 0 bar - 10 bar
Power: 33, 20 W
sera Solenoid Diaphragm Pumps are designed for the exact dosing of liquid media in all industrial fields. The dosing control is performed process-bound for the most part. Capability characteristics Directly controllable ...
Flow: 1 m³/h - 66 m³/h
Head: 3.5 m - 114 m
Power: 0.37 kW - 9.2 kW
Construction Close-coupled, centrifugal pumps; electric motor with extended shaft directly connected to the pump. NM: single-impeller. NMD: with two back-to-back impellers (with axial thrust balancing). Connections : threaded ports ISO ...
Calpeda
Flow: 1 m³/h - 480 m³/h
Head: 3 m - 95 m
Power: 0.25 kW - 75 kW
Construction Close-coupled centrifugal pumps; electric motor with extended shaft directly connected to the pump up to 30 kW, new bracket construction for standard motors (stub-shaft construction) from 37 to 75 kW with integrated thrust ...
Calpeda
Flow: 1 m³/h - 480 m³/h
Head: 3 m - 95 m
Power: 0.25 kW - 75 kW
Construction Close-coupled centrifugal pumps; electric motor with extended shaft directly connected to the pump up to 15 kW, new bracket construction for standard motors (Stub-shaft construction) from 18,5 to 75 kW with integrated thrust ...
Calpeda
Flow: 0 us gal/min - 3,000 us gal/min
Head: 0'00" ft - 500'00"
End Suction Pumps End suction, vertically split, single-stage pump for nuclear auxiliary and radwaste systems. Offers a rugged, reliable design, specifically for nuclear applications. Design Features of Hayward Tyler End Suction Pump ...
Hayward Tyler®
Flow: 0 us gal/min - 160,000 us gal/min
Head: 0 m - 500 m
Double Suction Pumps Single-stage, horizontally or radially split pumps using a double suction impeller. Features a rugged design that is particularly suited for hazardous, safe-guarding conditions. Design Features of Hayward Tyler ...
Hayward Tyler®
Flow: 0 us gal/min - 240 us gal/min
Pressure: 0 psi - 500 psi
Power: 0 kW - 15 kW
Varley Gear Pumps Double helical gear pumps with smooth, non-pulsating flow, providing high reliability and low maintenance resulting in a lower lifetime cost of ownership. Varley Gear Pumps are offered through our sister company Hayward ...
Hayward Tyler®
Flow: 15 m³/h - 18 m³/h
The tried-and-tested liquid screed pump Estrich Boy FHS 200/3 was designed to satisfy the highest customer and construction site requirements. The Estrich Boy FHS is intended for the delivery of liquid screed and can be fed easily and ...
Flow: 4 m³/h
Pressure: 160 bar
SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding to highest ...
SID Société Industrielle de la Doux SA
Flow: 8 m³/h
Pressure: 160 bar
SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding to highest ...
SID Société Industrielle de la Doux SA
Flow: 15 m³/h
Pressure: 160 bar
SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding to highest ...
SID Société Industrielle de la Doux SA
Flow: 9,000 l/h
Head: 53 m
Power: 2 ch
HANIL Electric Co.,Ltd
Flow: 2,700 l/h
Head: 26 m
Power: 0.8 ch
HANIL Electric Co.,Ltd
Flow: 160 l/h
Head: 30 m
Power: 2 ch
HANIL Electric Co.,Ltd
• Flow rates and prevalence on request • Made of PP or PVDF
CAODURO impianti S.r.l.
• Flow rates and prevalence on request • Made of PP or PVDF • Filter chambers with discs, cartridges, wires, bags
CAODURO impianti S.r.l.
• For applications inside or outside the tank • Made of plastic: PP – PVC • Shaft made of: AISI316 – coated titanium
CAODURO impianti S.r.l.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining