Under load pumps

Flow: 6.5 l/min
Pressure: 420 MPa
Power: 60 ch

DOUBLE INTENSIFIERS STRUCTURE CAN DRIVE 4 ROBOT ARMSAT THE SAME TIME. Motor Rating：45kW/60HP Pressure Range (Deadhead) ：60,000psi Flow Rate at Max. Pressure：1.5gal/min Attenuator Volume：2L Length：66.93in Width：43.31in Height：55.12in

Flow: 2.9 l/min
Pressure: 100,000 psi
Power: 45 kW

Cutting speed increased 50% Cost savings 28% Cutting metal thickness 300mm Motor Rating:45kw/60HP Pressure Range (Deadhead):90,000psi(6200 bar) Flow Rate at Max. Pressure:0.78 gal/min Attenuator Volume:2L Length:83.7in Width:53.7in Height:59.3in

Flow: 3.8 l/min
Pressure: 420 MPa
Fluid temperature: 5 °C - 40 °C

Adopt servo motor Save on costs 30% Dual intensifier, continuous operation for 24 hours Motor Rating：37kW/50HP Pressure Range (Deadhead) ：60,000psi Max. Flow Rate at Max. Pressure (60 Hz)：1.00gal/min Attenuator Volume：2L Length：67.7in Width：45.6in Height：59.3in

Flow: 4, 3.4, 4.5, 3, 2.6 m³/h
Pressure: 7 bar

The C 30 series Neptune pneumatic water pump is an enhanced hose setup that generates 7 bar pressure rating. This system is mounted to a 5-meter hose which delivers the media into the pump. The compressed air connection hose approximates ...

Flow: 100, 120 m³/h
Pressure: 10 mbar
Power: 2.2, 3 kW

Cast iron pumping unit coupled to the electric motor via an elastic coupler. Equipped with a support base, air intake check valve and cooling fan. Accessories: Air filter, gas ballast valve Special voltages: on demand

Flow: 28, 33 m³/h
Pressure: 10 mbar
Weight: 21 kg

Cast iron pumping unit with a special flange/shaft pulley assembly. Aluminium oil/air separator eliminates oil mist discharge, air intake check valve, air cooling. First oil filling included. Accessories: Air filter, gas ballast valve, ...

Pressure: -950 mbar - 140,000 mbar

Pneumatic pressure test pump LMP 140 is a hand pump operated and designed to generate pressure range -950 mbar ... 100 /140 bar. 0,1 mbar pressure resolution. Build-in filters to protect from dirt and moisture to reduce the need for ...

Flow: 35, 40, 50 l/min
Head: 55, 46, 38 m
Power: 0.6, 0.52, 0.37 kW

Volumetric water pumps able to offer high pressions in relation to comparatively low powers and which have particularly steady operating curves. They are qualified in domestic fittings, to increase the system pressure in aqueducts and ...

Flow: 35 l/min
Head: 38 m
Power: 0.37 kW

Volumetric water pumps able to offer high pressions in relation to comparatively low powers and which have particularly steady operating curves. They are qualified in domestic fittings, to increase the system pressure in aqueducts and ...

Flow: 40, 60 l/min
Head: 38, 58 m
Power: 0.37, 0.6 kW

Volumetric water pumps able to offer high pressions in relation to comparatively low powers and which have particularly steady operating curves. They are qualified in domestic fittings, to increase the system pressure in aqueducts and ...

Flow: 5,000 l/h
Pressure: 1.8 bar
Power: 0.7 kW

Model CESE 5 The OMG filter pumps produced in the series CESE are designed to be introduced in the surface treatment process called “electroplating”. According to such technique, metallic objects to be plated for decoration or protection ...

Flow: 60,000 l/h
Pressure: 2.5, 2 bar

Model TE 30 The OMG filter pumps produced in the series TE are designed to be introduced in the surface treatment process called “electroplating”. According to such technique, metallic objects to be plated for decoration or protection ...

ALLOWS THE DESIRED QUANTITY OF SERUM WITH ABSOLUTE PRECISION AND GRADUALITY TO BE DISTRIBUTED INSIDE THE DOUBLE FILLERS. An optimal system, which docs not altor tho charactoristics of tho sorum graft. Equipped with remote control, ...

Flow: 0.01 m³/h - 550 m³/h
Power: 24, 10 kW
Weight: 520, 252, 275 g

KPK400 series peristaltic pumps can be equipped with DC brushed, DC brushless and stepper motors to meet the needs of different application scenarios. The pump tube uses imported BPT(B) with a wall thickness of 1.6mm, which is suitable ...

Flow: 0.027 l/min - 0.04 l/min

1.Small and powerful 2.LCD display,Key operation,Friendly man-machine interface 3.Support adjust speed,can adjust to the required speed by adjust knob. 4.Real time clock, support regularly start and stop 5.Interval Run time ...

Flow: 16 l/min - 315 l/min

Flow: 0.002 l/min - 1 l/min
Power: 20 kW
Length: 190 mm

SP 311 Peristaltic Pumps Peristaltic pumps ideal for transferring gas, liquids, mixtures and emulsions in various industries. Easy to use and Reliable • Minimum maintenance (just replace the tube) • Easy cleaning – no contact ...

Flow: 45 l/min
Pressure: 2 bar - 6 bar
Input diameter: 1.5 in

Ratio 8:1 - 45 lpm application: pressure supply / transfer with recirculation PUMP PERFORMANCE Ratio: - 8:1 b Max cycles / minute: - 60 Displacement per cycle: - 757 civil code Air consumption @ 6 bar: - 2700 Nlpm PUMP SPECIFICATIONS Lower ...

Flow: 27 l/min
Pressure: 2 bar - 6 bar
Input diameter: 1.5 in

Ratio 4:1 - 27 lpm application: low/medium viscosity products use: pressure supply / transfer PUMP PERFORMANCE Ratio: - 4:1 b Max cycles / minute: - 60 Displacement per cycle: - 456 of the civil code Air consumption @ 6 bar: ...

Flow: 45 l/min
Pressure: 2 bar - 6 bar
Input diameter: 1.5 in

Ratio 3:1 - 45 lpm application: low/medium viscosity products use: supply / transfer / recirculation PUMP PERFORMANCE Ratio: - 3:1 b Max cycles / minute: - 60 Displacement per cycle: - 757 civil code Air consumption @ 6 bar: ...

Flow: 60, 80 l/min
Pressure: 14,700 Pa
Power: 39, 58 W

Pressure type Easy restart by micro swith Two directional control valve No need of grounding Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Air injection for bubble bath • Small capacity compressor

Flow: 80, 40, 60 l/min
Pressure: 12,800, 14,700 Pa
Power: 39, 58, 30 W

Pressure type Dust control “Dust trap filter” Easy restart by micro swith (XP-60 / 80 only) No need of grounding Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Air injection for bubble bath • Small capacity compressor

Flow: 18, 20 l/min
Pressure: 9,800 Pa
Power: 17 W

Pressure type Outdoor (Rainproof) use • Septic tank (biological contact aeration) • Bubble bath (air bubble injection) • Oxygen supply for fish breeding

Flow: 2,800 m³/h
Fluid temperature: 180 °C

CUP-BB5V - Multi-stage, API, barrel radially split pump Product Category: BETWEEN BEARINGS CUP-BB5V is available in two heavy duty designs: multi-stage diffuser or double case volute..... The ClydeUnion Pumps CUP-BB5V is available ...

Flow: 12,000 m³/h
Fluid temperature: 80 °C

CUP-CVP - concrete volute pump Product Category: SPECIALIZED PUMPS Concrete volute pumps are designed for high flow applications, resulting in fewer pumps...... Concrete volute pumps are designed for high flow applications, resulting ...

Flow: 2,800 m³/h
Fluid temperature: 180 °C

CUP-BB5HP - Multi-stage, API, barrel radially split pump Product Category: BETWEEN BEARINGS CUP-BB5HP encompasses heavy duty, radially split diffuser type multi-stage pumps..... The ClydeUnion Pumps CUP-BB5HP encompasses heavy ...

Flow: 40, 74, 38 l/min
Length: 250 mm
Width: 140 mm

High performance standards 100% Oil-free Ultra-High flow rate for quicker operation Excellent gas sealing / Contamination free Long reliable service life Low power consumption and noise level

Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm

The PCP 005 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated volume with the highest accuracy, ...

Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm

The PCP 015 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated volume with the highest accuracy, ...

Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm

The PCP 050 volumetric pumps is the state of art in the micro-dispensing world. The pumps are drived by a gearmotor with encoder and allow volumetric dispensing in strips, drops, or fill a determinated volume with the highest accuracy, ...

Flow: 0.26 l/min - 8.5 l/min
Pressure: 50 bar - 700 bar
Length: 526 mm

The UPMD725 RC pump is a double-acting air-hydraulic pump with double pneumatic motor, pneumatic RC drive and 4/3 lever distributor hand valve Equipped with a pressure gauge, the oil tank capacity is 25L and oil flow 0.26 (l/min) at ...

Flow: 9 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

ASTRAevo range is the ideal solution for most industrial applications. The pumps are conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, and reducing at the lowest ...

Flow: 450 l/min
Pressure: 8 bar
Head: 70 m

The original air-operated double diaphragm QUANTUM pumps are special for their optimized performance and unique advantages that traditional AODD pumps do not have. Solid-block construction made of pure thermoplastic polymers (PTFE) Available ...

Flow: 1,100, 1,280 l/min
Pressure: 8 bar
Head: 4.5, 6 m

The entire construction of the pump (body and air distributor) is made of AISI 316l making the MISTRAL series extremely resistant to corrosion, guaranteeing at the same time a robust and solid solution for continuous operations. High ...

Flow: 3,200 m³/h
Pressure: 90 bar
Head: 480 m

The SCE is a heavy-duty, single stage, overhung process pump, designed and built in accordance with the latest edition of API 610 (OH2 type), and with over 130 hydraulic combinations available. Overview Designed for all fluids and process ...

Flow: 366.5 m³/h
Pressure: 1,100 bar
Fluid temperature: -40 °C - 200 °C

The RDP range is a series of Reciprocating Plunger Pumps in a variety of sizes in Triplex and Quintuplex formats and designed in accordance with the latest edition of API 674 and ISO 13710 for high pressure applications. Applications ...

Flow: 550 m³/h
Pressure: 40 bar
Head: 280 m

The SPN is a vertical in-line, single stage, single suction centrifugal pumps accordance to API 610 latest edition (OH5 type) and mechanical seal chamber in accordance with API 682 Overview The SPN vertical in-line pump was engineered ...

Flow: 1.3 l/min
Pressure: 7, 238 bar
Weight: 16 kg

Larius is expert in high pressure industrial spray technology equipment for demanding protective coating airless application. The Vega 34:1 is an high pressure pneumatic spray package, robust and resistant, for industrial painting ...

Flow: 3.8 l/min
Pressure: 210, 7 bar
Weight: 25 kg

Larius is expert in high pressure industrial spray technology equipment for demanding protective coating airless application. The Ghibli 30:1 is an high pressure pneumatic spray package, robust and resistant, for industrial painting ...

Flow: 3 l/min
Pressure: 6.5, 260 bar
Weight: 25 kg

Larius is expert in high pressure industrial spray technology equipment for demanding protective coating airless application. The Ghibli 40:1 is an high pressure pneumatic spray package, robust and resistant, for industrial painting ...

The mini solvent pump is provided with an enhanced quality hand pump, applicable for small containers like bottles, canisters and tanks with a maximum capacity of 5 liters. The pump provides reliable filling and dosing of solvents and ...

Flow: 2 l/min
Weight: 490 g

Description The Casella APEX2 sampling pump allows to sample different types of pollutants: dust, VOC, hydrocarbons. It is used in ambient air. This personal sampling pump is optimized to approximately 2 l/min, the flow rate at which ...

Weight: 1.4 kg

CleanAir dual head peristaltic pump, 3 roller design, 120 Vac. (Ref 9771-BA) Model number 9771-BA is used in Clean Air's SGC-4000 and MAK 6-2 Pump Model Number: Clean Air Dual Head Peristaltic Pump, 3 Roller Design, 120 Vac Motor ...

Flow: 0.7, 1.1, 14, 1.6, 2.41 l/min
Pressure: 1,750, 2,800, 805, 1,260, 140 bar

High Pressure hydropneumatic pumps have to make effort tests on components for high pressure. For having a pumping system able to make more than 100.000 pumping cycles in few weeks, for these pumps it has been studied a component system ...

Flow: 0.0012 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 8.9 W

Compact hermetic pump for continuous dosage The micro annular gear pump mzr-2961 is suitable for handling crystallizing, oxygen or moisture sensitive liquids, because the pump has no shaft seal. This functionality is made possible thanks ...

Flow: 0 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W

Compact hermetic pump for diskrete dosage The micro annular gear pump mzr-2965 is suitable for handling crystallizing, oxygen or moisture sensitive liquids, because the pump has no shaft seal. This functionality is made possible thanks ...

Flow: 0.0048 l/min - 0.072 l/min
Pressure: 0 bar - 5 bar
Power: 8.9 W

Compact hermetic pump for continuous dosage The micro annular gear pump mzr-4661 is suitable for handling crystallizing, oxygen or moisture sensitive liquids, because the pump has no shaft seal. This functionality is made possible thanks ...