Valves

Do you need help making a decision?  Take a look at our buying guide
833 companies | 6,777 products
exhibit your products

& reach your clients in one place, all year round

Exhibit with us
Search
Valves | Choosing the right valve
Valves are mechanical devices that control the flow and pressure of a fluid in a hydraulic or air system. They are essential components of pipe systems that transport liquids, gases, vapors, sludge, etc. There are many different types of valves are available, each one has different characteristics, capacity and uses. There are different operation methods available: manual, pneumatic, electric, etc.
disc bottom valve
disc bottom valve
CLEANVALVE

DN: 50 mm - 150 mm
Pressure: 0 bar - 25 bar
Temperature: 0 °C - 230 °C

... Self-draining, easy-to-clean bottom outlet valve CleanValve from De Dietrich is a high-performance bottom outlet valve designed for glass-lined, stainless steel, and nickel alloy reactors and tanks. Its self-draining ...

drain valve
drain valve
ECR-3

Temperature: -50 °C - 105 °C

... TECHNOR® drainage valve for installation on enclosures with increased safety intended for use in explosive atmospheres zones 1 & 2 (gas), 21 & 22 (dust). This valve allows condensation to be drained from inside the enclosure. ...

ball valve
ball valve
Furon®

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 3 bar
Temperature: 0 °C - 60 °C

... in fluoropolymer valves have allowed us to provide you with an entrapment free, full flow-through component. These high-purity valves are available in numerous configuration alternatives in both 2 way and 3 way valves ...

See the other products
Saint-Gobain Performance Plastics - Process System
butterfly valve
butterfly valve
M series

DN: 0.78 mm - 1.32 mm
Pressure: 0 bar - 7 bar

... M Series Solenoid Valve is a sub-miniature 2- or 3-way valve that implements efficient power conservation. In battery-powered applications, the M Series can be designed for extreme low wattage conditions. It features ...

ball valve
ball valve
KHP

DN: 32 mm - 225 mm
Pressure: 10 bar

... the FRIALEN-Ball Valve KHP must be lined up to suit the type of actuation intended, in order to ensure that the installation kit KBS will placed correctly. Good reasons for using the FRIALEN-Ball Valve KHP: The ...

See the other products
Aliaxis
ball valve
ball valve
WaterStop Jeweller

DN: 25, 15, 20 mm

... shutoff valve Not a drop of problems WaterStop automatically shuts off the water in 5 seconds at a facility with an Ajax security system if LeaksProtect or a third-party water leak detector is triggered. The device combines a high-quality ...

pneumatic valve
pneumatic valve
1701 series

Pressure: 14 bar
Temperature: 49 °C
Flow rate: 5 ft³/min - 35 ft³/min

... With the Hankison By-Pass Valve you can service your system components and still use the system. The By-Pass Valve eliminates the expensive installation costs and space limitations of conventional three valve ...

powder valve
powder valve

Pressure: 6, 10 bar

... provides you with an extremely compact and safe conveying device from a single source. On request, the Volkmann rotary valve is also available in a pressure shock-resistant version up to 10 bar and a pressure-resistant version up ...

regulating valve
regulating valve
THERMAG VALVE CS611

DN: 15 mm - 50 mm
Pressure: 16 bar - 16 bar
Temperature: -10 °C - 100 °C

... Materials and construction

  • Valve body: DZR corrosion-resistant brass (EN12165-CW617N-DW)
  • Flow sensor: PEEK body with HC276 electrodes
  • Valve unit: modulating 2-way ball valve,
...

globe valve
globe valve
VM series

DN: 15 mm - 400 mm

... Control valves with electrical actuator -Flow control, mixing and distribution of liquids, steam and gases; two and three way -With recirculation for boiler feed water control with pump protection system by maintaining the ...

See the other products
ASCON TECNOLOGIC
globe valve
globe valve
VP series

DN: 15 mm - 400 mm
Pressure: 0.8 bar - 2.8 bar

... Control valves with pneumatic actuator -Flow control, mixing and distribution of liquids, steam and gases; two and three way -Steam desuperheating for pressure reduction and simultaneous cooling with water injection -Special ...

See the other products
ASCON TECNOLOGIC
globe valve
globe valve
ET7

DN: 15 mm - 20 mm

... Threaded valves with 500 N actuator -Heating, ventilation and air conditioning -Optional mechanical manual override -Self-calibrating proportional model ...

See the other products
ASCON TECNOLOGIC
piston valve
piston valve

Flow rate: 5 l/min - 2,400 l/min

... developed a range of 3 stage valves. The characteristics of these valves have been optimized to provide the best possible performance in test applications when combined with the Hydropuls actuators. Special versions of ...

servo-driven valve
servo-driven valve
SPV-1

Highly accurate and linear pressure regulating device

pneumatically-operated valve
pneumatically-operated valve

Pressure: 100, 500, 1,000 bar

... High-pressure valve In addition to the technical challenges in pressure generation, applications in high-pressure technology often require special high-pressure valves with the desired properties which are only very ...

diaphragm valve
diaphragm valve
BRD series

DN: 0.75 in - 1.5 in
Pressure: 0.3 bar - 8.6 bar
Temperature: -20 °C - 85 °C

... purposes. Description BRC/BDV Series Diaphragm Valve BRC and BDV series are dust collector valves used specifically in dust collector and baghouse systems. The two chambers of the dust collector valves ...

pressure-reducing valve
pressure-reducing valve

Pressure: 100, 63 bar

... The ideal and reliable high-flow CO2 pressure reducing valve for use with CO2 gas or liquide. ...

globe valve
globe valve

DN: 1.5 in - 8 in
Pressure: 0 psi - 5 psi
Flow rate: 0 us gal/min - 2,000 us gal/min

... HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize leakage. ...

ball valve
ball valve

... 3-Way and 6-Way Ball Valves Like HILCO Transfer Valves, HILCO Ball valves provide uninterrupted flow during transfer of fluid. Unlike Transfer Valves, which are limited to liquid service, ...

ball valve
ball valve
389019

DN: 6.35 mm
Pressure: 10 bar

... SOLENOID VALVE FOR COMPRESSED AIR, PUMP CONTROL. NO, Solenoid valve for compressed air. Brass and NBR. 24 V DC. Normally open type N.O. 1 ...

See the other products
SAMOA Industrial, S.A.
needle valve
needle valve
950321

DN: 6.35 mm

... AIR LINE SHUTOFF VALVE, NEEDLE AIR VALVE, BSP (FF) Air valve, BSP (FF). Needle air valve. ...

See the other products
SAMOA Industrial, S.A.
ball valve
ball valve
389016

DN: 9.525 mm
Pressure: 10 bar

... Solenoid valve for compressed air. Brass and NBR. 1/2" (F). 24 V DC. Normally closed type. ...

See the other products
SAMOA Industrial, S.A.
ball valve
ball valve
FLX

... FLUSHING VALVE Flushing valve FLX constructed in cast iron, to be installed directly on the pump casing by means of a threaded coupling. This type of valve operates on the "Venturi" principle and does ...

knife gate valve
knife gate valve
SRP

... Knife gate valves [SRP] in EN-GJL-250 cast iron with bronze blade seat for perfectly smooth travel even after long periods out of use. Flanges meet the UNI standards for perfect interchangeability with the pipelines of existing systems. ...

electric valve
electric valve
TJ-1240901

DN: 1.96 in
Pressure: 60 psi

... Single passage rotary timing valve designed to supply peracetic acid (PAA) for a PET bottle washing application. Features include a custom timing valve design to supply PAA media to 36 nozzles under a specific degree ...

ball valve
ball valve
RKE series

DN: 0.5 mm - 2 mm
Pressure: 30, 40, 65 bar

... The RKE electric ball valve automatically opens or closes the compressed air tank via the control unit or connects and closes areas of the network from the compressed air supply as required. This prevents e.g. an unnecessary start-up ...

lift valve
lift valve

DN: 0.25 in
Pressure: 350, 300 bar
Temperature: -20 °C - 80 °C

... additional valve block. Flow divider valve kit: main features Complete kit Additional block for flow divider valve Flow divider valve VDRF101 Oil port G1/4 15µm valve ...

spray valve
spray valve
500S

... 500S valve is solenoid operated for precise glue patterns at high machine speeds. the valve is used to atomize adhesive. The valve features a zero-cavity plunger/seat design to prevent clogging and has ...

spray valve
spray valve
472A

... The Model 472A Spray Valve is an air-open/spring-closed spray valve available in brass or stainless steel. The valve features metering adjustment of output volume and a choice of air-cap style (round ...

control valve
control valve

... We offer various control valves for our air motors that allow you to easily change the rotation direction. We supply proportional control valves, which are mounted directly onto the motor and allow you to control both ...

pressure valve
pressure valve

DN: 0 mm - 10,000 mm
Pressure: 0 bar - 10 bar

... In cooperation with HiP High Pressure Equipment, we offer an extensive range of valves — also known as high pressure valves. With pressures up to 10,000 bar (150,000 psi), we provide a suitable solution for every application. ...

injection valve
injection valve
AVE02006

DN: 0.4 mm
Pressure: 345 bar

... A stainless steel two-position valve with a needle injection port on the front side. This valve offers the No-Flow-Interruption technology which reduces pressure spikes during position switching to a minimum. It has ...

pressure valve
pressure valve
SY2032022

DN: 1.5 mm
Pressure: 250 bar

... A stainless steel two-position valve with needle injection port on the front side. This valve offers the No-Flow-Interruption technology which reduces pressure spikes during position switching to a minimum. It has ...

electrically-actuated valve
electrically-actuated valve
V-316

DN: 6.35 mm - 25.4 mm
Pressure: 14, 12 bar

... Product overview
The V-316 valve series provides a range of modular control valves designed for demanding industrial and corrosive environments. Constructed in stainless steel internally and externally, the ...

See the other products
Terry Ferraris
pneumatic valve
pneumatic valve
Valvole V & T

DN: 0.125 in - 1.25 in
Pressure: 0 bar - 35 bar
Temperature: -51 °C - 150 °C

... Pressure control valves for pneumatic and hydraulic systems. V Series for pneumatic applications; T Series for hydraulic applications.

Table
Function: Pressure control
Detection: Valves
Technology: ...

See the other products
Terry Ferraris
pneumatic valve
pneumatic valve
E series

DN: 1.2 mm - 6.35 mm
Pressure: 2.7 bar - 34 bar
Temperature: -40 °C - 90 °C

... br>Versa E-series valves are direct-acting pneumatic and hydraulic valves available in side-port (individually mounted) and manifold-mounted versions. Side-port valves have body sizes from 1/8" NPT to ...

See the other products
Terry Ferraris
exhibit your products

& reach your clients in one place, all year round

Exhibit with us
DirectIndustry RFQ: Free quotation comparison tool
Receive and compare quotations for free
Describe your project
We select
the best suppliers
Compare quotations and complete your purchase