Washers

Internal diameter: 6.35 mm
External diameter: 203 mm

SPIROL Thrust Washers feature less wear and longer life for reduced serviceability costs. Thrust Washers look like many other washers, but are actually used in conjunction with bearings ...

Internal diameter: min 1.2 mm
External diameter: max 1220.0 mm
Thickness: min 1.5 mm

SPIROL manufactures specialty Precision Shim Washers and Spacers in any flat configuration with thicknesses ranging from 0.02mm to 6mm (.001” to .250”) to meet the requirements of unique applications. Most secondary processes ...

Rings in EPDM and silicone Manufacturer: Gimatic 13TYPES AVAILABLE

Internal diameter: 15 mm - 58 mm
External diameter: 28.4 mm - 108.71 mm
Thickness: 3.1 mm - 7.6 mm

... HYTORC J-Washer takes the HYTORC Reaction Washer to an entirely new level by adding a locking feature that minimizes loosening to keep bolts tight under dynamic loads. With the strategic placement of ...

... prevention. Safety The HYTORC Reaction Washers eliminates the need for reaction arms, which are the most common cause of injury on bolting jobs. The unique design of the washer allows the dual socket ...

Internal diameter: 4 mm - 16 mm
External diameter: 8 mm - 30 mm
Thickness: 1 mm - 5 mm

Washers / Levelling disks GN 6343 are used mainly in mechanical engineering and jigmaking if shimming is required for levelling. Specification Stainless SteelNI AISI 304 turned, blank

Internal diameter: 8 mm - 12 mm
External diameter: 32 mm
Thickness: 14 mm

Used in connection with clamping screws, e.g. star knob screws, washer rings with axial ball bearing GN 6344 have the following advantages: - as much as twice the clamping force through lower surface friction - fixed ...

Internal diameter: 6.4 mm - 56 mm
External diameter: 12 mm - 92 mm
Thickness: 2.3 mm - 22 mm

Stainless Steel-Spherical washers DIN 6319 are used for clamping on non-parallel surfaces. When utilizing Stainless Steel-Hexagon nuts with spherical seating DIN 6330 type B the male washer is redundant.

Internal diameter: 6.6 mm - 33 mm
External diameter: 25 mm - 80 mm
Thickness: 27 mm - 79 mm

... blue passivated. Stainless steel version bright.Note:The spherical washer levelling set is used to mount and align motors, aggregates, drive units and production lines. The spherical washer gives exact ...

Internal diameter: 7.1 mm - 35 mm
External diameter: 12 mm - 56 mm
Thickness: 2.8 mm - 12 mm

... EXECUTIONS - DIN 6319-C-NI: convex washer, AISI 303 stainless steel. - DIN 6319-C-A4: convex washer, AISI 316 stainless steel. - DIN 6319-D-NI: concave washer, AISI 303 stainless steel. - ...

Internal diameter: 6.5 mm - 12 mm
External diameter: 20 mm - 32 mm
Thickness: 4 µm - 6 µm

The insulating washers are made from red or black thermoplastic. Both the black and red colors are available in stock. The insulating washers are available in diameters ranging from 8 to 12.5 mm. Designed ...

Internal diameter: 4.3 mm - 31.02 mm
External diameter: 8.6 mm - 56 mm
Thickness: 2 mm - 6.3 mm

... LOCK® product line involves lock washers, screws and nuts RIPP LOCK® lock washer RIPP LOCK® screw lock is provided with radial ribs and replaces such locking elements as spring washers ...

... LOCK® guarantees lasting retention of preload force in the threaded connection, even under high dynamic stress. RIPP LOCK® washers, screws and nuts are mechanical locking elements which are proven to prevent fasteners ...

... threaded connections and effectively prevents spontaneous loosening, even under strong vibrations. Nord-Lock wedge-locking washers are mechanical machine elements. They secure threaded connections under vibration by ...

Internal diameter: 4.9 mm
External diameter: 10 mm
Thickness: 0.8 mm

Natural Nylon Flat Washer - 4.9 mm | 0.193 in Inside Diameter, 10.0 mm | 0.394 in Outside Diameter This Nylon washer has an outside diameter of 10.0 mm | 0.394 in and a thickness of 0.8 mm | 0.031 ...

Internal diameter: 4.3 mm
External diameter: 10 mm
Thickness: 0.8 mm

Black TPR Flat Washer - 4.3 mm | 0.169 in Inside Diameter, 10.0 mm | 0.394 in Outside Diameter This TPR washer has an outside diameter of 10.0 mm | 0.394 in and a thickness of 0.8 mm | 0.031 in. They ...

Internal diameter: 3.2 mm - 17 mm
External diameter: 8 mm - 32 mm
Thickness: 0.8 mm - 3 mm

Made from HDPE Colour: Natural With retention feature Holds screws in place Resistant to chemicals, excellent electrical insulation

Internal diameter: 2.2 mm - 31.4 mm
External diameter: 4 mm - 52 mm
Thickness: 0.5 mm - 4 mm

PLAIN WASHER TYPE Z - STAINLESS STEEL A2 - NFE 25-514 INOX A2 - NFE 25-514

Internal diameter: 5.3 mm - 13 mm
External diameter: 10 mm - 20.5 mm
Thickness: 1.2 mm - 2 mm

INTERNAL TOOTHED LOCK WASHER - STAINLESS STEEL A2 - DIN 6797 J INOX A2 - DIN 6797 J

Internal diameter: 2.3 mm - 31.4 mm
External diameter: 4.5 mm - 48 mm
Thickness: 0.3 mm - 1.6 mm

SERRATED LOCK WASHER EXTERNAL TEETH - STAINLESS STEEL A2 - DIN 6798 A - NF E 27-624 INOX A2 - DIN 6798 A - NFE 27-624

The protective shield is used when through-holes must be set in the area of the module cover. As a result, the module cover is protected from damage.

Internal diameter: 7.1 mm - 56 mm
External diameter: 12 mm - 92 mm

Case hardened. Designed for screw solidity in compliance with 8.8. Limited for use on flat closed ring areas (not allowed for elongated holes, we recommend DIN 6319G for these).

Washers made of tungsten for high temperature furnaces are available in the Plansee Online Shop. Order fast and easily from the producer's online shop: www.plansee.com/shop Whether for annealing furnaces and soldering ...

Washers made of molybdenum are available in the Plansee Online Shop. Order fast and easily from the producer's online shop: www.plansee.com/shop

Engineered Plastic Thrust Washer - Good bearing performance in light duty working conditions - Good performance in lubricated or marginally lubricated applications - Corrosion resistant in humid/saline environments - ...

... materials used in spacecraft equipment. Bearing forms available in standard dimensions: plain thrust washers Bearing forms made to order: thrust washers with non-standard dimensions.

Internal diameter: 0.2 in - 0.78 in
External diameter: 0.5 in - 1.625 in
Thickness: 0.188 in - 0.375 in

These washers are ideally suited for joining machine sections which are out of parallel. They adjust themselves for a positive, firm base. With radius “E” and the angular 140 combination, line contact is formed around ...

Internal diameter: 0.2 in - 0.78 in
External diameter: 0.5 in - 1.5 in
Thickness: 0.093 in - 0.15 in

Flat Washers Material: 1010 Cold Rolled; 303 stainless Finish: Black Oxide Heat Treat: Carbon Nitride to 60 Flat and parallel within .005" (0.13mm) Available in FixtureProTM Design Software and PartSpec CD Part Drawings

Internal diameter: 0.28 in - 1.06 in
External diameter: 0.75 in - 2.5 in
Thickness: 0.14 in - 0.25 in

... conforms to USS standards. This provides a washer that is up to 36% larger than standard hardened washers. USAE Washers are also up to 37% thicker than standard hardened washers ...

Internal diameter: 13 mm - 25 mm
External diameter: 14.2 mm - 28 mm
Thickness: 4.6 mm - 10 mm

The spherical washers set of M12, M16, M20, M24, and M30 are developed by AirLoc Schrepfer AG. They are specifically designed for inclined position adjustment of anchor bolts. This position can be attained by using bolt ...

Internal diameter: 13 mm - 38 mm
External diameter: 40 mm - 110 mm
Thickness: 8 mm - 23 mm

... is an isolating washer from Airloc. The unit is used for vibration decoupling of anchor bolts. It is designed for M10 - M12 studs. It also has an outer diameter of 40 mm and an inner diameter of 13 mm. Furthermore, the ...

Internal diameter: 13 mm - 38 mm
External diameter: 40 mm - 110 mm
Thickness: 8 mm - 23 mm

The N915 series isolating washer is ideally used when dealing with applications that are concerned with the vibration decoupling of anchor bolts. This unit utilizes bolt-through Jacmount Adjustable Levelers and Wedgemount ...

TOOTHED PLATE CONNECTOR EN 912 (DIN1052) | TYPE C 11 SINGLE-SIDED AND C 10 DOUBLE-SIDED Complete formation of the pin as per DIN 1052, only possible due to natural sand production Final inspection for cracking and missing ...

Internal diameter: 8 mm - 13 mm
External diameter: 40 mm
Thickness: 3 mm

PACKAGING:100 pcs/box MATERIAL:Steel, minimum hardness 130 HB galvanised as per DIN EN ISO 4042, stainless steel A4, further dimensions and finishes on request All of the dimensions stated above are approximate and may deviate both ...

Thickness: 7 mm

Semi-circular washer Malleable cast iron EN-6JMB-350-10 23 x 26 x 7 mm With hole

The ideal profile system MayTec offers a comprehensive and integrated profile system where profiles can be connected in any way you may require.

Internal diameter: 4 mm - 10 mm

Bended washer *** Also available in stainless steel material

Internal diameter: 16 mm - 52 mm
External diameter: 4.5 mm - 6.6 mm
Thickness: 3 mm - 6 mm

The EH 22270 Series of Washer is manufactured by Halder, and is designed with a material of stainless steel 1.4305 design. Moreover, this product is available in free cutting steel, unhardened, blackened materials.

Internal diameter: 7.5 mm - 32 mm
External diameter: 38 mm - 97 mm
Thickness: 9.8 mm - 15.8 mm

Material Countersunk screw Steel, blackened, quality 5.8 Captive C-Washer Heat-treated steel, tempered, blackened

Internal diameter: 8.4 mm - 17 mm

Spherical washers / Conical seats are used as washers in a screw connection to compensate non-parallel surfaces. Material Spherical washer Case-hardened steel, case-hardened, ...

Internal diameter: 4.3 mm - 12 mm
External diameter: 16 mm - 52 mm
Thickness: 3 mm - 6 mm

Internal diameter: 4 mm - 12 mm
External diameter: 10 mm - 40 mm
Thickness: 2.5 mm - 7.5 mm

Internal diameter: 7.5 mm - 32 mm
External diameter: 38 mm - 97 mm
Thickness: 9.8 mm - 15.8 mm

... Steel Lacing Anchors Washers are used for thermal insulation products, like expansion joints and removable-reusable thermal insulation blankets. Stainless Steel Lacing Anchors Washers Generally stainless ...

External diameter: 10 mm - 14 mm
Thickness: 0.016 in

... Steel Round Self-Locking Washers is used in conjunction with weld pins, insulation anchors and lacing anchors to fasten insulation in place. Product Part Number Diameter Length Thickness GA Inch Inch Round Self-Locking ...

Internal diameter: 3.2 mm - 13 mm
External diameter: 7 mm - 24 mm
Thickness: 0.5 mm - 2.5 mm

... chambers, FPD production equipment, semiconductor devices, and electron microscopes SWAS-VF (flat washer with ventilation groove) SWAS-VF-PC (flat washer with ventilation groove, chemical polishing included) Please ...

Internal diameter: 3.2 mm - 18.8 mm
External diameter: 7 mm - 30 mm
Thickness: 2.2 mm - 5.3 mm

SWS is a stainless steel sealing washer with a built-in rubber seal. Washers prevent the leakage of gas and liquid from the bearing surface of the screw head. Test results for JIS C 0920 protection ...

Internal diameter: 6.05 mm - 12.2 mm
External diameter: 12 mm - 24 mm
Thickness: 3.9 mm - 7.5 mm

... eccentric lock washer™. Vibration resistant treatment effect can be achieved simply by using commercially available hexagon nuts. Hexagon nuts can be tightened by hand until tightening force applies, for simple mounting. Use ...